曹勤, 徐龙祥．基于有限元的磁悬浮轴承支承转子的模态分析研究[J]．机械工程师, 2009(1)：76-77． Cao Qin, Xu Longxiang．Research on the AMB-system dynamics properties caused by flexible foundation[J]．Manufacturing Informatization, 2009(1)：76-77(in Chinese)．
[2]
王天煜, 王凤翔, 方程, 等．高速电机转子临界转速计算与振动模态分析[J]．辽宁工程技术大学学报：自然科学版, 2009(5)：805-808． Wang Tianyu, Wang Fengxiang, Fang Cheng, et al．Critical speed calculation and mode analysis of rotor for high speed motor[J]．Journal of Liaoning Technical University：Natural Science, 2009(5)：805-808(in Chinese)．
[3]
王继强, 王凤翔, 宗鸣．高速电机磁力轴承-转子系统临界转速的计算[J]．中国电机工程学报, 2007, 27(27)：94-98． Wang Jiqiang, Wang Fengxiang, Zong Ming．Critical speed calculation of magnetic bearing-rotor system for a high speed machine[J]．Proceedings of the CSEE, 2007, 27(27)：94-98(in Chinese)．
[4]
Chen S Y, Kung C, Liao T T, et al．Dynamic analysis of a rotary hollow shaft with hot-fit part using contact elements with friction[J]．Transactions of the Canadian Society for Mechanical Engineering, 2011, 35(3)：461-474．
[5]
Kanto Y, Yagawa G．A dynamic contact buckling analysis by the penalty finite element method[J]．International Journal for Numerical Methods in Engineering, 1990, 29(4)：755-774．
[6]
李克雷, 谢振宇．基于 ANSYS 的磁悬浮转子的模态分析[J]．机电工程, 2008, 25(1)：1-3． Li Kelei, Xie Zhenyu．Model analysis of the magnetic suspension rotor based on ANSYS[J]．Journal of Mechanical & Electrical Engineering, 2008, 25(1)：1-3(in Chinese)．
[7]
Yan W, Komvopoulos K．Contact analysis of elastic-plastic fractal surfaces[J]．Journal of Applied Physics, 1998, 84(7)：3617-3624．
[8]
艾延廷, 翟学, 王志, 等．法向接触刚度对装配体振动模态影响的研究[J]．振动与冲击, 2012, 31(6)：171-174． Ai Yanting, Zhai Xue, Wang Zhi, et al．Influences of normal contact stiffness on an assembly's vibration modes[J]．Journal of Vibration and Shock, 2012, 31(6)：171-174(in Chinese)．
[9]
钟一谔, 何衍宗, 王正, 等．转子动力学[M]．北京：清华大学出版社, 1987：143-206． Zhong Yie, He YanZong, Wang Zheng, et al．Rotor dynamics[M]．Beijing：Tsinghua University Press, 1987：143-206(in Chinese)．
[10]
Johnson K L．Contact mechanics[M]．Cambridge：Cambridge University Press, 1987：96-165．
[11]
Schweitzer G, Maslen E H．Magnetic bearings：theory, design, and application to rotating machinery[M]．Springer, 2009：20-70．
[12]
Alghamdi A A A, Kamath G, Marks G．Vibration analysis of a bearingless rotor using component mode synthesis method[J]．European Journal of Mechanical and Enviromental Engineering, 2000, 45(2)：79-86．
[13]
秦然, 张建伟．转子临界转速的求解方法比较[J]．沈阳化工学院学报, 2007, 21(1)：74-76． Qin Ran, Zhang Jianwei．Comparison of rotor critical rotation speeds solution method[J]．Journal of Shenyang Institute of Chemical Technology, 2007, 21(1)：74-76(in Chinese)．
[14]
Wang W, Tang Q, Xu X, et al．Finite element analysis of normal contact stiffness between real rough surfaces based on ANSYS[C]//2012 Fourth International Conference on Computational and Information Sciences(ICCIS)．Chongqing, China：IEEE, 2012：127-130．
[15]
Chen S Y, Yang S K．The optimal study of finite element modeling for a high speed hollow shaft with a hot-fitted motor rotor[C]//2010 International Symposium on Computer Communication Control and Automation (3CA)．Tailand, China：IEEE, 2010：298-300．
[16]
代颖, 崔淑梅, 宋立伟．车用电机的有限元模态分析[J]．中国电机工程学报, 2011, 31(9)：100-104． Dai Ying, Cui Shumei, Song Liwei．Finite element method modal analysis of driving motor for electric vehicle[J]．Proceedings of the CSEE, 2011, 31(9)：100-104(in Chinese)．
[17]
Whitehouse D J, Archard J F．The properties of random surface of significance in their contact[J]．Proceedings of the Royal Society of London．Series A, Mathematical and Physical Sciences, 1970, 316(1524)：97-121．
[18]
万金贵, 汪希平, 李文鹏, 等．电磁轴承支承的透平膨胀机转子系统模态分析[J]．机械工程学报, 2010(19)：86-91． Wan Jingui, Wang Xiping, Li Wenping, et al．Modal analysis of turbo expander rotor supported by active magnetic bearings[J]．Journal of Mechanical Engineering, 2010(19)：86-91(in Chinese)．
[19]
Jamari J, Schipper D J．Deformation due to contact between a rough surface and a smooth ball[J]．Wear, 2007, 262(1)：138-145．
[20]
苏春峰, 艾延廷, 娄小宝．接触非线性仿真中接触刚度因子选取的方法研究[J]．沈阳航空工业学院学报, 2009, 26(3)：5-9． Su Chunfeng, Ai Yanting, Lou Xiaobao．Study on contact stiffness factor selection method in contact non-linear simulation[J]．Journal of Shenyang Institute of Aeronautical Engineering, 2009, 26(3)：5-9(in Chinese)．
