张翼飞, 仝晓龙．液化天然气(LNG)输送泵的特点与应用[J]．水泵技术, 2006(6)：38-40． Zhang Yifei, Tong Xiaolong．Characteristics and applications of the liquid natural gas (LNG) pump[J]．Pump Technology, 2006(6)：38-40(in Chinese)．
[2]
顾安忠, 鲁雪生, 汪荣顺．液化天然气技术[M]．北京：机械工业出版社, 2004：170-178． Gu Anzhong, Lu Xuesheng, Wang Rongshun．Liquefied natural gas technology[M]．Beijing：China Machine Press, 2004：170-178(in Chinese)．
[3]
罗资琴, 任永平, 陈叔平, 等．LNG低温潜液泵结构及设计分析[J]．低温技术, 2012, 40(7)：13-16． Luo Ziqin, Ren Yongping, Chen Shuping, et al．Structure and design analysis of submerged LNG cryopump[J]．Cryogenics, 2012, 40(7)：13-16(in Chinese)．
[4]
谭宏博, 厉彦忠, 梁骞, 等．液化天然气潜液泵关键技术及研发方案[J]．现代化工, 2007, 27(12)：52-54． Tan Hongbo, Li Yanzhong, Liang Qian, et al．Key technologies and research schemes for submerged pumps for liquefied natural[J]．Modern Chemical Industry, 2007, 27(12)：52-54(in Chinese)．
[5]
孙晓玲, 刘忠明, 张燕．液化天然气潜液泵的研制[J]．低温工程, 2010, 174(2)：20-23． Sun Xiaoling, Liu Zhongming, Zhang Yan．Research and development of LNG submerged pump[J]．Cryogenics, 2010, 174(2)：20-23(in Chinese)．
[6]
王文廷, 孔繁余, 周水清, 等．低温屏蔽泵技术[J]．低温工程, 2010, 174(2)：51-54． Wang Wenting, Kong Fanyu, Zhou Shuiqing, et al．Technology of cryogenic canned pump[J]．Cryogenics, 2010, 174(2)：51-54(in Chinese)．
[7]
祝勇仁, 张炜, 王循明．LNG汽车加气站用潜液泵研制[J]．机械科学与技术, 2012, 31(1)：163-166． Zhu Yongren, Zhang Wei, Wang Xunming．Research and development of LNG submerged pump for LNG car gas station[J]．Mechanical Science and Technology for Aerospace Engineering, 2012, 31(1)：163-166(in Chinese)．
[8]
梁骞, 厉彦忠, 谭宏博, 等．潜液式 LNG 泵的结构特点及其应用优势[J]．天然气工业, 2008, 28(2)：123-125． Liang Qian, Li Yanzhong, Tan Hongbo, et al．Structure characteristics and application edges of submersible LNG pumps[J]．Natural Gas Industry, 2008, 28(2)：123-125(in Chinese)．
[9]
Rush S, Hall L．Tutorial on cryogenic submerged electric motor pumps[C]//Proceedings of the International Pump Users Symposium．Houston, USA：The Turbomachinery Laboratory at Texas A&M University, 2001：101-107．
[10]
Dlugiewicz L, Kolowrotkiewicz J, Szelag W, et al．Electrical motor for liquid gas pump[C]//International Symposium on Power Electronics, Sicily, Italy：Nagasaki University, University of Napoli, University of Cassino and University of Catania, 2006：28-33．
[11]
Baranski M, Szelag W．Finite-element analysis of transient electromagnetic-thermal phenomena in a squirrel-cage motor working at cryogenic temperature[J]．IET Science, Measurement & Technology, 2012, 6(5)：357-363．
[12]
Kolowrotkiewicz J, Baranski M, Szeleg W, et al．FE analysis of induction motor working in cryogenic temperature[J]．COMPEL： The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2007, 26(4)：952-964．
Shively R, Miller H．Development of a submerged winding induction generator for cryogenic applications[C]//Conference Record of the 2000 IEEE International Symposium on Electrical Insulation．Anaheim, USA：IEEE, 2000：243-246．
[15]
马淋军, 王宇成, 许广举, 等．低温环境下车用启动电机工作特性仿真与结构优化[J]．拖拉机与农用运输车, 2009, 36(6)：61-63． Ma Linjun, Wang Yucheng, Xu Guangju, et al．Operating characteristics smiulation and structural optimization of vehicle starter under low temperature[J]．Tractor & Farm Transporter, 2009, 36(6)：61-63(in Chinese)．
[16]
王忠, 许广举, 叶飞飞, 等．低温环境下车用起动电机的匹配研究[J]．兵工学报, 2010(5)：529-533． Wang Zhong, Xu Guangju, Ye Feifei, et al．Experimental study on matching of vehicle engine starter under low temperature[J]．Acta Armamentar II, 2010(5)：529-533(in Chinese)．
[17]
Zheng Liping．Super high-speed miniaturized permanent magnet synchronous motor[D]．Florida：University of Central Florida, 2005．
[18]
Zheng Liping, Wu T X, Acharya D, et al．Design of a super high-speed cryogenic permanent magnet synchronous motor[J]．IEEE Transactions on Magnetics, 2005, 41(10)：3823-3825．
[19]
Dlugiewicz L, Kolowrotkiewicz J, Szelag W, et al．Permanent magnet synchronous motor to drive propellant pump[C]//International Symposium on Power Electronics, Electrical Drives, Automation and Motion．Sorrento, Italy：IEEE, 2012：822-826．
[20]
Jiang X N, Rehrig P W, Hackenberger W S, et al．Single crystal ultrasonic motor for cryogenic actuations[C]//IEEE International Ultrasonics, Ferroelectrics, and Frequency Control Joint 50th Anniversary Conference．Montreal, Canada：IEEE, 2004：1314-1317．
[21]
Yamaguchi D, Kanda T, Suzumori K．Design and evaluation of ultrasonic motor located in cryogenic temperature environments[C]//IEEE International Ultrasonics Symposium Proceedings．Orlando, USA：IEEE, 2011：1214-1217．
[22]
周宁宁．面向真空低温下超声波电机的振动摩擦与悬浮特性研究[D]．哈尔滨：哈尔滨工业大学, 2011． Zhou Ningning．Research on friction and levitation characteristics with vibration in ultrasonic motor under vacuum and low temperature condition[D]．Harbin：Harbin?Institute?of?Technology, 2011(in Chinese)．
[23]
郑伟, 赵淳生．低温环境下超声电机定子特性[J]．南京航空航天大学学报, 2009, 41(1)：1-5． Zheng Wei, Zhao Chunsheng．Stator characteristics of ultrasonic motors under low temperature condition[J]．Journal of Nanjing University of Aeronautics & Astronautics, 2009, 41(1)：1-5(in Chinese)．
[24]
芦小龙, 丁庆军, 李华峰, 等．行波型旋转超声电机的低温特性[J]．振动、测试与诊断, 2010, 30(5)：529-533． Lu Xiaolong, Ding Qingjun, Li Huafeng, et al．Cryogenic temperature performance of traveling wave ultrasonic motor[J]．Journal of Vibration, Measurement & Diagnosis, 2010, 30(5)：529-533(in Chinese)．
[25]
王金鹏, 时运来, 薛雯玉, 等．高低温环境下超声电机伺服控制系统的性能[J]．振动、测试与诊断, 2011, 31(3)：291-294． Wang Jinpeng, Shi Yunlai, Xue Wenyu, et al．Performance of ultrasonic motor servo control system under high and low temperature[J]．Journal of Vibration, Measurement & Diagnosis, 2011, 31(3)：291-294(in Chinese)．
[26]
Kovalev L K, Ilushin K V, Penkin V T, et al．The development of a pump for a liquid cryogen with a high temperature superconductor electrical drive[J]．Superconductor Science and Technology, 2004, 17(5)：460-464．
[27]
Kajikawa K, Nakamura T．Proposal of a fully superconducting motor for liquid hydrogen pump with MgB2 wire[J]．IEEE Transactions on Applied Superconductivity, 2009, 19(3)：1669-1673．
[28]
Brown G V．Cryogenic Electric Motor Tested．Houston, Tex：NASA research article, 2005[2013-06-．http:// www.grc.nasa.gov/WWW/RT/2003/5000/5930brown.html．
[29]
Gerada D, Mebarki A, Brown N L, et al．Design aspects of high-speed high-power-density laminated-rotor induction machines[J]．IEEE Transactions on Industrial Electronics, 2011, 58(9)：4039-4047．
[30]
Lovelady J．LNG pump applications with variable speed motor controls[C]//Topical Conference on Natural Gas Utilization．Houston, USA：American Institute of Chemical Engineers, 2008：152-159．
[31]
Marino R, Peresada S, Tomei P．Global adaptive output feedback control of induction motors with uncertain rotor resistance[J]．IEEE Transactions on Automatic Control, 1999, 44(5)：967-983．
[32]
Garces L J．Parameter adaption for the speed-controlled static ac drive with a squirrel-cage induction motor[J]．IEEE Transactions on Industry Applications, 1980, IA-16(2)：173-178．
[33]
Kubota K, Matsuse K．Speed sensorless field-oriented control of induction motor with rotor resistance adaptation[J]．IEEE Transactions on Industry Applications, 1994, 30(5)：1219-1224．
[34]
中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会．GB/T 1032—2012 三相异步电动机试验方法[S]．北京：中国标准出版社, 2012． General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China．GB/T 1032—2012 Three-phase asynchronous motor test method[S]．Beijing：Standard Press of China, 2012(in Chinese)．
