江生科．600 MW空冷两排汽汽轮机低压排汽缸气动设计研究[C]//中国动力工程学会透平专业委员会2011年学术研讨会论文集．上海:中国动力工程学会透平专业委员会,2011:139-144． Jiange Shengke．Aerodynamic design research of low-pressure exhaust hood in 600 MW air-cooling double flow steam turbine[C]//Conference Proceedings of Professional Committee of the Turbine of CSPE in 2011．Shanghai: Professional Committee of the Turbine of CSPE,2011:139-144(in Chinese)．
[2]
Michal H,Ladislav T,Jaroslac K,et al．Exhaust hood for steam turbines-single flow arrangement[C]//Proceedings of the second ISJPPE,Guilin,2008:530-537．
[3]
徐旭,康顺,蒋洪德．低压蒸汽透平排汽缸内三维粘性流动的数值模拟[J]．工程热物理学报,2000,7(4):430-433． Xu Xu,Kang Shun,Jiang Hongde．Numerical simulation of the 3D viscous flow in the exhaust casing of a low pressure steam burbine[J]．Journal of Engineering Thermophysics,2000,7(4):430-433(in Chinese)．
[4]
谢伟亮,王红涛,竺晓程,等．汽轮机低压排汽缸内流场的PIV实验研究[J]．实验流体力学,2011,10(5):64-69． Xie Weiliang,Wang Hongtao,Zhu Xiaocheng,et a1．PIV experimental investigation of the flow field in a low- pressure exhaust hood of a steam turbine[J]．Journal of Experiments in Fluid Mechanics,2011,10(5):64-69(in Chinese)．
[5]
曹丽华,刘佳,李勇,等．考虑湿蒸汽行为的汽轮机排汽缸内流动的三维数值研究[J]．中国电机工程学报,2012,32(29):79-86． Cao Lihua,Liu Jia,Li Yong,et al．3D numerical analysis of wet steam flow in exhaust hoods of steam turbines [J]．Proceedings of the CSEE,2012,32(29):79-86(in Chinese)．
[6]
崔国民,蔡祖恢,李美玲．凝汽器喉部内置低压加热器的合理布置研究[J]．动力工程,2001,21(3):1233-1236． Cui Guomin,Cai Zuhui,Li Meiling．Study on optimal place of inner low-pressure heater in throat of condenser [J]．Power Engineering．2001,21(3):1233-1236(in Chinese)．
[7]
曹丽华,张仲彬,李勇,等．具有内置式加热器的凝汽器喉部流场的数值模拟[J]．动力工程,2006,26(3):400-402,451． Cao Lihua,Zhang Zhongbin,Li Yong,et a1．Numerical simulation of a condenser throats flow field containing an inserted heater[J]．Journal of Power Engineering,2006,26(3):400-402,451(in Chinese)．
[8]
周兰欣,李富云,白中华,等．内置式加热器的凝汽器喉部的三维数值研究[J]．汽轮机技术,2007,49(6):432-434,438． Zhou Lanxin,Li Fuyun,Bai Zhonghua,et a1．Three dimension values research of interior condenser throat ministry[J]．Turbine Technology,2007,49(6):432-434,438(in Chinese)．
[9]
曹丽华,郭婷婷,李勇．300MW汽轮机凝汽器喉部出口流场的三维数值模拟[J]．中国电机工程学报,2006,26(11):56-59． Cao Lihua,Guo Tingting,Li Yong．Three-dimensional numerical simulation of the outlet flow field of the 300MW steam turbine’s condenser throat[J] ．Proceedings of the CSEE,2006,26(11):56-59(in Chinese)．
[10]
崔国民,关欣,李美玲,等．凝汽器喉部扩散角对其性能的影响研究[J]．中国电机工程学报,2003,23(5):181-183． Cui Guomin,Guan Xin,Li Meiling,et al．Study on the influence of diffuse-angle of condenser throat upon its properties[J]．Proceedings of the CSEE,2003,23(5):181-183(in Chinese)．
[11]
竺晓程,王红涛,杜占波,等．汽轮机低压排汽缸内辅助板块对其性能影响的数值研究[J]．热力透平,2007,36(1):8-10． Zhu Xiaocheng,Wang Hongtao,Du Zhanbo,et a1．Numerical investigation on the performance of exhaust hood of steam turbine with or without accessorial structure [J]．Thermal Turbine,2007,36(1):8-10(in Chinese)．
[12]
谢伟亮,王红涛,竺晓程,等．汽轮机低压排汽缸内导流挡板对其性能影响的分析[J]．动力工程学报,2011,31(5):347-351． Xie Weiliang,Wang Hongtao,Zhu Xiaocheng,et al．Influence of baffle arrangement on performance of related low-pressure exhaust hood of steam turbines [J]．Chinese Journal of Power Engineering,2011,31(5):347-351(in Chinese)．
[13]
曹丽华,刘佳,陈洋,等．汽轮机凝汽器喉部与排汽缸耦合流动的数值模拟[J]．汽轮机技术,2011,53(2):92-94． Cao Lihua,Liu Jia, Chen Yang,et a1．Numerical simulation of condenser throat coupling with the exhaust hood in steam turbine[J]．Turbine Technology,2011,53(2):92-94(in Chinese)．
[14]
Miroslav S,Ladislav T．Effects of inlet swirl on the flow in a steam turbine exhaust hood[J]．Journal of Thermal Science,2000,9(4):327-333．
[15]
Fu J L,Liu J J．Influences of inflow condition on non- axisymmetric flows in turbine exhaust hoods[J]．Journal of Thermal Science,2008,17(4):305-313．
[16]
樊涛,谢永慧,张荻,等．汽轮机低压排汽缸与末两级耦合流动的三维数值模拟[J]．中国电机工程学报,2007,27(26):90-95． Fan Tao,Xie Yonghui,Zhang Di,et al．Combined 3D numerical analysis of the low pressure exhaust hood coupling with the last two cascades in steam turbine [J]．Proceedings of the CSEE,2007,27(26):90-95(in Chinese)．
[17]
王福军．计算流体动力学分析[M]．北京:清华大学出版社,1994:63-65． Wang Fujun．Coputational fluid dynamics analysis [M]．Beijing:Tsinghua University Press,1994:63-65(in Chinese)．
[18]
陶红歌,陈焕新,谢军龙,等．基于面积加权平均速度和质量加权平均速度的流体流动均匀性指标探讨[J]．化工学报,2010,12(6):116-120． Chen Hongge,Chen Huanxin,Xie Junlong,et a1．Flow uniformity index based on area-weighted and mass- weighted average velocity[J]．CIESC Journal,2010,12(61):116-120(in Chinese)．
[19]
周兰欣,李富云,李卫华．凝汽器壳侧准三维数值研究[J]．中国电机工程学报,2008,28(23):25-30． Zhou Lanxin,Li Fuyun,Li Weihua．Quasi three dimensional numerical study of shell side of condenser [J]．Proceedings of the CSEE,2008,28(23):25-30(in Chinese)．
[20]
沈士一,庄贺庆,康松,等．汽轮机原理[M]．北京:中国电力出版社,1991:104-109． Shen Shiyi,Zhuang Heqing,Kang Song,et al．Principles of steam turbine[M]．Beijing:China Electric Power Press,1991:104-109(in Chinese)．
