Tong Wenming,Wu Shengnan,An Zhongliang,et al．Thermal analysis of direct-drive permanent magnet wind generator using both lumped parameter network and finite element method[C]//2010 Asia-Pacific Power and Energy Engineering Conference (APPEEC)．Chengdu,China：IEEE,2010：1-4．
[2]
Fan Jinxin,Zhang Chengning,Wang Zhifu,et al．Thermal analysis of water cooled surface mount permanent magnet electric motor for electric vehicle[C]//2010 International Conference on Electrical Machines and Systems (ICEMS)．Incheon,Korea：IEEE,2010：1024-1028．
[3]
Ponomarev P,Polikarpova M,Pyrhönen J．Thermal modeling of directly-oil-cooled permanent magnet synchronous machine[C]//2012 International Conference on Electrical Machines (ICEM)．Marseille,France：IEEE,2012：1882-1887．
[4]
Staton D A,Cavagnino A．Convection heat transfer and flow calculations suitable for electric machines thermal models[J]．IEEE Transactions on Industry Electronics,2008,55(10)：3509-3516．
[5]
黄苏融,张琪,谢国栋,等．燃料电池轿车用高密度无刷永磁牵引电动机[J]．机械工程学报,2005,41(12)：69-75． Huang Surong,Zhang Qi,Xie Guodong,et al．High density brushless permanent magnet traction motor for fuel cell vehicles[J]．Chinese Journal of Mechanical Engineering,2005,41(12)：69-75(in Chinese)．
[6]
黄苏融,钱慧杰,张琪,等．现代永磁电机技术研究与应用开发[J]．电机与控制应用,2007,34(1)：1-6． Huang Surong,Qian Huijie,Zhang Qi,et al．Study on modern PM motor technology and development in its applications[J]．Electric Machines & Control Application,2007,34(1)：1-6(in Chinese)．
[7]
Nerg J,Rilla M,Pyrhonen J．Thermal analysis of radial-flux electrical machines with a high power density[J]．IEEE Transactions on Industry Electronics,2008,(10)：3543-3554．
[8]
黄平林,胡虔生,崔杨,等．PWM逆变器供电下电机铁心损耗的解析计算[J]．中国电机工程学报,2007,27(12)：19-23． Huang Pinglin,Hu Qiansheng,Cui Yang,et al．Analytical calculation of the iron losses of electric machine fed by PWM inverter[J]．Proceedings of the CSEE,2007,27(12)：19-23(in Chinese)．
[9]
Fouladgar J,Chauveau E．The influence of the harmonics on the temperature of electrical machines[J]．IEEE Transactions on Magnetics,2005,41(5)：1644-1647．
[10]
李虎,Akihiro Hoshino．基于混合方法的PWM逆变器下永磁同步电动机的温升研究[J]．电机与控制应用,2009,36(4)：1-5． Li Hu,Akihiro Hoshino．Temperature analysis considering carrier harmonics of PMSM by a hybrid method[J]．Electric Machines & Control Application,2009,36(4)：1-5(in Chinese)．
[11]
孔晓光,王凤翔,邢军强．高速永磁电机的损耗计算与温度场分析[J]．电工技术学报,2012,27(9)：165-172． Kong Xiaoguang,Wang Fengxiang,Xing Junqiang．Losses calculation and temperature field analysis of high speed permanent magnet machines[J]．Transactions of China Electrotechnical Society,2012,27(9)：165-172(in Chinese)．
[12]
吴新振,王祥珩,罗成．异步电机转子感应非正弦电流时的导条损耗[J]．中国电机工程学报,2005,25(17)：131-135． Wu Xinzhen,Wang Xiangheng,Luo Cheng．Loss calculation for induction machine rotor bar with non-sinusoidal current[J]．Proceedings of the CSEE,2005,25(17)：131-135(in Chinese)．
[13]
Xyperas J,Hatziathanassiou V．Thermal analysis of an electrical machine taking into account the iron losses and the deep-bar effect[J]．IEEE Transactions on Energy Conversion,1999,14(4)：996-1003．
[14]
Staton D,Boglietti A,Cavagnino A．Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction model[J]．IEEE Transactions on Energy Conversion,2005,20(3)：620-628．
[15]
李伟力,李守法,谢颖,等．感应电动机定子转子全域温度场数值计算及相关因素敏感性分析[J]．中国电机工程学报,2007,27(24)：85-91． Li Weili,Li Shoufa,Xie Ying,et al．Stator-rotor coupled thermal field numerical calculation of induction motors and correlated factors sensitivity analysis[J]．Proceedings of the CSEE,2007,27(24)：85-91(in Chinese)．
[16]
Nategh S,Wallmark O,Leksell M,et al．Thermal analysis of a PMaSRM using partial FEA and lumped parameter modeling[J]．IEEE Transactions on Energy Conversion,2012,27(2)：477-488．
[17]
Zhang Yujiao,Ruan Jiangjun,Huang Tao．Calculation of temperature rise in air-cooled induction motors through 3-D coupled electromagnetic fluid-dynamical and thermal finite-element analysis[J]．IEEE Transactions on Magnetics,2012,48(2)：1047-1050．
[18]
周庆生,黄苏融,张琪．新型冷却结构超高精度平面电机定子温度场分析[J]．中国电机工程学报,2012,32(15)：134-139． Zhou Qingsheng,Huang Surong,Zhang Qi,et al．Temperature field analysis of novel cooling structure ultra-precision planar motor[J]．Proceedings of the CSEE,2012,32(15)：134-139(in Chinese)．
[19]
李伟力,靳慧勇,丁树业,等．大型同步发电机定子多元流场与表面散热系数数值计算与分析[J]．中国电机工程学报,2005,25(23)：138-143． Li Weili,Jin Huiyong,Ding Shuye,et al．Numerical calculation and analysis of large synchronous generator stator multidimensional fluid fields and surface heat transfer coefficients[J]．Proceedings of the CSEE,2005,25(23)：138-143(in Chinese)．
[20]
张靖周,常海萍．传热学[M]．北京：科学出版社,2009：28． Zhang Jingzhou,Chang Haiping．Heat transfer theory[M]．Beijing：Science Press,2009：28(in Chinese)．
