[1] Itasca Consulting Group Inc. PFC2D Particle Flow Code in 2 Dimensions: User's Guide. Minneapolis, Minnesota, 2008
[2]
[2] 徐泳, 孙其诚, 张凌等.颗粒离散元法研究进展.力学进展, 2003, 33(2): 251-260(Xu Yong, Sun Qicheng, Zhang Ling, et al. Advances in discrete element methods for particulate materials. Advances in Mechanics, 2003, 33(2): 251-260 (in Chinese))
[3]
[3] Karion A, Hunt ML. Wall stresses in granular Couette flows of mono-sized particles and binary mixtures. Powder Technology, 2000, 109: 145-163
[4]
[4] Matuttis HG, Luding S, Herrmann HJ. Discrete element simulations of dense packings and heaps made of spherical and non-spherical particles. Powder Technology, 2000, 109: 278-292
[5]
[5] Langston PA, Tuzun U, Heyes DM. Discrete simulations of granular flow in 2D and 3D hoppers: dependence of discharge rate and wall stress on particle interactions. Chem Engng Sci, 1995, 50: 967-987
[6]
[6] Kafui KD, Thornton C. Some observations of granular flow in hoppers and silos. In: Behringer RP, Jenkins TJ, eds. Powders & Grains 97. Rotterdam: Balkerna, 1997: 511-514
[7]
[7] Masson S, Martinez J. Effect of mechanical properties on silo flow and stress from distinct element simulations. Powder Technology, 2000, 109(1-3): 164-178
[8]
[8] Zhou YC, Wright BD, Yang RY, et al. Rolling friction in the dynamic simulation of sandpile formation. Physica A, 1999, 269(2-4): 536-553
[9]
[9] Zhou YC, Xu BH, Yu AB, et al. An experimental and numerical study of the angle og repose of coarse spheres. Powder Technology, 2002, 125(1): 45-54
[10]
[10] Rives C. Avalanches and self-organized criticality in simulation of particle piles. Chemical Physics Letters, 2003, 370(5-6): 700-705
[11]
[11] Robinson DA, Friedman SP. Observations of the effects of particle shape and particle size distribution on avalanching of granular media. Physica A, 2002, 311(1-2): 97-110
[12]
[12] Liffman K, Nguyen M, et al. Forces in piles of granular material: an analytic and 3D DEM study. Granular Matter, 2001, 3(3): 165-176
[13]
[13] 熊拾根.大型高炉采用无料钟技术几点问题的探讨.四川冶金, 2008, 30(3): 101-106 (Xiong Shigen. Discussions on the adoption of BLT on large-sized BF. Sichuan Metallurgy, 2008, 30(3): 101-106 (in Chinese))
[14]
[14] 胡波,缪克军. 高炉无钟炉顶料罐存在问题分析及改进.新疆钢 铁, 2004, 2: 25-26 (Hu Bo, Miao Kejun. Analysis and improvement of problems of charging bucket of BLT on BF. Xinjiang Steel, 2004, 2: 25-26 (in Chinese))
[15]
[15] Coetzee CJ, Els DNJ, Dymond GF. Discrete element parameter calibration and the modeling of dragline bucket filling. Journal of Terra-mechanics, 2010, 47: 33-44
[16]
[16] 王明年,魏龙海,刘大刚. 卵石地层中地下铁道施工力学的颗粒离散元法模拟技术及 应用. 成都: 西南交通大学出版社, 2010. 26-30%of Subway Construction Mechanics in Cobble Stratum. Chengdu: Press of
[17]
[17] 焦红光,李靖如,赵继芬等.关于离散元法计算参数的探讨.河南理工大学学报(自然科学 版), 2007, 26(1): 88-93(Jiao Hongguang, Li Jinru, Zhao Jifen, et al. Discussion on the calculation parameters of discrete element method. Journal of Henan Polytechnic University (Natural Science), 2007, 26(1): 88-93 (in Chinese))
[18]
[18] 许志宝.基于离散元法的大豆碰撞过程仿真分析. [硕士论文]. 长春: 吉林大学, 2006(Xu Zhibao. Simulation analysis of collision process of soybean based on the DEM. [Master Thesis]. Changchun: Jilin University, 2006 (in Chinese))
[19]
[19] 孙其诚,王光谦.颗粒物质力学导论.北京:科学出版社, 2009
[20]
[20] 陈日兴.自动衡器系统物料特性分析试验与准确度开放性.检验测试, 2010, 39(1): 24-29(Chen Rixing. Material characteristic and open accuracy of automatic weighing instruments. Examination Test, 2010, 39(1): 24-29 (in Chinese))
[21]
[21] Richarda P, Taberlet N. Recent advances in DEM simulations of grains in a rotating drum. Soft Matter, 2008, 4: 1345-1348
[22]
[22] Teufelsbauer H, Wang Y, Chiou MC, et al. Flow--obstacle interaction in rapid granular avalanches: DEM simulation and comparison with experiment. Granular Matter, 2009, 11: 209-220
