1 雷仕民. 长输管道整体下沟施工技术研究. 安装,2007,(12):32-34 (Lei Shimin. Construction technology research about the entire under in ditch for long distance pipeline. Instal-lation, 2007, 175(12): 32-34 (in Chinese))
[2]
2 李德刚,董瑞峰,王国栋. CSP 生产线开发矿浆输送管用X65 管线钢的生产实践. 上海金属,2010,(2):4-7 (Li Degang,Dong Ruifeng,Wang Guodong. Production practice of develop-ment X65 pipeline steel used in pulp conveying pipe with CSP production line. Shanghai Metals, 2010, (2): 4-7 (in Chinese))
[3]
3 董新. 埋地管道弹性敷设的计算与放线方法. 石油工程建设,1995,8 (4):24-27 (Dong xin.The calculation of the elastic laying of pipelines and its paying off on site. Petroleum Engineering Construction, 1995, 8(4): 24-27 (in Chinese))
[4]
4 童华. 长输管线大变形设计理论研究. [博士论文]. 成都:西南石油学院,2005 (Tong Hua.The design theory study of large deformation for Long distance pipeline. [PhD The-sis]. Cheng Du: Southwest Petroleum University, 2005 (in Chinese))
[5]
5 费宝根,张义光. 天然气长输管线施工技术. 安装,1999,(4):18-20 (Fei Baogen, Zhang Yiguang. The construction tech-nology of natural gas long-distance pipeline. Installation,1999, (4): 18-20 (in Chinese))
[6]
6 李鹤林,李宵,吉玲康等.油气管道基于应变的设计与抗大变形管线钢的开发与应用.焊管,2007,30(5):3-11 (Li Helin, Li Xiao, Ji Lingkang, et al. Strain-based design for pipeline and development of pipe steels with high deformation re-sistance. Welded pipe and tube, 2007, 30(5): 3-11 (in Chi-nese))
[7]
7 潘晓伟,王国宁,边道永. 利用管线自动下沟器辅助管线下沟. 油气田地面工程,2000,19(4):70-71 (Pan Xiaowei,Wang Guoning,Bian Daoyong. Assisting pipeline down to ditch by using pipeline automatic down to ditch device. Oil-Gasfield Surface Engineering, 2000, 19(4): 70-71 (in Chi-nese))
[8]
8 李守国. 大口径长输管道下沟技术研究. 石油天然气学报(江汉石油学院学报),2010,32(3):113-115 (Li Shouguo.Technology research of under in ditch for large diameter and long distance pipeline. Journal of Oil and Gas Technology(J.JPI), 2010, 32(3): 113-115 (in Chinese))
[9]
9 张亮,张庆征. 长输管线下沟器辅助整体下沟工艺研究. 石油天然气学报(江汉石油学院学报),2010,32(3):103-106 (Zhang Liang, Zhang Qinzheng. Process research about lowering auxiliary device using in overall under in ditch for long dis-tance pipeline. Journal of Oil and Gas Technology(J.JPI),2010, 32(3): 103-106 (in Chinese))
