9 Seah SKW, Lim CT, Wong EH, et al. Mechanical responseof pcbs in portable electronic products during drop impact.In: 4th Electronics Packaging Technology Conference, Sin-gapore, 2002. 120-125
[2]
10 Lim CT, Ang CW, Tan LB, et al. Drop impact surveyof portable electronic products. In: Proceedings of 53rdElectronic Components and Technology Conference, NewOrleans, L. A., 2003
[3]
11 Zhou CY, Yu TX, Lee RSW. Drop/impact tests and anal-ysis of typical portable electronic devices. InternationalJournal of Mechanical Sciences, 2008, 50(5): 905-917
[4]
12 Zhou CY, Yu TX, Suhir E. Design of shock table teststo mimic real-life drop conditions. IEEE Transactionson Components and Packaging Technologies, 2009, 32(4):832-837
[5]
13 Zhou CY, Yu TX. Analytical models for shock isolation oftypical components in portable electronics. InternationalJournal of Impact Engineering, 2009, 36(12): 1377-1384
[6]
14 Zhu LP. Submodeling technique for BGA reliability analy-sis of CSP packaging subjected to an impact loading. In:Proceedings of IPAC'01, The Pacific Rim/ASME interna-tional Electronic Packaging Technical Conference and Ex-hibition, July 8-13, 2001
[7]
15 Ong KC, Tan VBC, Lim CT, et al. Dynamic materials test-ing and modeling of solder interconnects. Proceedings of 54th Electronic Components and Technology Conference,Las Vegas, Nevada, June 1-4, 2004
[8]
16 Siviour CR,Walley SM, Proud PG, et al. Mechanical prop-erties of SnPb and lead-free solders at high rates of strain.Journal of Physics D: Applied Physics, 2005, 38(22): 4131
[9]
17 Williamson DM, Field JE, Palmer SJP, et al. Rate depen-dent strengths of some solder joints. Journal of Physics D:Applied Physics, 2007, 40(15): 4691
[10]
18 Song FB, Lee SWR. Investigation of imc thickness effect onthe lead-free solder ball attachment strength: Comparisonbetween ball shear test and cold bump pull test results. In:Proc. 56th Electronic Components and Technology Con-ference, San Diego, CA, June 2006
[11]
19 Song FB, Lee SWR, Newman K, et al. High-speed solderball shear and pull tests vs. board level mechanical droptests: Correlation of failure mode and loading speed. In:Proc. 57th Electronic Components and Technology Con-ference, ECTC '07, Reno, NV, May 29-June 1, 2007
[12]
20 Song FB, Lee SWR, Newman K, et al. Brittle failure mech-anism of snagcu and snpb solder balls during high speedball shear and cold ball pull tests. In: Proc. 57th Elec-tronic Components and Technology Conference, ECTC '07,Reno, NV, May 29-June 1, 2007
[13]
21 Ghaffarian R. Thermal cycle and vibration/drop reliabil-ity of area array package assemblies. In: Suhir E, Yu TX,Steinberg DS, eds. Structural Dynamics of Electronic andPhotonic Systems, 1st ed. Hoboken: Wiley, 2011
[14]
22 Allen AM, Bogy DB. Effects of shock on the head-diskinterface. IEEE Transactions on Magnetics, 1996, 32(5):3717-3719
[15]
23 Harrison JC, Mundt MD. Flying height response to me-chanical shock during operation of a magnetic hard diskdrive. Journal of Tribology-Transactions of ASME, 2000,122(1): 260-263
[16]
24 Shu DW, Shi BJ, Luo J. Shock simulation of drop test ofhard disk drives. In: Suhir E, Yu TX, Steinberg DS, Eds.Structural Dynamics of Electronic and Photonic Systems.1st ed. Hoboken: Wiley, 2011
[17]
25 Shi BJ, Wang S, Shu DW, et al. Excitation pulse shape ef-fects in drop test simulation of the actuator arm of a harddisk drive. Microsystem Technologies, 2006, 12(4): 299-305
[18]
26 Yoon SH, Park S. A mechanical analysis of woodpeckerdrumming and its application to shock-absorbing systems.Bioinspiration & Biomimetics, 2011, 6(1): 016003
[19]
27 Yoon S-H, Kim KL. Passive low pass filtering effect of me-chanical vibrations by a granular bed composed of micro-glass beads. Appl Phys Lett, 2006, 89(2): 021906
[20]
28 Yoon S-H, Roh J-E, Kim KL. Woodpecker-inspired shockisolation by microgranular bed. J Phys D: Appl Phys, 2008,42(3): 035501
[21]
1 周春燕,余同希,李世玮. 便携式电子产品的跌落冲击响应--试验, 仿真和理论. 力学进展, 2006,36 (2): 239-246 (ZhouChunyan, Yu Tongxi, Li Shiwei. Review on shock responseof portable electronic products under drop impact-tests,simulations and theories. Advances in Mechanics, 2006, 36(2): 239-246 (in Chinese))
[22]
2 Steinberg DS. Vibration Analysis for Electronic Equip-ment. 3rd ed. Hoboken: Wiley, 2000
[23]
3 Steinberg DS. Preventing Thermal Cycling And VibrationFailures in Electronic Equipment. Hoboken: Wiley, 2001
[24]
4 Suhir E. Applied Probability for Engineers and Scientists.New York: McGraw-Hill, 1997
[25]
5 Suhir E. Predicted fundamental vibration frequency of aheavy electronic component mounted on a printed cir-cuit board. ASME Journal of Electronic Packaging, 2000, 122(1): 3-5
[26]
6 Newton RE. Shock & Vibration Handbook. New York:McGraw-Hill, 1988
[27]
7 Newton RE. Fragility Assessment Theory And Test Proce-dure. Monterey: Monterey Research Laboratory, 1968
[28]
8 Lim CT, Low YJ. Investigating the drop impact of portableelectronic products. Proceedings of 52nd Electronic Com-ponents and Technology Conference, San Diego, CA, USA,28-31 May, 2002
