27 郑永学, 王泳嘉, 姚赞勋. 自然崩落法崩落机制的研究. 有色金属 (矿山部分), 1989, (2): 3-8 (Zheng Yongxue, Wang Yongjia, Yao Zanxun. Study on the caving mechanism of natural caving. Nonferrous Metals (Mining Section), 1989, (2): 3-8 (in Chinese))
[2]
28 王泳嘉, 邢纪波. 崩落采矿法放矿的计算机仿真. 见:全国非金属矿学术会议论文集(二), 1988. 22-26 (Wang Yongjia, Xing jibo. Computer simulation of caving method ore-drawing. In: The National Non-metallic Minerals Conference Pro- ceedings(b), 1988. 22-26 (in Chinese))
[3]
29 Wang Yongjia, Xing Jibo. Computerized simulation of ore drawing of caving system. In: Proe. 2nd Wold Congress on Non-Metallic Minerals, 1989
[4]
30 陈荣华. 自然崩落法底部结构稳定性研究. [硕士论文]. 沈阳: 东北工学院, 1989 (Chen Ronghua. The study on stability of bottom structure in natural caving method. [Master The- sis]. Shenyang: Northeast University of Technology, 1989 (in Chinese))
[5]
31 沈宝堂. 边坡稳定的离散元分析. [硕士论文]. 沈阳: 东北工学院, 1987 (Shen Baotang. Discrete element analysis of slope stability. [Master Thesis]. Shenyang: Northeast University of Technology, 1987 (in Chinese))
[6]
32 王泳嘉, 沈宝堂. 边坡稳定的离散元分析. 见:结构模型破坏试验研讨会论文集. 南京, 河海大学, 1988 (Wang Yongjia, Shen Baotang. Discrete element analysis of slope stability. Structural Model Destruction Test Symposium Proceeding. Nanjing, Houhai University, 1988 (in Chinese))
[7]
52 Ransing RS, Gethin DT, Khoei AR, et al. Powder compaction modeling via the discrete and finite element method. Materials and Design, 2000, 21: 26-269
[8]
53 Lorig LJ, Brady BHG. A hybrid discrete element-boundary element method of stress analysis. In: Proc. 23rd U.S. Symposium on Rock Mechanics, California, 1982. 628-636
[9]
54 Lemos JV. A hybrid distinct element computational model for the half-plane. [Master Thesis]. Minnesota: University of Minnesota, 1983
[10]
55 Lemos JV, Brady BHG. Stress distribution in a jointed and fractured medium. In: the 24th U.S. Symposium on Rock Mechanics, New York, 1983
[11]
56 Lorig LJ. A hybrid computational model for excavation and support design in jointed media. [PhD Thesis]. Minnesota: University of Minnesota, 1984
[12]
57 王泳嘉, 邢纪波. 离散元法及其与边界元法的耦合. 见:边界元法在岩石力学和工程中应用会议文集, 1987 (Wang Yongjia, Xing Jibo. The coupling of discrete element method and boundary element method. In: The Application of the Boundary Element Method in Rock Mechanics and Engi- neering Proceedings, 1987 (in Chinese))
[13]
58 周晓青, 王元汉, 哈秋舲. 离散单元法与边界单元法的外部耦合计算. 岩石力学与工程学报, 1996, 15: 231-235 (Zhou Xiao- qing, Wang Yuanhan, Ha Qiuling. External coupling com-putation between distinct element method and boundary element method. Chinese Journal of Rock Mechanics and Engineering, 1996, 15: 231-235 (in Chinese))
[14]
59 金峰, 贾伟伟, 王光纶. 离散元- 边界元动力耦合模型. 水利学报, 2001, (2): 24-28 (Jin Feng, Jia Weiwei, Wang Guan- glun. Coupling model of distinct element-boundary ele- ment. Journal of Hydraulic Engineering, 2001, (2): 24-28 (in Chinese))
[15]
60 Zubelewicz A, Bazant ZP. Interface element modeling of fracture in aggregate composites. Journal of Engineering Mechanics, 1987, 113(11): 1619-1630
[16]
23 王泳嘉, 刘兴国, 邢纪波. 离散元法在崩落法放矿中应用的研究. 有色金属, 1987, 39(2): 20-26 (Wang Yongjia, Liu Xingguo, Xing Jibo. Research on applications of discrete element method in ore drawing for caving system. Nonferrous Met- als, 1987, 39(2): 20-26 (in Chinese))
[17]
24 戴庆. 自然崩落法电耙底部结构稳定性研究. [博士论文]. 北京: 北京科技大学, 1987 (Dai Qing. The study on stability of electric rake bottom structure in natural caving method. [PhD Thesis]. Beijing: University of Science and Technol- ogy Beijing, 1987 (in Chinese))
[18]
25 邢纪波, 王泳嘉. 崩落采矿法放矿的离散元仿真. 东北工学院学报, 1988, (2): 148-153 (Xing Jibo, Wang Yongjia. Dis- crete element simulation of ore drawing by caving method in mining. Journal of Northeast University of Technology,1988, (2): 148-153 (in Chinese))
[19]
26 赖森华. 有底部结构崩落采矿法放矿动力学问题的研究. [博士论文]. 北京: 北京科技大学, 1988 (Lai Senhua. The research on dynamics problems of caving method with bottom struc- ture. [PhD Thesis]. Beijing: University of Science and Technology Beijing, 1988 (in Chinses))
[20]
1 刘凯欣, 高凌天. 离散元法研究的评述. 力学进展, 2003,33(4):483-490 (Liu Kaixin, Gao Lingtian. A review on the discrete element method. Advances in Mechanics, 2003,33(4): 483-490 (in Chinese))
[21]
2 Cundall PA. A computer model for simulating progressive large scale movements in blocky systems. In: Proceedings of the Symposium of the International Society of Rock Me- chanics, Nancy, France, 1971
[22]
3 Cundall PA. The measurement and analysis of acceleration in rock slopes. [PhD Thesis]. London: University of Lon- don, 1971
[23]
4 Cundall PA. Rational design of tunnel supports: A com- puter model for rock mass behavior using interactive graph- ics for the input and output of geometrical data. Tech Re- port MRD-2-74, Missouri River Division, US Army Corps of Engineers, 1974
[24]
5 Cundall PA, Marti J, Beresford PJ, et al. Computer mod- eling of jointed rock masses. Tech Report N-78-4, US Army Engineer Waterways Experiment Station, Vicksburg, Mis- sissippi, 1978
[25]
6 Cundall PA, BALL-A program to model granular me- dia using the distinct element method. London: Dames & Moore Advanced Technology Group, 1978
[26]
7 Strack ODL, Cundall PA. The Distinct Element Method as a Tool for Research in Granular Media, Part Ⅰ. Minnesota: University of Minnesota, 1978
[27]
8 Drescher A. Photoelastic verification of a mechanical modol for the flow of a granular material. J Mech Physics Solids,1972, 20: 337-351
[28]
9 Cundall PA. UDEC-A generalized distinct element pro- gram for modeling jointed rock. Report PCAR-1-80, Peter Cundall Associates, European Research Office, US Army,1980
[29]
10 Cundall PA, Hart RD. Development of generalized 2-D and3-D distinct element programs for modeling jointed rock. ITASCA Consulting Group, Misc Paper SL-85-1, US Army Corps of Engineers, 1985
[30]
11 UDEC News and World Report, Official Publication of the UDEC Users Group, ITASCA Consulting Group, Inc., 1985
[31]
12 3DEC-3-D Distinct Element Code, ITASCA Consulting Group, 1987
[32]
13 Cundall PA. Formulation of a three-dimensional distinct element model-part Ⅰ. A scheme to detect and represent contacts in a system composed of many polyhedral blocks. Int J Rock Mech Min Sci & Geomch Abstr, 1988, 25(3):107-116
[33]
14 Lorig LJ. A hybrid computational model for excavation and support desing in jointed media. [PhD Thesis]. Minnesota: University of Minnesota, 1984
[34]
15 Hart R, Cundall PA, Lemos J. Formultaion of a three- dimensional distinct element model-parte II. Mechanical calculations for motion and interaction of a system com- posed of many polyhedral blocks. Int J Rock Mech Min Sci & Geomech Abstr, 1988, 25(3): 117-125
[35]
16 Shen B, Stephansson O. Cyclic loading characteristics of joints and rock bridges in a jointed rock specimen. In: Proe of Int Conference on Rock Joints, Leon Norway, 1990
[36]
17 Stephansson O, Shen B, Lemos J. Modeling of excavation, thermal loading and bentonite swelling pressure for a waste repository. In: Int High-level Radioactive Waste Manage- ment Conference, Las Vegas, Nevada, USA, 1991
[37]
18 Stephansson O, Shen B. Modeling of rock masses for site lo- cation of a nuclear waste repository. In: 7th Int. Congress of Int. Society for Rock Mechanics, Aachen, Germany, 1991
[38]
19 王泳嘉. 离散单元法——一种适用于节理岩石力学分析的数值方法. 见: 第一届全国岩石力学数值计算及模型试验讨论会论文集, 1986. 32-37 (Wang Yongjia. Discrete element method- -a numerical method suitable for analysis in jointed rocks. In: First National Rock Mechanics Numerical Calculations and Model Tests Seminar Proceedings, 1986. 32-37 (in Chi- nese))
[39]
20 侴万禧. 离散单元法的基本原理及其在岩体工程中的应用. 见: 第一届全国岩石力学数值计算及模型试验讨论会论文集, 1986.43-46 (Chou Wanxi. Principle of the discrete element method and its application in rock mechanics and engineer- ing. In: First National Rock Mechanics Numerical Calcu- lations and Model Tests Seminar Proceedings. 1986. 43-46 (in Chinese))
[40]
21 张清. 岩石力学基础. 北京: 中国铁道出版社, 1986 (Zhang Qing. Fundamentals of Rock Mechanics. Beijing: China Railway Publishing House. 1986 (in Chinese))
[41]
22 王泳嘉, 邢纪波. 放矿研究的一种新方法——离散单元法. 见:第二次全国采矿学术会议论文集(金属分册), 1986. 88-94 (Wang Yongjia, Xing Jibo. A new method of ore research ——discrete element method. In: Second National Mining Conference Proceedings (Metallic Volume), 1986. 88-94 (in Chinese))
[42]
33 沈宝堂, 王泳嘉. 边坡破坏机制的离散元法研究. 东北工学院学报, 1989, (4): 340-354 (Shen Baotang, Wang Yongjia. Dis- crete element method for slope failure mechanism. Journal of Northeast University of Technology, 1989, (4): 340-354 (in Chinese))
[43]
34 常来山. 广东云浮硫铁矿边坡破坏机理的离散元法分析. [硕士论文]. 马鞍山: 冶金工业部马鞍山矿山研究院, 1988 (Chang Laishan. The analysis of discrete element method on fail- ure mechanism of guangdong yunfu pyrite slope. [Master Thesis]. Ma Anshan: Ministry of Metallurgical Industry Maanshan Mining Research Institute (in Chinese))
[44]
35 笪盍, 邢纪波. 盘石镍矿边坡稳定的离散单元法分析. 岩石力学与工程学报, 1987, 6(4): 337-346 (Da He, Xing Jibo. Analysing panshi nickle mine slope stability by distinct el- ement method. Chinese Journal of Rock Mechanics and Engineering, 1987, 6(4): 337-346 (in Chinese))
[45]
36 姚建国. 开采影响下岩层移动变形的块体单元数值模拟. 见: 第一届全国计算岩土力学研讨会论文集(一), 峨眉, 1987 (Yao Jianguo. The numerical simulation of block element on strata movement and deformation in caving influence. First National calculation Rock and Soil Mechanics Symposium (a), E'mei, 1987 (in Chinese))
[46]
37 Liu KX, Gao LT, Tanimura S. Application of discrete el- ement method in impact problems. JSME Int J Ser A,2004, 47: 138-145
[47]
38 Liu KX, Gao LT. The application of discrete element method in solving three dimensional impact dynamics problems. Acta Mech Sol, 2003, 16: 256-261
[48]
39 Liu KX, Liu WF. Application of discrete element method for continuum dynamic problems. Arch Appl Mech, 2006,76: 229-243
[49]
40 Cheng M, Liu WF, Liu KX. New discrete element mod- els for elastoplastic problems. Acta Mech Sin, 2009, 25:629-637
[50]
41 Shan L, Cheng M, Liu KX, et al. New discrete element models for three-dimensional impact problems. Chin Phys Lett, 2009, 26(12): 120202
[51]
42 Shan L, Cui N, Liu KX, et al. A new combined scheme of discrete element method and meshless method for numeri- cal simulation of impact problems. Computer Modeling in Engineering & Science, 2012, 83(4): 353-383
[52]
43 Dowding CH, Gilbert C. Dynamic stability of rock slopes and high frequency traveling waves. Journal of Geotechni- cal Engineering, 1988, 114(10): 1069-1088
[53]
44 Dowding CH, Belytschko TB, Yen HJ. A coupled finite element-rigid block method for transient analysis of rock caverns. Int J Num Analy Methods Geomech, 1983, 7: 117-127
[54]
45 Pan XD, Reed MB. A coupled distinct element finite ele- ment method for large deformation analysis of rock masses. International Journal of Rock Mechanics and Mining Sci- ence & Geomechanics Abstract, 1991, 28(1): 93-99
[55]
46 胥建龙, 唐志平. 离散元与有限元结合的多尺度方法及其应用. 计算物理学报, 2003, 20(6): 476-482 (Xu Jianlong, Tang Zhiping. Combined discrete/finite element multiscale nu- merical method and its application. Chinese Journal of Computational Physics, 2003, 20(6): 476-482 (in Chinese))
[56]
47 邢纪波. 梁-- 颗粒模型导论. 北京:地震出版社, 1999 (Xing Jibo, Introduction of the Beam-Particle Model. Beijing: Seismological Press, 1999 (in Chinese))
[57]
48 张德海, 朱浮声, 邢纪波等. 岩石类非均质脆性材料破坏过程的数值模拟. 岩石力学与工程学报. 2005, 24(4): 570-574 (Zhang Dehai, Zhu Fusheng, Xing Jibo, et al. Numerical simulation of fracture propagation of anisotropic rock-like materials. Chinese Journal of Rock Mechanics and Engi- neering, 2005, 24(4): 570-574 (in Chinese))
[58]
49 Kun F, Herrmann HJ. Fragmentation of colliding discs. Int J of Mod Phys C, 1996, 7(6): 837-855
[59]
50 Muhlhaus HB, Sakaguchi H, Wei Y. Particle based model- ing of dynamic fracture in jointed rock. In: Yuan J X ed., Proc. 9th Int. Conf. on Numerical Methods in Geome- chanics, Balkema, Rotterdam, 1997
[60]
51 Mohammadi S, Owen DRJ, Peric D. A combined fi- nite/discrete element algorithm for delamination analysis of composites. Finite Elements in Analysis and Design,1998, 28: 321-336
