59 Chen DCK, Smith M, LaPierre S. Integrated drilling dynamics system closes the model measure optimize loop in real time. Society of Petroleum Engineers, Amsterdam, Netherlands, 2003
[2]
60 Dykstra MW, Chen DCK, Warren TM. Experimental evaluations of drill bit and drill string dynamics. Society of Petroleum Engineers, New Orleans, Louisiana, 1994
[3]
61 Lapierre SG, Seiler N, Chen DCK. Mitigating vibration in bi-center drilling programs. Society of Petroleum Engineers, Dallas, USA, 2004
[4]
62 Akinniranye G, Megat A, Elsweisy H, et al. Implementation of a shock and vibration mitigation process: achieving real-time solutions and savings. SPE Journal, 2009,24(2):1-10
[5]
63 Ashley DK, McNary XM, Tomlinson JC. Extending BHA life with multi-axis vibration measurements. Society of Petroleum Engineers, Amsterdam, Netherlands, 2001
[6]
64 Adam B, Lojini L, Junichi S, et al. Continuous highfrequency measurements of the drilling process provide new insights into drilling system response and transitions between vibration modes. Society of Petroleum Engineers, Amsterdam, Netherlands, 2014
[7]
65 Arevalo YI, Fernandes AJ. Quantification of drillstringintegrity-failure risk using real-time vibration measurements. Society of Petroleum Engineers, Jakarta, Indonesia,2012
[8]
66 高效曾. 用于地层倾角仪的加速度计和磁力计. 地球物理测井,1989, (6): 20-25
[9]
67 Omjuwa E, Osisanya S, Ahmed R. Measuring and controlling torsional vibrations and stick-slip in a viscousdamped drillstring model. International Petroleum Technology Conference, Bangkok, Thailand, 2012
[10]
68 Wu X, Karuppiah V, Nagaraj M, et al. Identifying the root cause of drilling vibration and stick-slip enables fitfor-purpose solutions. Society of Petroleum Engineers, Jakarta, Indonesia, 2012
[11]
69 Martin EC, Mark EW. Laboratory testing of an active drilling vibration monitoring & control system. National Technical Conference and Exhibition, Houston, Texas, 2005
73 Yezid IA, Yonnellybeth M, Andre N. Vibration risk index offers tool for preventing drillstring failure. World Trends and Technology for Offshore Oil and Gas Operations, 2011
[16]
74 杨福生. 随机信号分析. 北京: 清华大学出版社, 1990
[17]
75 张义民. 机械振动. 北京: 清华大学出版社, 2007
[18]
76 Cooley JW, Tukey JW. An algorithm for the machine calculation of complex Fourier series. Math Comput, 1965, (19): 297-301
[19]
77 Morlet J. Continuous wavelet transform and continuous multiscale analysis. Journal of Mathematical Analysis and Applications, 2003, 169(1): 179-196
81 Craig AD, Hanley C, McFarland B, et al. A proven approach to mitigating drilling vibration problems in offshore Western Australia. International Petroleum Technology Conference, Doha, Qatar, 2009
86 Romulo A, Dimitrios P. On the benefits of automation in improving the drilling e±ciency in offshore activities. Society of Petroleum Engineers, Amsterdam, Netherlands, 2014
53 Macpherson JD, Mason JS, Kingman JEE. Surface measurement and analysis of drillstring vibrations while drilling. Society of Petroleum Engineers, Amsterdam, Holland, 1993
[36]
54 Besaisow AA, Jan YM, Schuh FJ. Development of a surface drillstring vibration measurement system. Society of Petroleum Engineers, Las Vegas, USA, 1985
[37]
55 Dubinsky VSH, Henneuse HP, Kirkman MA. Surface monitoring of downhole vibrations: Russian, European, and American approaches. Society of Petroleum Engineers, Cannes, French, 1992
[38]
56 Ledgerwood LW, Hoffmann OJ, Jain JR, et al. Downhole vibration measurement, monitoring, and modeling reveal stick/slip as a primary cause of PDC-Bit damage in today. Society of Petroleum Engineers, Florence, Italy, 2010
[39]
57 MacPherson JD, Jogi PN, Kingman JEE. Application and analysis of simultaneous near bit and surface dynamics measurements. Society of Petroleum Engineers, Dallas, Texas, 1998
[40]
58 Zannoni SA, Cheatham CA, Chen CKD, et al. Development and field testing of a new downhole MWD drillstring dynamics sensor. Society of Petroleum Engineers, Houston, Texas, 1993
6 Rincon DM, Ulsoy AG. Complex geometry, rotary inertia and gyroscopic moment effects on drill vibrations. Journal of Sound and Vibration, 1995, 188(5): 701-715
[47]
7 Jason W. Does lithology cause/effect drilling shocks and vibrations and how their effects relate to tool failures. [PhD Thesis]. Oklahoma: University of Oklahoma, 2004
[48]
8 Jansen JD. Nonlinear Dynamics of Oilwell Drillstrings. Delft: Delft University Press, 1993. 73-76
[49]
9 Ali H, Nayfeh, Balakumar B. Applied Nonlinear Dynamics: Analytical, Computational, and Experimental Methods. Weinheim: Wiley-VCH, 1995
[50]
10 Ertas D, Bailey JR, Wang L, et al. Drill string mechanics model for surveillance, root cause analysis, and mitigation of torsional and axial vibrations. Society of Petroleum Engineers, Louisiana, USA, 2013
[51]
11 Jansen JD. Nonlinear rotor dynamics as applied to oilwell drillstring vibrations. Journal of Sound and Vibration,1991, 147 (1): 115-135
[52]
12 Navarro-Lopez EM, Cortes D. Avoiding harmful oscillations in a drillstring through dynamical analysis. Journal of Sound and Vibration, 2007, 307: 152-171
[53]
13 Millheim K, Jordan S, Ritter CJ. Bottom-hole assembly analysis using the finite-element method. SPE Journal,1978, 30(2): 265-274
[54]
14 Costa FS, Rebeiro PR. Finite element modeling of the mechanical behavior of unbalanced drillcollars, Society of Petroleum Engineers, Rio de Janeiro, Brazil, 1997
[55]
15 Apostal MC, Haduch GA, Williams JB. A study to determine the effect of damping on finite-element-based, forcedfrequency-response models for bottomhole assembly vibration analysis. Society of Petroleum Engineers, New Orleans, LA, 1990
[56]
16 Sampaio R, Piovan MT, Venero Lozano G. Non-linear model for coupled axial/torsional vibrations of drill-strings. COBEM, Rio de Janeiro, Brazil, 2005
18 Zhu XH, Tang LP, Yang QM. A literature review of approaches for stick-slip vibration suppression in oilwell drillstring. Advances in Mechanical Engineering, 2014, 2014:967952
[59]
19 Yigit AS, Christoforou AP. Coupled axial and transverse vibrations of oil well drill string. Journal of Sound and Vibration, 1996, 195 (4): 617-627
[60]
20 Yigit AS, Christoforou AP. Coupled torsional and bending vibrations of drillstrings subject to impact with friction. Journal of Sound and Vibration, 1998, 215 (1): 167-181
[61]
21 Richard T, Germay C, Detournay E. Self-excited stick-slip oscillations of drill bits. Comptes Rendus Mecanique, 2004,332: 619-626
[62]
22 Khulief YA, Mohiuddin MA. On the dynamic analysis of rotors using modal reduction. Finite Elements in Analysis and Design, 1997, 26(1): 41-55
[63]
23 Khulief YA, Al-Naser H. Finite element dynamic analysis of drillstrings. Finite Elements in Analysis and Design,2005, 41(13): 1270-1288
[64]
24 Yevhen K. A simple model of bit whirl for deep drilling applications. Journal of Sound and Vibration, 2013, 332(24):6321-6334
26 Kyllingstadand A, Halsey GW. Study of slip/stick motion of the bit. SPE Drilling Engineering, 1988, 3(4): 369-373
[67]
27 Liu X, Vlajic N, Long X, et al. Nonlinear motions of a flexible rotor with a drill bit: stick-slip and delay effects. Nonlinear Dynamics, 2013, 72(1): 61-77
[68]
28 Mihajlovi N, van de Wouw N, Rosielle PCJN, et al. Interaction between torsional and lateral vibrations in flexible rotor systems with discontinuous friction. Nonlinear Dynamics, 2007, 50(3): 679-699
[69]
29 Luc P, Emmanuel D, Geoff D. Bit/rock interface laws in directional drilling. International Journal of Rock Mechanics & Mining Sciences, 2012, 52: 81-90
[70]
30 Mitchell RF. Force on curved tubulars caused by fluid flow. Society of Petroleum Engineers, Adelaide, Australia, 1996
[71]
31 Eronini IG, Somerton WH, Auslander DM. A dynamic model for rotary rock Drilling. J Energy Resources Technol, 1982, 6: 108-120
[72]
32 Ledgerwood LW, Jain JR, Hoffmann OJ, et al. Down hole measurement and monitoring lead to an enhanced understanding of drilling vibrations and polycrystalline diamond compact bit damage. Society of Petroleum Engineers, Louisiana, USA, 2013
[73]
33 Raap C, Craig AD, Graham RB. Drill pipe dynamic measurements provide valuable insight into drill string dysfunctions. Society of Petroleum Engineers, Ohio, USA, 2011
[74]
34 Oueslati H, Jain JR, Reckmann H, et al. New insights into drilling dynamics through highfrequency vibration measurement and modeling. Society of Petroleum Engineers, Louisiana, USA, 2013
[75]
35 Chien ML, Nicholas V, Hamad K, et al. Parametric studies on drill-string motions. International Journal of Mechanical Sciences, 2012, 54(1): 260-268
[76]
36 Besaisow AA, Payne ML. A study of excitation mechanisms and resonances inducing BHA vibrations. Society of Petroleum Engineers, New Orleans, LA, 1986
[77]
37 Schen AE, Snell AD, Stanes BH. Optimization of bit drilling performance using a new small vibration logging tool. Society of Petroleum Engineers, Amsterdam, Netherlands, 2005
[78]
38 Field DJ, Swarbrick AJ, Haduch GA. Techniques for successful application of dynamic analysis in the prevention of field-induced vibration damage in MWD tools. Society of Petroleum Engineers, Amsterdam, Holland, 1993
[79]
39 Wolf SF, Zacksenhouse M, Arian A. Field measurements of downhole drillstring vibrations. Society of Petroleum Engineers, Las Vegas, USA, 1985
[80]
40 Lutz J, Raynaud H, Gstalder S, et al. Dynamics therory of drilling and instantaneous logging. Society of Petroleum Engineers, Los Angeles, California, 1971
[81]
41 Stephen WL, Mitch W, Aaron E, et al. Stick-slip detection and friction factor testing using surface-based torque and tension measurements. Society of Petroleum Engineers, Netherlands, 2014
