全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

沉管隧道接头非线性力学性能模拟方法

DOI: 10.6052/1000-0879-14-033, PP. 757-763

Keywords: 沉管隧道接头,非线性,精细化仿真,拟静力

Full-Text   Cite this paper   Add to My Lib

Abstract:

沉管隧道柔性接头的力学性能是其抗震设计的关键准则.用有限元方法模拟接头的非线性力学性能需要解决接头处材料非线性和接触非线性两个问题.为简化分析计算,该文采用分段线性化的方法表征接头的材料非线性问题,引进调整因子改进接触算法中的判断条件,处理接头的边界非线性问题.通过沉管隧道接头的三维精细化建模,研究了沉管隧道接头在拟静力载荷下的响应,获得了接头的轴向等效刚度曲线、抗弯刚度曲线和非线性耦合的剪切特性曲线,进而分析了不同轴向压力对接头剪切特性的影响.

References

[1]  1 禹海涛, 袁勇, 徐国平等. 超长沉管隧道抗震设计及其关键性问 题分析. 上海交通大学学报, 2012, 46(1): 94-98
[2]  2 U.S. Department of Transportation. Technical manual for design and construction of road tunnels civil elements. Fed-eral Highway Administration, USA, 2009
[3]  3 Ding JH, Jin XL, Guo YZ. Numerical simulation for large-scale seismic response analysis of immersed tunnel. Engi-neering Structures, 2006, 28: 1367-1377
[4]  4 Anastasopoulos I, Gerolymos N, Drosos V. Nonlinear re-sponse of deep immersed tunnel to strong seismic shaking. Journal of Geotechnical and Geoenvironmental Engineer-ing, 2007, 133(9): 1067-1090
[5]  5 Van Oorsouw RS. Behaviour of segment joints in immersed tunnels under seismic loading. [Master Thesis]. Nether-land: TU Delft, 2010
[6]  6 谢立广, 周晓军, 杨群. 水中悬浮隧道管段接头的力学特性分析. 现代隧道技术, 2001, 45(4): 32-38
[7]  7 黄帆. 沉管隧道GINA 橡胶止水带数值模拟分析. 结构工程师,2010, 26(1): 96-102
[8]  8 姜杰. 沉管接头钢剪切键的试验与设计. 现代隧道技术, 2001,38(4): 40-43
[9]  9 杨晓翔. 非线性橡胶材料的有限单元法. 北京: 石油工业出版 社, 1994
[10]  10 Mooney M. A theory of large elastic deformation. Journal of Applied Physics, 1940, 11: 582-592
[11]  11 Lyngs JH. Model accuracy in aseismic design of immersed tunnel. [Master Thesis]. Denmark: Aalborg University,2008
[12]  12 中国公路交通规划设计研究院有限公司. 内部设计资料, 2012
[13]  13 庄茁, 张帆, 岑松等. ABAQUS 非线性有限元分析与实例. 北 京: 科学出版社, 2005
[14]  14 ABAQUS V.6.10 User's Manual. ABAQUS Inc, 2010
[15]  15 朱伯芳. 有限单元法原理与应用. 北京: 中国水利水电出版社,2009

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133