63 张有宏, 吕国志, 陈跃良等. 铝合金腐蚀损伤的形态学研究. 腐 蚀科学与防护技术, 2007, 19(4): 272-274 (Zhang Youhong, Lffu Guozhi, Cheng Yueliang, et al. Morphological study on corrosion damage of aluminum alloy. Corrosion Science and Protection Technology, 2007, 19(4): 272-274 (in Chinese))
[2]
64 张玮, 梁成浩. 金属材料表面腐蚀形貌分形特征提取. 大连理工 大学学报, 2003, 43(1): 61-64 (Zhang Wei, Liang Chenghao. Extracting fractal characteristics from corrosion surface of metallic materials. Journal of Dalian University of Technology, 2003, 43(1): 61-64 (in Chinese))
[3]
65 卞贵学, 陈跃良, 俞品仕等. 基于分形理论的铝合金腐蚀损伤 研究. 强度与环境, 2009, 36(1): 39-44 (Bian Guixue, Chen Yueliang, Yu Pinshi, et al. Research of corrosion damage of aluminum alloy based on the fractal theory. Structure & Environment Engineering, 2009, 36(1): 39-44 (in Chinese))
[4]
66 许述剑, 翁永基, 李相怡. 图像分维对腐蚀坑分布特征的表征. 中国腐蚀与防护学报, 2007, 27(2): 109-113 (Xu Shujian, Weng Yongji, Li Xiangyi. Characterization for corrosion pitting distribution by using fractal dimension of image. Journal of Chinese Society for Corrosion and Protection,2007, 27(2): 109-113 (in Chinese))
[5]
67 翁永基, 许述剑, 边丽. 腐蚀和腐蚀模型研究中的分形方法. 中 国腐蚀与防护学报, 2006, 26(5): 315320 (Weng Yongji, Xu Shujian, Bian Li. Fractal methods in study corrosion and corrosion model. Journal of Chinese Society for Corrosion and Protection, 2006, 26(5): 315-320 (in Chinese))
[6]
68 穆志韬, 王国才, 朱做涛. 基于图像处理技术的铝合金腐蚀分形 特征. 海军航空工程学院学报, 2011, 26(1): 33-35 (Mu Zhitao, Wang Guocai, Zhu Zuotao. Corrosion fractal character of aluminum alloy based on image processing technique. Journal of Naval Aeronautical and Astronautical University, 2011, 26(1): 33-35 (in Chinese))
[7]
69 张川. 腐蚀损伤金属材料剩余寿命与剩余强度研究. [博士论文]. 南京: 南京航空航天大学, 2013 (Zhang Chuan. Research on residual life and residual strength of metallic materials with corrosion damage. [PhD Thesis]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2013 (in Chinese))
[8]
70 刘文珽, 杨洪源, 贺小帆. 腐蚀条件下民机结构疲劳寿命评定 方法研究. 北京航空航天大学学报, 2004, 30(8): 753-756 (Liu Wenting, Yang Hongyuan, He Xiaofan. Evaluation of fatigue lives for civil aircraft structures under corrosive condition. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(8): 753-756 (in Chinese))
[9]
71 李玉海, 刘文珽. 腐蚀条件下飞机结构疲劳寿命评定技术研究. 飞机设计, 2002, (4): 1-10 (Li Yuhai, Liu Wenting. Study on assessing fatigue of aircraft structures under corrosion environment. Aircraft Design, 2002, (4): 1-10 (in Chinese))
[10]
72 贺小帆, 刘文珽, 杨洪源. 基于Weibull 分布的疲劳加速腐蚀 因子分析. 北京航空航天大学学报, 2007, 33(2): 154-158 (He Xiaofan, Liu Wenting, Yang Hongyuan. Acceleration corrosion factor analysis for fatigue critical components based on the Weibull distribution. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(2): 154-158 (in Chinese))
[11]
73 贺小帆, 刘文珽. 疲劳关键件加速腐蚀因子可靠性分析. 航空学 报, 2005, 26(3): 315-319 (He Xiaofan, Liu Wenting. Reliability analysis of accelerated corrosion factor for fatigue critical components. Acta Aeronautica Et Astronautica Sinica, 2005, 26(3): 315-319 (in Chinese))
[12]
74 贺小帆, 刘文珽, 向锦武. 基于C——flT 曲线的加速腐蚀因子分析. 机械强度, 2007, 28(6): 888-892 (He Xiaofan, Liu Wenting, Xiang Jinwu. Reliability analysis of acceleration corrosion factor for fatigue critical components based on the C——flT curve. Journal of Mechanical Strength, 2007, 28(6): 888-892 (in Chinese))
[13]
75 贺小帆, 刘文珽, 向锦武. 基于DFR 的疲劳加速腐蚀因子模型 与分析. 应用力学学报, 2008, 25(3): 445-449 (He Xiaofan, Liu Wenting, Xiang Jinwu. Acceleration corrosion factor for fatigue critical components based on the DFR: Modeling and analysis. Chinese Journal of Applied Mechanics,2008, 25(3): 445-449 (in Chinese))
[14]
76 贺小帆, 刘文珽, 杨洪源. 铝合金加速腐蚀因子模型与分析. 航 空材料学报, 2008, 28(3): 77-81 (He Xiaofan, Liu Wenting, Yang Hongyuan. Acceleration corrosion factor for aluminum alloys: Model and analysis. Journal of Aeronautic Materials, 2008, 28(3): 77-81 (in Chinese))
[15]
77 李玉海, 贺小帆, 陈群志等. 铝合金试件腐蚀深度分布特性及变 化规律研究. 北京航空航天大学学报, 2002, 28(1): 98-101 (Li Yuhai, He Xiaofan, Chen Qunzhi, et al. Investigation on distribution and variable rule for corrosion depth of aluminum alloy specimen. Journal of Beijing University of Aeronautics and Astronautics, 2002, 28(1): 98-101 (in Chinese))
[16]
78 贺小帆, 杨洪源, 刘文珽. 预腐蚀疲劳退化加速因子研究. 航 空动力学报, 2008, 23(7): 1328-1333 (He Xiaofan, Yang Hongyuan, Liu Wenting. Investigation of acceleration factor for pre-corrosion fatigue degradation: Model and analysis. Journal of Aerospace Power, 2008, 23(7): 1328-1333 (in Chinese))
[17]
79 赵海军, 金平, 柳文林等. 预腐蚀疲劳寿命影响系数模型研究. 腐蚀科学与防护技术, 2006, 18(4): 265-267 (Zhao Haijun, Jin Ping, Liu Wenlin, et al. Research on a model of the influence coefficient for pre-corrosion fatigue life. Corrosion Science and Protection Technology, 2006, 18(4): 265-267 (in Chinese))
[18]
80 赵学锋, 王富永, 赵海军. 预腐蚀疲劳寿命影响系数及S——flN 曲线 研究. 机械强度, 2008, 30(6): 977-981 (Zhao Xuefeng, Wang Fuyong, Zhao Haijun. Research on the influence coefficient and S——flN curve for the pre-corrosion fatigue life. Journal of Mechanical Strength, 2008, 30(6): 977-981 (in Chinese))
[19]
81 张蕾，陈群志，宋恩鹏等. 某型飞机典型疲劳关键件加速腐蚀条 件下CflT 曲线的测定. 机械强度, 2004, 26(z1): 55-57 (Zhang Lei, Chen Qunzhi, Song Enpeng, et al. C——flT curve of the critical part of aircraft structure under corrosion condition. Journal of Mechanical Strength, 2004, 26(z1): 55-57 (in Chinese))
[20]
82 刘文珽, 李玉海, 贾国荣. 腐蚀条件下飞机结构使用寿命的评定 与监控. 北京航空航天大学学报, 1996, 22(3): 259-263 (Liu Wenting, Li Yuhai, Jia Guorong. Evaluation and supervision of service life for aircraft structures under corrosive condition. Journal of Beijing University of Aeronautics and Astronautics, 1996, 22(3): 259-263 (in Chinese))
[21]
1 Budnick J. NAVAIR air vehicle corrosion challenges. In: Tri-Service Corrosion Conference, Las Vegas, 2003
[22]
2 杨晓华. 腐蚀累积损伤理论研究与飞机结构日历寿命分析. [博士 论文]. 南京: 南京航空航天大学, 2002 (Yang Xiaohua. Study on corrosion cumulative damage rules and the calendar life of aircraft structures. [PhD Thesis]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2002 (in Chinese))
[23]
3 DuQuesnay DL, Underhill PR, Britt HJ. Fatigue crack growth from corrosion damage in 7075-T6511 aluminum alloy under aircraft loading. International Journal of Fatigue, 2003, 25(5): 371-377
[24]
4 张有宏, 吕国志, 陈跃良. LY12 CZ 铝合金预腐蚀及疲劳损伤 研究. 航空学报, 2005, 26(6): 779-782 (Zhang Youhong, Lffu Guozhi, Chen Yueliang. Predicting fatigue life from precorroded LY12-CZ aluminium test. Acta Aeronautica Et A-stronautica Sinica, 2005, 26(6): 779-782 (in Chinese))
[25]
5 沈海军. 铝合金腐蚀疲劳机理与腐蚀疲劳寿命分析方法综述. 飞 机工程, 2006, (2): 32-35 (Shen Haijun. Corrosive fatigue mechanism and life analysis of aluminum alloy. Aircraft Engineering, 2006, (2): 32-35 (in Chinese))
[26]
6 Hoeppner DW, Chandrasekaran V, Taylor AMH. Review of pitting corrosion fatigue models. In: Structural Integrity for the Next Millennium: Proceedings of the 20th Symposium of the International Committee on Aeronautical Fatigue, Dayton, 1999
[27]
7 Hoeppner DW, Mann W. Fracture mechanics based modeling of corrosion fatigue process. In: Corrosion Fatigue: Proceedings of the 52nd meeting of the AGARD Structural and Materials Panel, Turkey, 1981
[28]
8 Hoeppner DW. Model for prediction of fatigue lives based upon a pitting corrosion fatigue process. STP359175, 1979
[29]
9 Kimberli J, Hoeppner DW. Pit-to-crack transition in precorroded 7075-T6 aluminum alloy under cyclic loading. Corrosion Science, 2005, 47(9): 2185-2198
[30]
10 Muller M. Theoretical considerations on corrosion fatigue crack initiation. Metallurgical and Materials Transactions,1982, 13(4): 649-655
[31]
11 Goto M, Nisitani H. Crack initiation and propagation behavior of a heat treated carbon steel in corrosion fatigue. Fatigue Fracture Engineering Material Structure, 1992,4(15): 353-363
13 Kondo Y. Prediction of fatigue crack initiation life based on pit growth. Corrosion Science, 1989, 45(1): 7-11
[34]
14 Pao PS, Feng CR, Gill SJ. Corrosion-fatigue crack initiation in 7000-series Al alloys. In: The Proceedings of Second Joint NASA/FAA/DoD Conference on Aging Aircraft. Langley, 1999
[35]
15 Pao PS, Gill SJ, Feng CR. On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy. Scripta Materialia, 2000, 43(5): 391-396
[36]
16 Sankaran KK, Perez R, Jata KV. Effects of pitting corrosion on the fatigue behavior of aluminum alloy 7075-T6: Modeling and experimental studies. Materials Science and Engineering, 2001, 297(1-2): 223-229
[37]
17 Cole GK, Clark G, Sharp PK. The implications of corrosion with respect to aircraft structural integrity. DSTORR-0102, 1997
[38]
18 Shekhter A, Loader C, Hu W, et al. Assessment of the effect of pitting corrosion on the safe life prediction of the P-3C. DSTO-TR-2080, 2007
[39]
19 Mills T, Sharp PK, Loader C. The incorporation of pitting corrosion damage into F-111 fatigue life modeling. DSTORR-0237, 2002
[40]
20 Pitt S, Jones R. Multiple-site and widespread fatigue damage in aging aircraft. Engineering Failure Analysis, 1997,4(4): 237-257
[41]
21 Shell E. Prediction of residual fatigue life from NDE of corroded components. [PhD Thesis]. Dayton: University of Dayton, 2002
[42]
22 Scheuring JN, Grandt AF. Quantiˉcation of corrosion damage utilizing a fracture mechanics based methodology. In:The Proceedings of Third Joint FAA/DOD/NASA Conference on Aging Aircraft. Albuquerque, New Mexico, 1999
[43]
23 Zhao YP, Cheng CF, Wang GC, et al. Characterization of pitting corrosion in aluminum ˉlms by light scattering. Applied Physics Letters, 1998, 73(17): 2432-2434
[44]
24 Frantziskonis GN, Simon LB,Woo J, et al. Multiscale characterization of pitting corrosion and application to an aluminum alloy. European Journal of Mechanics-A/Solids,2000, 19(2): 309-318
[45]
25 Borge H, Otto L. Characterization of pitting corrosion by white light interferometry. Corrosion Science, 2007, 49(2):391-401
[46]
26 Birt EA, Jones LD, Nelson LJ, et al. NDE corrosion metrics for life prediction of aircraft structures. Insight, 2006,48(3): 139-143
[47]
27 韦丽金. 点蚀疲劳寿命估算的投影面积法. [硕士论文]. 南京: 南 京航空航天大学, 2008 (Wei Lijin. Projected area approach for pitting corrosion fatigue life prediction. [Master Thesis]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008 (in Chinese))
[48]
28 Walde K, Hillberry BM. Characterization of pitting damage and prediction of remaining fatigue life. International Journal of Fatigue, 2008, 30(1): 106-118
[49]
29 Silva JWJ, Bustamante AG, Codaro EN, et al. Morphological analysis of pits formed on Al 2024-T3 in chloride aqueous solution. Applied Surface Science, 2004, 236(1-4):356-365
[50]
30 Codaro EN, Nakazato RZ, Horovistiz AL, et al. An image processing method for morphology characterization and pitting corrosion evaluation. Materials Science and Engineering, 2002, 334(1-2): 298-306
[51]
31 Guillaumin C, Gueriau J. Quantitative measurement and shape characterization of pits with an image analyzer. In: Proceedings of the International Metallography Conference, Colmar, France, 1995
[52]
32 张玮. 金属腐蚀形貌特征提取用于腐蚀诊断的研究. [博士论文]. 大连: 大连理工大学, 2004 (Zhang Wei. Characteristics extraction of metallic corrosion morphology for corrosion diagnosis. [PhD Thesis]. Da Lian: Dalian University of Technology, 2004 (in Chinese))
[53]
33 许成龙, 吕胜利, 王振果等. 铝合金表面腐蚀形态演化规律的 分形几何表征. 机械科学与技术, 2011, 30(2): 233-236 (Xu Chenglong, Lffu Shengli, Wang Zhenguo, et al. Characteristics of the fractal geometry in the evolution rhythm of surface corrosion morphology of aluminum alloy. Mechanical Science and Technology for Aerospace Engineering, 2011, 30(2): 233-236 (in Chinese))
[54]
34 陈群志, 刘文珽, 齐贤德等. 预腐蚀后飞机结构疲劳S——flN 曲线 研究. 见: 疲劳与断裂:第十届全国疲劳与断裂学术会议论文集. 北京: 气象出版社, 2000 (Chen Qunzhi, Liu Wenting, Qi Xiande, et al. Study on fatigue S——flN curves of aircraft structures after corrosion. In: Fatigue & Fracture: The Proceedings of 10th National Fatigue and Fracture Academic Conference, Beijing: China Meteorological Press, 2000 (in Chinese))
[55]
35 贺小帆, 刘文珽, 王忠波等. 疲劳寿命预腐蚀影响系数曲线通 用性研究. 机械强度, 2004, 26(1): 101-104 (He Xiaofan, Liu Wenting, Wang Zhongbo, et al. Research on the generality of the pre-corrosion influence coefficient curve of fatigue. Journal of Mechanical Strength, 2004, 26(1): 101-104 (in Chinese))
[56]
36 ASTM G 46-94 Standard guide for examination and evaluation of pitting corrosion. West Conshohocken, PA, USA: ASTM, 1999
[57]
37 ISO 11463 Corrosion of metals and alloys evaluation of pitting corrosion. Geneve, Switzerland: ISO, 1995
[58]
38 王逾涯, 韩恩厚, 孙祚东等. LY12CZ 铝合金在EXCO 溶液 中的腐蚀行为研究. 装备环境工程, 2005, 2(1): 20-24 (Wang Yuya, Han Enhou, Sun Zuodong, et al. Studies of corrosion behavior of LY12CZ aluminum alloy in EXCO solution. Metal Forming Technology, 2005, 2(1): 20-24 (in Chinese))
[59]
39 黄桂桥, 郁春娟. 金属材料在海洋飞溅区的腐蚀. 材料保护,1999, 32(2): 31-33 (Huang Guiqiao, Yu Chunjuan. Corrosion of metal materials at sea water splashing zone. Materials Protection, 1999, 32(2): 31-33 (in Chinese))
[60]
40 谢伟杰, 李荻, 胡艳玲等. LY12CZ 和7075-T7351 铝合金在 EXCO 溶液中腐蚀动力学的统计研究. 航空学报, 1999, 20(1):35-39 (Xie Weijie, Li Di, Hu Yanling, et al. Statistical study of corrosion kinetics law for LY12CZ and 7075-T7351 aluminum alloy in EXCO solutions. Acta Aeronautica Et Astronautica Sinica, 1999, 20(1): 35-39 (in Chinese))
[61]
41 陈跃良, 吕国志, 段成美. 服役条件下飞机结构腐蚀损伤概率模 型研究. 航空学报, 2002, 23(3): 249-251 (Chen Yueliang, Lffu Guozhi, Duan Chengmei. A probability model for the corrosion damage of aircraft structure in service environment. Acta Aeronautica Et Astronautica Sinica, 2002, 23(3): 249-251 (in Chinese))
[62]
42 任克亮, 吕国志, 张有宏. 老龄结构分析中腐蚀坑与等效裂纹 间的量化关系. 强度与环境, 2006, 3(2): 50-57 (Ren Keliang, Lffu Guozhi, Zhang Youhong. The correlation between corrosion pit with equivalent initial surface crack. Structure & Environment Engineering, 2006, 3(2): 50-57 (in Chinese))
[63]
43 Xiang YB, Liu YM. EIFS-based crack growth fatigue life prediction of pitting-corroded test specimens. Engineering Fracture Mechanics, 2010, 77(8): 1314-1324
[64]
44 Xiang YB, Lu ZZ, Liu YM. Crack growth-based fatigue life prediction using an equivalent initial flaw model. Part I: Uniaxial loading. International Journal of Fatigue, 2010,32(2): 341-349
[65]
45 Dolley EJ, Lee B, Wei RP. The effect of pitting corrosion on fatigue life. Fatigue & Fracture of Engineering Material & Structures, 2000, 23(7): 555-560
[66]
46 Crawford BR, Loader C, Ward AR, et al. The EIFS distribution for anodised and pre-corroded 7010-T7651 under constant amplitude loading. Fatigue & Fracture of Engineering Material & Structures, 2005, 28(9): 795-808
[67]
47 Murakami Y. Analysis of stress intensity factors of mode I, II and III for inclined surface cracks of arbitrary shape. Engineering Fracture Mechanics, 1985, 22(1): 101-114
[68]
48 Murakami Y, Endo M. Effects of defects, inclusions and inhomogeneities on fatigue strength. International Journal of Fatigue, 1994, 16(3): 163-182
[69]
49 Murakami Y, Beretta S. Small defects and inhomogeneities in fatigue strength: Experiments, models and statistical implications. Extremes, 1999, 2(2): 123-147
[70]
50 Murakami Y. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Amsterdam: Elsevier, 2002
[71]
51 何卫平, 陈勃, 曹定国. 铝合金腐蚀损伤规律及蚀坑当量化技术 研究. 航空标准化与质量, 2011, (2): 10-13 (HeWeiping, Chen Bo, Cao Dingguo. Study on corrosion damage law and pit equivalent technology of aluminum alloy. Aeronautic Standardization & Quality, 2011, (2): 10-13 (in Chinese))
[72]
52 Sharp PK, Barter SA, Clark G. Localized life extension speciˉcation for the F/A-18 Y470 X19 pocket. DSTO-TN-0279, 2000
[73]
53 Doerfler MT, Grandt AF, Bucci RJ, et al. A fracture mechanics based approach for quantifying corrosion damage. Tri-Service Corrosion Conference, Orlando, Florida, 1994
[74]
54 Zamber JE. A probabilistic approach to predicting fatigue lives of corroded 2024-T3 aluminum. AIAA Journal, 1999,37(10): 1311-1317
[75]
55 Medved JJ, Breton M, Irving PE. Corrosion pit size distributions and fatigue lives——a study of the EIFS technique for fatigue design in the presence of corrosion. International Journal of Fatigue, 2004, 26(1): 71-80
[76]
56 Walde K, Brockenbroughb JR, Craigc BA, et al. Multiple fatigue crack growth in pre-corroded 2024-T3 aluminum. International Journal of Fatigue, 2005, 27(10-12): 1509-1518
[77]
57 Cerit M, Genel K, Eksi S. Numerical investigation on stress concentration of corrosion pit. Engineering Failure Analysis, 2009, 16(7): 2467-2472
[78]
58 谭晓明, 陈跃良, 段成美. 孔蚀对老旧飞机搭接件结构完整性的 影响. 机械强度, 2005, 27(6): 821-824 (Tan Xiaoming, Chen Yueliang, Duan Chengmei. Influence of pitting corrosion on the structural integrity of lap joints in aging aircraft. Journal of Mechanical Strength, 2005, 27(6): 821-824 (in Chinese))
[79]
59 Newman JC, Raju IS. An empirical stress-intensity factor equation for the surface crack. Engineering Fracture Mechanics, 1981, 15(1): 185-192
[80]
60 Codaro EN, Nakazato RZ, Horovistiz AL, et al. An image analysis study of pit formation on Ti-6Al-4V. Materials Science and Engineering, 2003, 341(1-2): 202-210
[81]
61 张有宏, 吕国志, 任克亮等. 不同环境下LY12-CZ 铝合金表 面腐蚀损伤演化规律研究. 航空学报, 2007, 28(1): 142-145 (Zhang Youhong, Lffu Guozhi, Ren Keliang, et al. The evolution rhythm of surface corrosion damage of LY12-CZ aluminum in varied environments. Acta Aeronautica Et Astronautica Sinica, 2007, 28(1): 142-145 (in Chinese))
[82]
62 张有宏, 常新龙, 张世英等. 铝合金结构腐蚀损伤性能评价指标. 试验技术与试验机, 2007, (4): 5-7 (Zhang Youhong, Chang Xinlong, Zhang Shiying, et al. Assessment metric study on corrosion damage character of aluminum alloy structure. Test Technology and Testing Machine, 2007, (4): 5-7 (in Chinese))
