1 Richard P, Cheyrezy M. Reactive powder concrete withhigh ductility and 200-800MPa compressive strength.ACI SP, 1994, 144: 507-518
[2]
7 Liu CT, Huang GS. Fire performance of highly flowablereactive powder concrete. Construction and Building Ma-terials, 2009, 23(5): 2072-2079
[3]
8 Majorana CE, Mazzuccoa VA, Khouryb GA, et al. Anapproach for modelling concrete spalling in finite strains.Math Comput Simulat, 2010, 80(8): 1694-1712
[4]
9 Chaboche JL. Development of continuum damage mechan-ics for elastic solids sustaining anisotropic and unilateraldamage. Int J Damage Mech, 1993, 2(4): 311-329
[5]
10 Han CG, Han MC, Heo YS. Improvement of residual com-pressive strength and spalling resistance of high-strengthRC columns subjected to fire. Construc Building Mater, 2009, 23(1): 107-116
14 Bazant ZP. Analysis of pore pressure, thermal stressesand fractures in rapidly heated concrete. InternationalWorkshop on Fire Performance of High-Strength Concrete, Gaithersburg, USA, 1997
[9]
15 Dougill JW. Modes of failure of concrete panels exposed tohigh temperatures. Mag Concr Res, 1972, 24(79): 71-76
[10]
16 Fu Y, Li L. Study on mechanism of thermal spalling inconcrete exposed to elevated temperatures. Materials andStructures, 2010, 44(1): 1-16
[11]
17 Smith P. Significance of Test and Properties of Con-crete and Concrete-Making Materials. West Conshohocke:ASTM International, 1978
[12]
18 Gary RC, Michael CM. Measurement and prediction ofpore pressure in cement mortar subjected to elevated tem-perature. ACI Mater J, 1998, 95(5): 525-536
[13]
19 Philips JR, de Vries DA. Moisture movement in Porous ma-terials under temperature gradients. Trans Am Geo PhysUnion, 1957, 38: 222-232
[14]
20 Luikov AV. Heat and Mass Transfer in Capillary Porousbodies. Oxford: Pergamon Press, 1966
[15]
21 Jen YL, Shun C. Solutions of Luikov equations of heat andmass transfer in capillary-porous bodies. Int J Heat MassTransfer, 1991, 34(7): 1747-1754
[16]
22 Bazant ZP, Thonguthai W. Pore pressure in heated con-crete walls: theoretical prediction. Magazine Concr Res, 1979, 31(107): 67
[17]
25 Ahmed GN, Hurst JP. Coupled heat and mass transportphenomena in siliceous aggregate concrete slabs subjectedto fire. Fire Mater, 1997, 21(4): 161
[18]
26 Heijden GH, Bijnen RM. Moisture transport in heated con-crete, as studied by NMR, and its consequences for firespalling. Cem Concr Res, 2007, 37(6): 894-901
[19]
27 Mounajed G, Obeid W. A new coupling F.E. model for thesimulation of thermal hydro-mechanical behavior of con-cretes at high temperatures. Materials and Structures, 2004, 37(7): 422-432
[20]
28 Tenchev RT, Li LY, Purkiss JA. Finite element analysis ofcoupled heat and moisture transfer in concrete subjectedto fire. Numerical Heat Transfer, 2001, 39(7): 685-710
[21]
29 Tenehev RT, Li LY, Khalafallah BH. Finite element anal-ysis of coupled heat and mass transfer in concrete when itis in fire. Mag Concr Res, 2001, 53(2): 117-125
34 Gary RC, Chung JH. Numeric simulation of near-surfacemoisture migration and stress development in concrete ex-posed to fire. Computers and Concrete, 2004, 1(1): 31-46
[27]
35 Ichikawa Y, England GL. Prediction of moisture migrationand pore pressure build up in concrete at high tempera-tures. Nuclear Engineering and Design, 2004, 228(1): 245-259
72 Fumie A, Kazunori H. Thermal spalling of high perfor-mance concrete during fire. Second InternationalWorkshopStructures in Fire, Christchurch, New Zealand, 2002
[30]
73 Mirza MS, Lie T. Fire endurance analysis of reinforcedcon-crete columns. Can J Civ Eng, 1989, 16(3): 290-299
4 Harmathy TZ. Effect of moisture on the fire endurance ofbuilding elements. ASTM Special Technical Publication, 1965, 385: 74-95
[37]
5 Hertz K. Heated induced explosion of dense concrete. In-stitute of Building Design Report No.166, Technical Uni-versity of Denmark, 1984
[38]
6 Ratvio J, Ultralujan BK. Preliminary study of ultrastrength concrete applications. VTT Tiedotteita, 2001, 2078: 3-45
[39]
13 Mugume RB, Takashi H. Effect of fibre type and geom-etry on maximum pore pressures in fibre-reinforced highstrength concrete at elevated temperatures. Cem ConcrRes, 2012, 42(2): 459-466
[40]
23 Bazant ZP, Chern JC. Finite element program for moistureand heat transfer in heated concrete. Nuclear Engineeringand Design, 1981, 68(1): 61-70
[41]
24 Ahmed GN, Hurst JP. Modeling the thermal behavior ofconcrete slabs subjected to the ASTM E119 standard firecondition. J Fire Protect Eng, 1995, 7(4): 125-132
[42]
36 Matthias Z, David L. How do polypropylene fibers improvethe spalling behavior of in-situ concrete? Cem Concr Res, 2006, 36(5): 929-942
[43]
37 Chung JH, Consolazio GR. Numerical modeling of trans-port phenomena in reinforced concrete exposed to elevatedtemperatures. Cem Concr Res, 2005, 35(3): 597-608
[44]
38 Noumowe AN, Clastres P. Thermal stresses and water va-por pressure of high performance concrete at high tem-perature. 4th International Symposium on Utilization ofHigh-Strength/High-Performance Concrete, Paris, France, 1996
43 Kalifa P. Spalling and pore pressure in HPC at high tem-peratures. Cem Concr Res, 2000, 30(12): 1915-1927
[50]
44 Kalifa P, Chene G. High-temperature behavior of HPC withpolypropylene fibers from spalling to microstructure. CemConcr Res, 2001, 31(10): 1487-1499
[51]
45 Mindeguia JC, Pimienta PA. Temperature, pore pres-sure and mass variation of concrete subjected to hightemperature|experimental and numerical discussion onspalling risk. Cem Concr Res, 2010, 40(3): 477-487
[52]
46 Phan LT. Pore pressure and explosive spalling in concrete.Materials and Structures, 2008, 41(10): 1623-1632
[53]
47 Chan YN, Peng GF, Anson M. Fire behavior of high perfor-mance concrete made with silica fume at various moisturecontents. ACI Materials Journal, 1999, 96(3): 405-411
[54]
48 Hertz KD. Limits of spalling of fire-exposed concrete. FireSafety Journal, 2003, 38(2): 103-116
65 Ulm FJ, Coussy O, Bazant ZP. The \chunnel" fire I: chemo-plastic softening in rapidly heated concrete. Journal ofEngineering Mechanics, 1999, 125(3): 272-282
[72]
66 Meguid SA, Hu GD. A new finite element for treatingplane thermo-mechanical heterogeneous solids. Interna-tional Journal for Numerical Methods in Engineering, 1999, 44(4): 567-585
[73]
67 Nechnech W, Meftah F, Reynouard JM. An elasto-plasticdamage model for plain concrete subjected to hightemper-atures. Engineering Structures, 2002, 24(5): 597-611
[74]
68 Luccioni BM, Fgureoa MI. Thermo-mechanic model forconcrete exposed to elevated temperatures. EngineeringStructures, 2003, 25(6): 729-742
82 Ortiz M. A constitutive theory for the inelastic behavior ofconcrete. Mech Mater, 1985, 4(1): 67-93
[84]
83 Tenchev RT, Purnell P. An application of a damage con-stitutive model to concrete at high temperature and pre-diction of spalling. Int J Solids Struct, 2005, 42(26): 6550-6565
[85]
84 Fu YF, Wong YL, Poon CS, et al. Experimental study ofmicro/macro crack development and stress-strain relationsof cement-based composite materials at elevated tempera-tures. Cem Concr Res, 2004, 34(5): 789-797
[86]
85 Fu YF, Wong YL, Tang CA, et al. Thermal induced stressand associated cracking in cement-based composite at ele-vated temperatures (Part Ⅰ): thermal cracking around sin-gle inclusion. Cem Concr Comp, 2004, 26(2): 99-111
