Ahmadi MA, Ebadi M, Hosseini SM. Prediction breakthrough time of water coning in the fractured reservoirs by implementing low parameter support vector machine approach. Fuel, 2014, 117(Part A): 579-589
[2]
Zendehboudi S, Elkamel A, Chatzis I, et al. Estimation of breakthrough time for water coning in fractured systems: Experimental study and connectionist modeling. American Institute of Chemical Engineers, 2014, 60(5):1905-1919
[3]
Amarfio EM, Igbokoyi AO. Breakthrough time correlations for coning in bottom water supported reservoirs. SPE Nigeria Annual International Conference and Exhibition, 5-7 August, 2013, Lagos, Nigeria. SPE 167511-MS
[4]
Bahadori A. A mathematical predictive tool for determining the time to water cone breakthrough in horizontal wells. Petroleum Science and Technology, 2013, 31(20): 2047-2055
[5]
Moradi B, Dastkhan Z, Roozbehani B. The design and preparation of a simulator for the water coning phenomenon applying in fractured reservoirs. Petroleum Science and Technology, 2012, 30(15): 1579-1590
[6]
Bahadori A, Nouri A. Prediction of critical oil rate for bottom water coning in anisotropic and homogeneous formations. Journal of Petroleum Science and Engineering, 2012, 82-83:125-129
[7]
熊小伟, 李云鹏, 张静蕾 等. 一种预测底水油藏水锥动态及见水时间的新方法. 断块油气田, 2014, 21(2):221-223 (Xiong Xiaowei, Li Yunpeng, Zhang Jinglei, et al. A new method to predict water coning performance and water breakthrough time in bottom water oil reservoir. Fault-Block Oil & Gas Field, 2014, 21(2): 221-223 (in Chinese))
[8]
胡志鹏, 胡望水, 阮洪江 等. 改进的低渗透带隔板底水油藏油井见水时间的预报式. 科学技术与工程, 2014, 14(3): 29-31 (Hu Zhipeng, Hu Wangshui, Ruan Hongjiang, et al. A modified water breakthrough time prediction formula for low-permeability bottom water reservoirs with barrier. Science Technology and Engineering, 2014, 14(3): 29-31 (in Chinese))
[9]
朱维耀, 黄小荷, 岳明. 底水气藏水平井间水时间研究. 科技导报, 2014, 32(8): 27-31 (Zhu Weiyao, Huang Xiaohe, Yue Ming. prediction of water breakthrough time of horizontal wells in gas reservoirs with bottom water. Science & Technology Review, 2014, 32(8): 27-31 (in Chinese))
[10]
陈朝晖, 邓勇, 许博 等. 缝洞型底水油藏井底水突破时间预测方法. 石油与天然气地质, 2012, 33(5):791-795. (Chen Zhaohui, Deng Yong, Xu Bo, et al. Bottom water breakthrough prediction in fractured-vuggy reservoirs with bottom water. Oil & Gas Geology, 2012, 33(5): 791-795 (in Chinese))
[11]
Huang SJ, Zeng BQ, Zhao FL, et al. Water breakthrough shape description of horizontal wells in bottom-water reservoir. Mathematical Problems in Engineering, 2014, Article ID 460896
[12]
章威, 李廷礼, 刘超 等. 底水油藏直井水锥形态的定量描述新方法.天然气与石油, 2014, 32(3): 34-37 (Zhang Wei, Li Tingli, Liu Chao, et al. A new method for quantitative description of water cone shape of vertical well in bottom water reservoir. Natural Gas and Oil, 2014, 32 (3): 34-37 (in Chinese))
[13]
涂彬, 韩洁, 孙键. 厚层底水油藏油井临界产量计算方法. 石油钻探技术, 2014, 42(4): 107-110 (Tu Bin, Han Jie, Sun Jian. a calculation method of critical production for oil wells in thick reservoirs with bottom water. Petroleum Drilling Techniques, 2014, 42(4): 107-110 (in Chinese))
[14]
Chaperon I. Theoretical study of coning toward horizontal and vertical wells in anisotropic formations. Subcritical and critical rates, SPE 15377, 1986, 521-526
[15]
Giger FM. Analytic 2-D models of water cresting before breakthrough for horizontal wells. SPE Reservoir Engineering , 1989, 4(4): 256-231
[16]
Joshi SD. Horizontal Wells Technology. Tulsa: Penn Well Publishing Company, 1991
[17]
Papatzacos P, Herring TR, Martinsen R, et al. Cone breakthrough time for horizontal wells. SPE Reservoir Engineering, 1991, 6(3): 311-318
[18]
范子菲,林志芳. 底水驱动油藏水平井临界产量公式及其变化规律研究. 石油勘探与开发,1994,21(1):65-70 (Fan Zifei. A study of critical rate of a horizontal well in a reservoir with bottom-water drive. Petroleum Exploration and Development, 1994, 21(1): 65-70 (in Chinese))
[19]
吉兰敏, 姜汉桥, 陈民锋 等. 非均质底水油藏临界产量预测. 大庆石油地质与开发, 2009, 28(6): 119-124 (Ji Lanmin, Jiang Hanqiao, Chen Minfeng, et al. Critical production prediction for heterogeneous reservoirs with bottom water. Petroleum Geology and Oilfield Development in Daqing, 2009, 28(6): 119-124 (in Chinese))
[20]
宋兆杰, 李相方, 李治平 等. 考虑非达西渗流的底水锥进临界产量计算模型. 石油学报, 2012, 33(1): 106-111 (Song Zhaojie, Li Xiangfang, Li Zhiping, et al. A model for calculating critical production rates of water coning with consideration of non-Darcy flow. Acta Petrolei Sinca, 2012, 33(1): 106-111 (in Chinese))
[21]
李传亮. 修正Dupuit临界产量公式. 石油勘探与开发, 1993, 20(1): 91-95 (Li Chuanliang. A modified Dupuit formula for critical production rate. Petroleum Exploration and Development, 1993, 20(1): 91-95 (in Chinese))
[22]
卜凌梅, 韩洪宝, 程林松. 底水油藏油井合理射开程度研究.油气地质与采收率, 2004, 11(5): 44-48 (Bu Lingmei, Han Hongbao, Cheng Linsong. Study on rational perforation degree of oil wells in reservoir with bottom water. Petroleum Geology and Recovery Efficiency, 2004, 11(5): 44-45 (in Chinese))
[23]
吕爱民, 姚军. 裂缝性碳酸盐岩底水油藏合理打开程度与合理井距. 石油勘探与开发, 2008, 35(1): 97-100 (Lü Aimin, Yao Jun. Rational perforating level and well spacing for fractured carbonate reservoirs with bottom water. Petroleum Exploration and Development, 2008, 35(1): 97-100 (in Chinese))
[24]
Hagoort J. Fundamentals of Gas Reservoir Engineering. Amsterdam: Elsevier Science Publishers B.V. 1988
[25]
Guo BY, Lee RLH. A simple approach to optimization of completion interval in oil/water coning systems. SPE Reservoir Engineering, 1993, 8(4): 249-255
[26]
Schols RS. An empirical formula for the critical oil production rate. Erdoel Erdgas, Z, 1972, 88(1): 6-11
[27]
蒋平, 张贵才, 何小娟 等.底水锥进的动态预测方法. 钻采工艺, 2006, 30(2): 71-73 (Jiang Ping, Zhang Guicai, He Xiaojuan, et al. A dynamic prediction method for bottom water coning. Drilling & Production Technology, 2006, 30(2): 71-73 (in Chinese))
[28]
蒋平. 底水锥进预测及底水治理决策技术研究. [硕士论文]. 青岛:中国石油大学,2006: 17-18 (Jiang Ping. The study of prediction of water coning and decision-making technique for water shutoff for bottom-water reservoir. [Master Thesis]. Qingdao: China University of Petroleum, 2006: 17-18 (in Chinese))
[29]
Chierici GL,Ciucci GM,Pizzi G. A systematic study of gas and water coning by potentiometric models. Journal of Petroleum Technology, 1964, 16(8): 923-929
[30]
Shirman EI, Wojtanowicz AK. Water cone hysteresis and reversal for well completions using the moving spherical sink method. The 1997 Production and Operation Symposium, Oklahoma city Oklahoma, March, 1997, SPE37467: 611-616
