Wan Y Z, Zak G, Naumann S, et al. Study of 2.5-D glass-fabric-reinforced light-curable resin composites for orthotic applications. Compos Sci Technol, 2007, 67: 2739–2746
[2]
Isaac M. Daniel, Jyi J L, et al. Three-dimensional characterization of textile composites. Composites Part B, 2008, 39: 13–19
[3]
Henager Jr C H, Shin Y, Blum Y, et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems[J].J Nucl Mater.2007, 367-370:1139-
[4]
Zhang G F, Zhang J X, Pei Y, et al. Joining of Al2O3p/Al composites by transient liquid phase (TLP) bonding and a novel process of active- transient liquid phase (A-TLP) bonding. Mater Sci Eng A, 2008, 488: 146–156
[5]
Singh M, Asthana R. Characterization of brazed joints of C-C composite to Cu-clad-Molybdenum. Compos Sci Technol, 2008, 68: 3010–3019
[6]
Xiong J T, Li J L, Zhang F S, et al. Direct joining of 2D carbon/carbon composites to Ti–6Al–4V alloy with a rectangular wave interface. Mater Sci Eng A, 2008, 488: 205–213
[7]
Miura M, Shindo Y, Narita F, et al. Mode III fatigue delamination growth of glass fiber reinforced polymer woven laminates at cryogenic temperatures. Cryogenics, 2009, 49: 407–412
[8]
Hülsenberg D, Fehling P, Leutbecher T. Damage tolerant, translucent oxide fiber/glass matrix composites. Composites Part B, 2008, 39: 362–373
[9]
Hsengji H, Anthony M W. Compressive response of Z-pinned woven glass fiber textile composite laminates: Experiments. Compos Sci Technol, 2009, 69: 2331–2337
[10]
Alince B, Bednar F, van de Ven. Deposition of calcium carbonate particles on fiber surfaces induced by cationic polyelectrolyte and bentonite. Colloids Surf A, 2001, 190: 71–80
[11]
Miao S. Polymer surface modification and characterization of particulate calcium carbonate fillers. Appl Surf Sci, 2003, 220: 359–366
[12]
Kliauga A M, Travessa D, Ferrante M. Al2O3/Ti interlayer/AISI 304 diffusion bonded joint: Microstructural characterization of the two interfaces. Mater Charact, 2001, 46: 65–74
[13]
Chen Z, Cao M S, Zhao Q Z, et al. Interfacial microstructure and strength of partial transient liquid-phase bonding of silicon nitride with Ti/Ni multi-interlayer. Mater Sci Eng A, 2004, 380: 394–401
[14]
陆佩文. 无机材料科学基础. 武汉: 武汉理工大学出版社, 1996
[15]
Dash S, Kamruddin M, Ajikumar P K, et al. Nanocrystalline and metastable phase formation in vacuum thermal decomposition of calcium carbonate. Thermochim Acta, 2000, 363: 129–135
[16]
Ayranci C, Carey J. 2D braided composites: A review for stiffness critical applications. Compos Struct, 2008, 85: 43–58 [2] Gu B H, Chang F K. Energy absorption features of 3-D braided rectangular composite under different strain rates compressive loading. Aerosp Sci Technol, 2007, 11: 535–545 [3] Wan Y Z, Zak G, Naumann S, et al. Study of 2.5-D glass-fabric-reinforced light-curable resin composites for orthotic applications. Compos Sci Technol, 2007, 67: 2739–2746 [4] Isaac M. Daniel, Jyi J L, et al. Three-dimensional characterization of textile composites. Composites Part B, 2008, 39: 13–19 [5] Henager Jr C H, Shin Y, Blum Y, et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems[J].J Nucl Mater.2007, 367-370:1139- [6] Zhang G F, Zhang J X, Pei Y, et al. Joining of Al2O3p/Al composites by transient liquid phase (TLP) bonding and a novel process of active- transient liquid phase (A-TLP) bonding. Mater Sci Eng A, 2008, 488: 146–156 [7] Singh M, Asthana R. Characterization of brazed joints of C-C composite to Cu-clad-Molybdenum. Compos Sci Technol, 2008, 68: 3010–3019 [8] Xiong J T, Li J L, Zhang F S, et al. Direct joining of 2D carbon/carbon composites to Ti–6Al–4V alloy with a rectangular wave interface. Mater Sci Eng A, 2008, 488: 205–213 [9] Miura M, Shindo Y, Narita F, et al. Mode III fatigue delamination growth of glass fiber reinforced polymer woven laminates at cryogenic temperatures. Cryogenics, 2009, 49: 407–412 [10] Hülsenberg D, Fehling P, Leutbecher T. Damage tolerant, translucent oxide fiber/glass matrix composites. Composites Part B, 2008, 39: 362–373 [11] Hsengji H, Anthony M W. Compressive response of Z-pinned woven glass fiber textile composite laminates: Experiments. Compos Sci Technol, 2009, 69: 2331–2337 [12] Alince B, Bednar F, van de Ven. Deposition of calcium carbonate particles on fiber surfaces induced by cationic polyelectrolyte and bentonite. Colloids Surf A, 2001, 190: 71–80 [13] Miao S. Polymer surface modification and characterization of particulate calcium carbonate fillers. Appl Surf Sci, 2003, 220: 359–366 [14] Kliauga A M, Travessa D, Ferrante M. Al2O3/Ti interlayer/AISI 304 diffusion bonded joint: Microstructural characterization of the two interfaces. Mater Charact, 2001, 46: 65–74 [15] Chen Z, Cao M S, Zhao Q Z, et al. Interfacial microstructure and strength of partial transient liquid-phase bonding of silicon nitride with Ti/Ni multi-interlayer. Mater Sci Eng A, 2004, 380: 394–401 [16] 陆佩文. 无机材料科学基础. 武汉: 武汉理工大学出版社, 1996 [17] Dash S, Kamruddin M, Ajikumar P K, et al. Nanocrystalline and metastable phase formation in vacuum thermal decomposition of calcium carbonate. Thermochim Acta, 2000, 363: 129–135
[17]
Ayranci C, Carey J. 2D braided composites: A review for stiffness critical applications. Compos Struct, 2008, 85: 43–58
[18]
Gu B H, Chang F K. Energy absorption features of 3-D braided rectangular composite under different strain rates compressive loading. Aerosp Sci Technol, 2007, 11: 535–545
