4 Nair B G, Zhao Q, Cooper R F. Geopolymer matrices with improved hydrothermal corrosion resistance for high-temperature applications. J Mater Sci, 2007, 42: 3083-3091
[2]
5 Papakonstantinou C G, Balaguru P, Lyon R E. Comparative study of high temperature composites. Compos B Eng, 2001, 32: 637-649
[3]
6 Bell J L, Driemeyer P E, Kriven W M. Formation of ceramics from metakaolin-based geopolymers. Part II: K-based geopolymer. J Am Ceram Soc, 2009, 92: 607-615
[4]
7 Duxson P, Lukey G C, van Deventer J S J. Thermal evolution of metakaolin geopolymers: Part 1—Physical evolution. J Non-Cryst Solids, 2006, 352: 5541-5555
[5]
8 Xie N, Bell J L, Kriven W M. Fabrication of structural leucite glass-ceramics from potassium-based geopolymer precursors. J Am Ceram Soc, 2010, 93: 2644-2649
[6]
9 He P G, Jia D C, Wang M R, et al. Thermal evolution and crystallization kinetics of potassium-based geopolymer. Ceram Int, 2011, 37: 59-63
[7]
10 He P, Jia D, Wang S. Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor. J Eur Ceram Soc, 2013, 33: 689-698
[8]
11 Bell J L, Driemeyer P E, Kriven W M. Formation of ceramics from metakaolin-based geopolymers. Part I: Cs-based geopolymer. J Am Ceram Soc, 2009, 92: 1-8
[9]
12 Yanase I, Tamai S, Kobayashi H. Low-thermal-expansion properties of sodium- and lithium-substituted cubic cesium leucite compounds. J Am Ceram Soc, 2003, 86: 1360-1364
[10]
13 Yanase I, Ichiyoshi K, Kobayashi H. Structural phase transition of Na-substituted Cs-leucite compounds in the range 123-1173 K. Solid State Commun, 2006, 139: 1-4
[11]
14 Yanase I, Tamai S, Matsuura S, et al. Fabrication of low thermal expansion porous body of cubic cesium-deficient type pollucite. J Eur Ceram Soc, 2005, 25: 3173-3179
[12]
22 He P, Jia D, Lin T, et al. Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites. Ceram Int, 2010, 36: 1447-1453
[13]
23 Wen G W. Investigation of the discontinuous phases reinforced fused silica composites (in Chinese). Doctor Dissertation. Harbin: Harbin Institute of Technology, 1996. 38-45 [温广武. 不连续体增强熔石英陶瓷复合材料的研究. 博士学位论文. 哈尔滨: 哈尔滨工业大学, 1996. 38-
[14]
24 Zhou Y D. Physical and Chemical Properties of Inorganic Materials (in Chinese). Wuhan: Wuhan University of Technology Press, 1992. 220-222 [周亚栋. 无机材料物理化学. 武汉: 武汉工业大学出版社, 1992. 220-
[15]
25 Lin T S, Jia D C, He P G, et al. Thermo-mechanical and microstructural characterization of geopolymers with α-Al2O3 particle filler. Int J Thermophys, 2009, 30: 1568-1577
[16]
26 Zhang Y, Wu J, Rao P, et al. Low temperature synthesis of high purity leucite. Mater Lett, 2006, 60: 2819-2823
[17]
27 Takei T, Kameshima Y, Yasumori A, et al. Crystallization kinetics of mullite from Al2O3-SiO2 glasses under non-isothermal conditions. J Eur Ceram Soc, 2001, 21: 2487-2493
[18]
38 Yoshida K, Yano T. Room and high-temperature mechanical and thermal properties of SiC fiber-reinforced SiC composite sintered under pressure. J Nucl Mater, 2000, 283-287: 560-564
[19]
39 He P G. Processing and characterization of the Cf/geopolymer derived ceramic matrix composites (in Chinese). Doctor Dissertation. Harbin: Harbin Institute of Technology, 2011 [何培刚. Cf/铝硅酸盐聚合物及其转化陶瓷基复合材料的研究. 博士学位论文. 哈尔滨: 哈尔滨工业大学,
[20]
35 He P, Jia D, Wang M, et al. Improvement of high-temperature mechanical properties of heat treated Cf/geopolymer composites by sol-SiO2 impregnation. J Eur Ceram Soc, 2010, 30: 3053-3061
[21]
36 Jia D, Zhou Y, Lei T. Ambient and elevated temperature mechanical properties of hot-pressed fused silica matrix composite. J Eur Ceram Soc, 2003, 23: 801-808
[22]
37 Lyons J S, Starr T L. Strength and toughness of slip-cast fused-silica composites. J Am Ceram Soc, 1994, 77: 1673-1675
[23]
1 Davidovits J. Geopolymers-inorganic polymeric new materials. J Therm Anal, 1991, 37: 1633-1656
[24]
2 Davidovits J, Davidovics M. Geopolymer-ultra-high temperature tooling material for the manufacture of advanced composites. In: International Sample Technical Conference Series, 1991, 36: 1939-1949
[25]
3 Duxson P, Fernández-Jiménez A, Provis J L, et al. Geopolymer technology: The current state of the art. J Mater Sci, 2007, 42: 2917-2933
[26]
15 Dove M T, Cool T, Palmer D C, et al. On the role of Al-Si ordering in the cubic-tetragonal phase transition of leucite. Am Miner, 1993, 78: 486-492
[27]
16 Bedard R L, Broach R W, Flanigen E M. Leucite-pollucite glass ceramics: A new family of refractory materials with adjustable thermal-expansion. MRS Online Proc Lib, 1992, 271: 119-123
[28]
17 Palmer D C, Dove M T, Ibberson R M, et al. Structural behavior, crystal chemistry, and phase transitions in substituted leucite: High-resolution neutron powder diffraction studies. Am Miner, 1997, 82: 16-29
[29]
18 Chen X B, Zhang B Y, Xing L Y. Application and development of advanced polymer matrix composites (in Chinese). Mater China, 2009, 28: 2-12 [陈祥宝, 张宝艳, 邢丽英. 先进树脂基复合材料技术发展及应用现状. 中国材料进展, 2009, 28: 2-
[30]
19 Rasmussen S T, Groh C L, O'Brien W J. Stress induced phase transformation of a cesium stabilized leucite porcelain and associated properties. Dent Mater, 1998, 14: 202-211
[31]
20 Denry I L, Mackert J R, Holloway J A, et al. Effect of cubic leucite stabilization on the flexural strength of feldspathic dental porcelain. J Dent Res, 1996, 75: 1928-1935
[32]
21 He P, Jia D, Wang M, et al. Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer. Ceram Int, 2010, 36: 2395-2400
[33]
28 Duxson P, Lukey G C, van Deventer J S J. The thermal evolution of metakaolin geopolymers: Part 2—Phase stability and structural development. J Non-Crystal Solids, 2007, 353: 2186-2200
[34]
29 Blackford M G, Hanna J V, Pike K J, et al. Transmission electron microscopy and nuclear magnetic resonance studies of geopolymers for radioactive waste immobilization. J Am Ceram Soc, 2007, 90: 1193-1199
[35]
30 Xie N, Bell J L, Krivenw W M. Fabrication of structural leucite glass-ceramics from potassium-based geopolymer precursors. J Am Ceram Soc, 2010, 93: 2644-2649
[36]
31 Cesar P F, Gonzaga C C, Okada C Y, et al. Variables that affect the indentation fracture testing (IF) of a dental porcelain. Mater Sci Forum, 2003, 415-418: 663-668
[37]
32 Sheu T S, O'Brien W J, Rasmussen S T, et al. Mechanical properties and thermal expansion behaviour in leucite containing materials. J Mater Sci, 1994, 29: 125-128
[38]
33 Hashimoto S, Sato F, Honda S, et al. Fabrication and mechanical properties of sintered leucite body. J Ceram Soc Jpn, 2005, 113: 488-490
[39]
34 Hatch D M, Ghose S, Stokes H T. Phase transitions in leucite, KAISi2O6—I. Symmetry analysis with order parameter treatment and the resulting microscopic distortions. Phys Chem Miner, 1990, 17: 220-227
