TTNomura.SinIlgle-dtop method for determination of cyanidein solution with a piezoelectric quartz crystaI[J].Anal.Chim.Acta,1981.124(1):81.
[2]
BBrucenstein S,M Shay.Experimental aspects of use of thequartz crystal microbalance in solution[J].Electrochem Acta,1985,30(10):1295.
[3]
FForslund M,MaJoros J,Leygraf C.A sensor system for highresolution in situ atmospheric corrosivity monitoring in field en-vironments[J].Electrochem,Society,1997,144(8):2637.
[4]
IItoh J,Sasaki Seo M,Ishikawa T.In-situ simultaneous meas-urement with IR-RAS and QCMfor investigation of copper in agaseous environment[J].Corrosion Science,1997,39(1):193.
[5]
ZZakipour S,Leygraf C.Studies of corrosion kinetics on electri-cal contact materials by means of quartz crystal microbalanceand XPS[J].Electrochem.Society,1986,133(5):873.
[6]
AAastrup T,Leygraf C.Simultaneous infrared reflection absorp-tion spectroscopy and QCMmeasurements for in-situ studies ofthe metal/atmospbere interface[J].Electrochem Society,1997,144(9):2986.
[7]
HHager HE,Ruedisuili R D,Buehler ME.Use of piezoelectriccrystals as electrode substrates in iron corrosion studies:The re-al-time,in situ determination of dissolution and film formationreaction rates[J].Corrosion,1986,42:345.
[8]
DDirk Jope,Joachim Sell.Application of a guartz crystal mi-crobalance to the study of copper corrosion in acid solution in-hibited by triazole-iodide protective films[J].Electrochem So-ciety,1995,142:2170.
Itoh J,Sasaki T,Ohtsuka T.The influence of oxide layers on in-itial corrosion behavior of copper in air containing water raporand sulfur dioxide[J].Corrosion Science,2000,42(9):1539.
[17]
Takeshi sasaki,Jun Itoh.Quanttative determination of corrosionproducts and adsorbed water on copper in humid air contmningSO2by IR-RAS measurements[J].Corrosion Science,2006,48:4339.
[18]
Qu Q,Li L,Bai W,et al.Initial atmospheric corrosion of Zincin presence of Na2SO4and(NH4)2SO4[J].Transactions ofNonferrous Metals Society of China,2006,8,16(4):887.
[19]
Qu Q,Li L,Bai W,et al.Effects of NaCl and NH4Cl on the in-itial atmospheric corrosion of zinc[J].Corrosion Science,2005,47(11):2832.
[20]
Qu Q,Yan C W,Bai w,et al.Influence of NaCl deposition onatmospheric corrosion of zinc in the presence of SO2[J].ActaMetallurgica Sinica,2001,637(1):72.
[21]
Taguchi M,Watanabe M.Mass change of nickel fresh surface atthe beginning of oxidation[J].Journal of the Japan Institute ofMetals,2001,165(1):38.
[22]
Lee s,Staehle R W.Adsorption of water on copper,nickel andiron[J].Corrosion,1997,53(1):33.
[23]
Lee S,Staehle RW.Study of water adsorbed on gold:Assess-ment of polarization model[J].Materials Transactions Jim,1996,37(12):1768.
[24]
Lee S,Staehle RW.Adsorption of water on gold[J].Corrosion,1996,52(11):843.
Wang D H,Tang X A,Qiu Y Y,et al.Study of the film forma-tion kinetics on zinc in different acidic corrosion inhibitor solu-tions by quartz crystal microbalance[J].Corrosion Science,2005,47(9):2157.
[27]
SZOCS E,Vastag G.Electrochemical behaviour of an inhibitorfilm formed on copper surface[J].Corrosion Science,2005,47(4):893.
[28]
Gabrielli C,Keddam M.Investigation of Zinc chromatation.I.Application of OCM-ICP coupling[J].Electrochimica Acta,2003,48(8):965.
[29]
Telegdi J,shaban A,Kalman E.EQCM study of copper and i-ron corrosion inhibition in presence of organic inhibitors andbiocides[J].Electrochimica Acta,2000,45(22-23):3639.
[30]
Knag M,Tammelin T.Adsorption of polycation and anionic sur-factant onto iron surfaces and the inhibition of carbon dioxidecorrosion[J].Journal of Dispersion Science and Technology,2006,27(2):277.
[31]
D Gime′nez-Romero.Calculation of the surface concentration ofZn(I)from the anodic voltammetric peak of zinc combinedwith the QCM results[J].Electrochemistry Communications,2004,6:903.
[32]
S Joiret,M Keddam.Use of EIS,ring-disk electrode,EQCMand raman spectroscopy to study the film of oxides formed on i-ron in 1M NaOH[J].Cement&Concrete Composites,2002,24:7.
[33]
Fredrik Falkenberg,Koji Fushimi,Masahiro Seo.Study on initi-ation of localised corrosion on copper thin film electrode bycombinational use of an EQCM with a liquid-phase ion gun[J].Corrosion Science,2003,45:2657.
[34]
HAntony,S Peulon.Electrochemical synthesis of lepidocrocitethin films on gold substrate-EQCM,IRRAS,SEM and XRDstudy[J].Electrochimica Acta,2004,50:1015.
Schmutz P,Landolt D.Electrochemical quartz crystal microbal-ance study of the transient response of passive Fe-25Cr alloy[J].Electrochem Acta,1999,45(6):899.
[38]
Cao Z,Gu N.Investigation on gold corrosion by in situ quartzcrystal microbalance and atomic force microscopy in self-as-sembled processes of alkanethiol monolayers[J].Materials Let-ters,2005,59(28):3687.
[39]
Cao Z,Xiao Z L.Corrosion behaviors on polycrystalline goldsubstrates in self-assembled processes of alkanethiol monolay-ers[J].Analytical Letters,2005,38(8):1289.
[40]
Grigucevicience A,Leinartas K.Structure and initial corrosionresistance of sputter deposited nanocrystalline Mg-Al-Zr alloys[J].Materials Science and Engineering A-structural MaterialsProperties Microstructure and Processing,2005,394(1-2):411.
[41]
Taguchi M,Sugita H.Analysis for electrolytic oxidation and re-duction of PbSO4/Pb electrode by electrochemical QCM tech-nique[J].Joural of Power Sources,2002,109(2):294.
[42]
Zabarnick S,Zelesnik P,Whitacre S D.Silver corrosion andsulfur detection using a quartz crystal microbalance with silverelectrode surfaces[J].Industrial and Engineering ChemistryResearch,1996,35(8):2576.
[43]
Lin C F,Porter M D,Hebert K R.Surface-films produced bycathodic polarization of aluminum[J].Journal of the Electro-chemical Society,1994,141(1):96.