Hoeppner D W, Grimes A H, Ledesma A, et al. Corrosion and fretting as critical aviation safety issues[A]. 18th ICAF Symposium[C]. Melbourne, Australia, 1995
[2]
Zhou Z R, Fayeulle S, Vincent L. Cracking behavior of various aluminium alloy during fretting wear[J].Wear, 1992, 155: 317
[3]
Xue M, Wet J, Bastias P, et al. Fretting corrosion in airframe riveted and pinned connections[R]. 1998
[4]
Blanchard P, Colombie C, Pellerin V, et al. Material effects in fretting wear: application to iron, titanium and aluminum alloy[J]. Metall. Trans., 1995, 22A: 1535
[5]
Goto H, Ashida M, Endo K. The influence of oxygen and water vapor on the friction and wear of an aluminum alloy under fretting conditions[J].Wear, 1987, 116: 141
[6]
Waterhouse R B. Fretting wear[J]. ASM Int., 1992, 18: 242
Waterhouse R B. Avoidance of fretting fatigue failures[A]. Fretting Fatigue [C]. Applied Science Publishers, London, 1981: 221
[9]
Leadbeater G, Noble B, Waterhouse R B. The fatigue of an aluminum alloy produced by fretting on shot-peened surfaces[A]. Proceedings of 6th Int. Conf. on Fracture[C]. India, 1984, 3: 2125
[10]
Gabel M K, Bethk J. Coatings for fretting prevention[J]. Wear, 1979, 46: 531
[11]
Vardiman R G, Creighton D. Effect of ion implantation on fretting fatigue in Ti-6Al-4V alloy[A]. Materials Evaluation under Fretting Conditions, ASTM STP 780[C]. American Society for Testing and Materials,West Conshohocken, PA, 1982: 138
[12]
张晓化. 高温下钛合金微动疲劳行为及表面处理技术影响的研究[D]. 西北工业大学, 2004
[13]
刘凤岭. 微弧氧化与表面技术[J]. 材料保护, 1997, 30(3): 22
[14]
Choppy K J, Kovar R F, Cushman B M. Fretting wear-resistant, micro-arc oxidation coatings for aluminum and titanium alloy bearings[R]. 2008
