全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Kelvin探针测量技术在电化学研究中的应用进展

, PP. 440-444

Keywords: Kelvin探针测量技术,电化学研究

Full-Text   Cite this paper   Add to My Lib

Abstract:

Kelvin探针测量技术被引入到腐蚀研究领域后,成为研究薄液膜和有机涂层下金属腐蚀的有力电化学工具和手段.Kelvin探针技术与原子力显微镜技术相结合产生出扫描Kelvin探针力显微镜,使Kelvin技术在材料研究和腐蚀领域得到了更好的应用.本文简述了Kelvin探针技术的测量原理和装置,重点综述了近十年来该技术在电化学研究中的应用进展.

References

[1]  SStratmann M.The investigation of the corrosion properties ofmetals covered with adsorbed electrolyte layers-a new experi-mental technique[J].Corrosion Science,1987,27(8):869.
[2]  SStratmann M,Streckel H.On the atmospheric corrosion of met-als which are covered with thin electrolyte layers-I.Verificationof the experimental technique;-II.Experimental results[J].Corrosion Science,1990,30(6/7):681.
[3]  SStratmann M,Streckel HK TKim,S Crockett.On the atmos-pheric corrosion of metals which are covered with thin electro-lyte layers-Ⅲ.the measurement of polarisation curves on metalsurfaces which are covered by thin electrolyte layers[J].Corro-sion Science,1990,30(6/7):715.
[4]  王王燕华,张涛,王佳,等.Kelvin探头参比电极技术在大气腐蚀研究中的应用[J].中国腐蚀与防护学报,2004,24(1):59.
[5]  TTahara,Akira,Kodama,Toshiaki.Potential distribution meas-urement in galvanic corrosion of Zn/Fe couple by means ofKelvin probe[J].Corrosion Science,2000,42(4):655.
[6]  NNonnenmacher,M.O'Boyle,M.P.,Wickramasinghe,H.K.Kelvin probe force microscopy[J].Applied Physics Letters,1991,(58):2921.
[7]  邹邹锋,韩薇,龙康,等.线性回归法进行Kelvin电位测试[J].腐蚀科学与防护技术,1995,7(1):17.
[8]  王王佳,水流彻.使用Kelvin探头参比电极技术进行薄液层下电化学测量[J].中国腐蚀与防护学报,1995,15(3):173.
[9]  孙孙志华,刘明辉,李家柱,等.大气腐蚀电化学测定研究[J].航空材料学报,2000,20(3):120.
[10]  孙志华,刘明辉,邹礼明,等.用Kelvin探头技术研究铝合金的大气腐蚀[J].腐蚀科学与防护技术,2006,18(2):87.
[11]  Eimutis Juzeliunas,Aloyzas Sudavicius,Klaus Juttner,et al.Study of initial stages of Al-Mg alloy corrosion in water,chlo-ride and Cu(II)environment by a scanning Kelvin probe andXPS[J].Electrochemistry Communications,2003,(5):154.
[12]  王佳,水流彻.使用Kelvin探头参比电极技术研究液层厚度对氧还原速度的影响[J].中国腐蚀与防护学报,1995,15(3):180.
[13]  邹峰,韩薇.利用Kelvin探针进行金属薄液层下电化学测量[J].腐蚀科学与防护技术,1995,7(3):192.
[14]  Masuda H.Effect of magnesium chloride liquid thickness on at-mospheric corrosion of pure iron[J].Corrosion,2001,57(2):99.
[15]  Albani O,Huang S M,Oriani R A.Use of the Kelvin probetechnique to study corrosion by ionic particles in humid gases[J].Corrosion Science,1994,50(5):331.
[16]  Yee Shelgon,Oriani,R A,Stratmann M Application of a kelvinmicroprobe to the corrosion of metals in humid atmospheres[J].Journal of the Electrochemical Society,1991,138(1):55.
[17]  Lobnig R E,Siconolfi D J,Psota-Kelty L,et al.Atmosphericcorrosion of zinc in the presence of ammonium sulfate particles[J].Journal of the Electrochemical Society,1994,141(1):2935.
[18]  Lobnig R E,Siconolfi D J,Psota-Kelty L,et al.Atmosphericcorrosion of aluminum in the presence of ammonium sulfateparticles[J].Journal of the Electrochemical Society,1996,143(4):1176.
[19]  Lobnig R E,Siconolfi D J,Psota-Kelty L,et al.Mechanism ofatmospheric corrosion of copper in the presence of submicronammonium sulfate particles at 300 and 373K[J].Journal ofthe Electrochemical Society,1996,143(5):1539.
[20]  王佳.无机盐微粒沉积和大气腐蚀的发生和发展[J].中国腐蚀与防护学报,2004,24(3):155.
[21]  A Nazarov,D Thierry.Rate-determining reactions of atmospher-ic corrosion[J].Electrochimica Acta,2004,(49):2717.
[22]  X Zhang,W G Sloof,A Hovestad,et al.Characterization ofchromate conversion coatings on zinc using XPS and SKPFM[J].Surface&Coatings Technology,2005,(197):168.
[23]  F櫣rbeth W,Stratmann M.Investigation of the delamination ofpolymer films from galvanized steel with the scanning Kelvinprobe[J].Fresenius Janal Chemistry,1995,353:337.
[24]  F櫣rbeth W,Stratmann M.The delamination of polymeric coat-ings from electrogalvanised steel-a mechanistic approach.part1-3[J].Corrosion Science,2001,43:207.
[25]  Leng A,Streckel H,Stratmann M.The delamination of polymer-ic coatings from steel.part 1-3[J].Corrosion Science,1999,41:547.
[26]  Doherty M,Sykes J M.Micro-cells beneath organic lacquers:astudy using scanning Kelvin probe and scanning acoustic mi-croscopy[J].Corrosion Science,2004,46:1265.
[27]  B Reddy,MJ Doherty,J M Sykes.Breakdown of organic coat-ings in corrosive environments examined by scanning kelvinprobe and scanning acoustic microscopy[J].ElectrochimicaActa,2004,(49):2965.
[28]  B Reddy,J MSykes.Degradation of organic coatings in a corro-sive environment:a study by scanning Kelvin probe and scan-ning acoustic microscope[J].Progress in Organic Coatings,2005,(52):280.
[29]  Schmidt W,Stratmann M.Scanning Kelvin probe investigationsof filiform corrosion on aluminum alloy 2024-T3[J].CorrosionScience,1998,40(8):1441.
[30]  J HW de Wit.New knowledge on localized corrosion obtainedfrom local measuring techniques[J].Electrochimica Acta,2001,(46):3641.
[31]  Han LT,Mansfeld F.Scanning Kelvin probe analysis of weldedstainless steel[J].Corrosion Science,1997,39(1):199.
[32]  邹峰,Dominigue Thierry,韩文安,等.应用Kelvin探针研究不锈钢焊接区的耐蚀性[J].腐蚀科学与防护技术,1997,9(4):276.
[33]  Nazarov A,Thierry D.Analysis of surface carbon contaminationon phosphated zinc surfaces by scanning Kelvin probe measure-ments[J].J.Electrochem.Society,1998,145(3):L39.
[34]  王燕华,王佳,张际标.AZ91D镁合金微弧氧化过程中的火花放电现象研究[J].中国腐蚀与防护学报,2006,26(5):267.
[35]  J HW de Wit.Local potential measurements with the SKPFMon aluminium alloys[J].Electrochimica Acta,2004,(49):2841.
[36]  F Andreatta,HTerryn,J H W de Wit.Corrosion behaviour ofdifferent tempers of AA7075 aluminium alloy[J].Electrochim-ica Acta,2004,(49):2851.
[37]  L E Fratila-Apachitei,I Apachitei,J Duszczyk.Characterizationof cast AlSi(Cu)alloys by scanning Kelvin probe force micros-copy[J].Electrochimica Acta,2006,(51):5892.
[38]  F Andreatta,I Apachitei,A A Kodentsov,et al.Volta potentialof second phase particles in extruded AZ80 magnesium alloy[J].Electrochimica Acta,2006(51):3551.
[39]  A Davoodi,J Pan,C Leygraf,et al.Integrated AFM and SECMfor in situ studies of localized corrosion of Al alloys[J].Elec-trochimica Acta.2007,52(27):7697.P

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133