Song R G, Dietzel W, Zhang B J, et al. Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy [J]. Acta Mater., 2004, 52(16): 4727
[4]
Abreu C M, Cristobal M J, Figueroa R, et al. Influence of molybdenum ion implantation on the localized corrosion rsistance of a high strength aluminium alloy [J]. Corros. Sci., 2012, 54: 143
[5]
褚武扬. 氢损伤与滞后断裂 [M]. 北京: 冶金工业出版社, 1988
[6]
Qiao L J, Mao X, Chu W Y. The Role of hydrogen in stress-corrosion cracking of austenitic stainless steel in hot MgCl 2 solution [J]. Metall. Mater. Trans., 1995, 26A: 1777
[7]
EI-Amoush A S. Investigation of corrosion behaviour of hydrogenated 7070-T6 aluminum alloy [J]. J. Alloys Compd., 2007, 443(1/2): 171
[8]
Liao H L, Lin J C, Lee S L. Effect of pre-immersion on the SCC of heat-treated AA7050 in an alkaline 3.5%NaCl [J]. Corros. Sci., 2009,
Najjar D, Magnin T, Warner T J. Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy [J]. Mater. Sci. Eng., 1997, A238(2): 293
