Zin I M, Lyon S B, Hussain A. Under-film corrosion of epoxy-coated galvanized steel: An EIS and SVET study of the effect of inhibition at defects [J]. Prog. Org. Coat., 2005, 52: 126.
[3]
Furbeth W, Stratmann M. The delamination of polymeric coatings from electrogalvanised steel – a mechanistic approach. Part 1: delamination from a defect with intact zinc layer [J]. Corros. Sci., 2001, 43: 207.
[4]
Naderi R, Attar M M, Moayed M H. EIS examination of mill scale on mild steel with polyester–epoxy powder coating [J]. Prog. Org. Coat., 2004, 50: 162.
[5]
Zou F, Thierry D. Localized electrochemical impedance spectroscopy for studying the degradation of organic coatings [J]. Electrochim. Acta., 1997, 42 (20-22): 3293.
[6]
Taylor S R. Incentives for using local electrochemical impedance methods in the investigation of organic coatings [J]. Prog. Org. Coat., 2001, 43: 141.
[7]
Guillaumin V, Landolt D. Effect of dispersion agent on the degradation of a water borne paint on steel studied by scanning acoustic microscopy and impedance [J]. Corros. Sci., 2002, 44 (1): 179.
[8]
Stratmann M, Bohnenkamp K, Ramchandran T. The influence of copper upon the atmospheric corrosion of iron [J]. Corros. Sci., 1987, 27 (9): 905.
[9]
Stratmann M, Streckel H. On the atmospheric corrosion of metals which are covered with thin electrolyte layers—II. Experimental results [J]. Corros. Sci., 1990, 30 (6-7): 697.
[10]
Leng A, Streckel H, Stratmann M. The delamination of polymeric coatings from steel. Part 1: Calibration of the Kelvin probe and basic delamination mechanism [J]. Corros. Sci., 1999, 41: 547.
[11]
Leng A, Streckel H ,Stratmann M. The delamination of polymeric coatings from steel . part 3 : effect of the oxygen partial pressure on the delamination reaction and current distribution at the metal/ polymer interface [J]. Corros.Sci. 1999, 41: 599.
[12]
Reddy B, Doherty M J, Sykes J M. Breakdown of organic coatings in corrosive environments examined by scanning Kelvin probe and scanning acoustic microscopy[J]. Electrochim. Acta., 2004, 49: 2965.
[13]
Reddy B, Sykes J M. Degradation of organic coatings in a corrosive environment: a study by scanning Kelvin probe and scanning acoustic microscope [J]. Prog. Org. Coat., 2005, 52: 280.
[14]
Zhao X, Wang J, Wang Y H, et al. Analysis of deterioration process of organic protective coating using EIS assisted by SOM network [J]. Electrochem. Commun., 2007, 9: 1394.
[15]
曹楚南, 张鉴清. 电化学阻抗谱导论[M]. 北京: 科学出版社, 2002.154.
[16]
Doherty M, Sykes J M. Micro-cells beneath organic lacquers: a study using scanning Kelvin probe and scanning acoustic microscopy [J]. Corros. Sci.,2004, 46: 1265.
[17]
Adhikari A, Claesson P, Pan J S, et al. Electrochemical behavior and anticorrosion properties of modified polyaniline dispersed in polyvinyl acetate coating on carbon steel [J]. Electrochim. Acta., 2008, 53: 4239.
[18]
张伟, 王佳，赵增元, 等. 高等学校化学学报[J]，2009,30(4): 762.
[19]
Stratmann M, Leng A, Fiirbeth.W, et al. The scanning Kelvin probe: a new technique for the in situ analysis of the delamination of organic coatings [J]. Prog. Org. Coat., 1996, 27: 261.
[20]
Leng A, Streckel H, Stratmann M. The delamination of polymeric coatings from steel. part 2 :first stage of delamination, effect of type and concentration of cations on delamination, chemical analysis of the interface [J]. Corros. Sci., 1999, 41:579.
