Diercks D R, Shack W J, Muscara J. Overview of steam generator tube degradation and integrity issues[J]. Nuclear Engineering and Design, 1999, 194(1): 19.
[2]
Symons D M. Effect of carbide precipitation on the hydrogen-enhanced fracture behavior of alloy 690[J]. Metallurgical and Materials Transactions A, 1998, 29A(4): 1265.
Stiller K, Nilsson J O, Norring K. Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690[J]. Metallurgical and Materials Transactions A, 1996, 27A (2): 327.
[8]
Sui G, Titchmarsh J M, Heys G B, et al. Stress corrosion cracking of alloy 600 and alloy 690 in hydrogen/steam at 380℃[J]. Corrosion Science, 1997, 39(3): 565.
[9]
Kai J J, Yu G P, Tsai C H, et al. Effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of INCONEL alloy 690[J]. Metallurgical Transactions A, 1989, 20A(10): 2057.
Yong B A, Gao X S, Srivatsan T S. The response of alloy 690 tubing in a pressurized water reactor environment[J]. Materials and Design, 2007, 28(10): 373.
[12]
Brown C M , Mills W J. Fracture toughness of alloy 690 and EN52 welds in air and water[J]. Metallurgical and Materials Transactions A, 2002, 33A (6): 1725.
[13]
Mills W J. On the relationship between stretch zone formation and the J integral for high strain-hardening materials[J]. Journal of Testing and Evaluation, 1981, 9(1): 56.
[14]
褚武扬. 氢损伤与滞后断裂[M]. 北京: 冶金工业出版社, 1988. 190
[15]
褚武扬, 乔立杰, 陈奇志. 断裂与环境断裂[M]. 北京: 科学出版社, 2000. 101.
[16]
李秀艳, 李依依. 奥氏体合金的氢损伤[M]. 北京: 科学出版社, 2003.13.
[17]
Liang Y, Sofronis P. On hydrogen-induced void nucleation and grain boundary decohesion in nickel-base alloys[J]. Transactions of the ASME, 2004, 126(4): 368.
