Vignal V, Krawiec H, Heintz O, et al. The use of local electrochemical probes and surface analysis methods to study the electrochemical behaviour and pitting corrosion of stainless steels [J]. Electrochim. Acta, 2007, 52: 4994
[5]
Vuillemin B, Philippe X, Oltra R, et al. SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection [J]. Corros. Sci., 2003, 45: 1143
[6]
Yan M C, Gelling V J, Hinderliter B R, et al. SVET method for characterizing anti-corrosion performance of metal-rich coatings [J]. Corros. Sci., 2010, 52(8): 636
[7]
Vooys A, Weijde H. Investigating cracks and crazes on coated steel with simultaneous SVET and EIS [J]. Prog. Org. Coat., 2011, 71(3):
[8]
Deshpande K B. Experimental investigation of galvanic corrosion：comparison between SVET and immersion techniques [J]. Corros. Sci., 2010, 52(9): 2819
[9]
Sim?es A M, Fernandes J C S. Studying phosphate corrosion inhibition at the cut edge of coil coated galvanized steel using the SVET and EIS [J]. Prog. Org. Coat., 2010, 69(2): 219
[10]
Tang X, Cheng Y F. Localized dissolution electrochemistry at surface irregularities of pipeline steel [J]. Appl. Surf. Sci., 2008, 254 (16): 5199
[11]
Neema S, Selvara M, Raguraman J, et al. Investigating the self healing process on coated steel by SVET and EIS techniques [J]. J. Appl. Polym. Sci., 2012, 127(1): 740
[12]
Izquierdo J, Nagy L, Souto R M, et al. Resolution of the apparent experimental discrepancies observed between SVET and SECM for the characterization of galvanic corrosion reactions [J]. Electrochem. Commun., 2013, 27: 50
[13]
Stratmann M, Leng A, Fiirbeth W. The scanning Kelvin probe: A new technique for the in situs analysis of the delamination of organic coatings [J]. Prog. Org. Coat., 1996, 27(4): 261
Jorcin J B, Aragon E, Merlatti C, et al. Delaminated areas beneath organic coating：A local electrochemical impedance approach [J]. Corros. Sci., 2006, 48(7): 1779
[18]
Yanson Y I, Schenkel F, Rost M J. Design of a high-speed electrochemical scanning tunneling microscope [J]. Rev. Sci. Instr., 2013, 84(2): 023702
[19]
Schlaup C, Spaenig A, Broekmann P, et al. Sulfide anion interaction with Cu (1 0 0) and Cu modified Au (1 0 0): An electrochemical STM study [J]. Phys. Status Solidi, 2010, 207A: 254
Williford R E, Windisch C F, Jones R H. In - situ observations of the early stages of localized corrosion in type 304 SS using the electrochemical atomic force microscope [J]. Mater. Sci. Eng., 2000, A288(1): 54
[22]
Li J, Meier D J. An AFM study of the properties of passive films on iron surfaces [J]. J. Electroanal. Chem., 1998, 454(1): 53
[23]
Luong T, Nishikata A, Tsuru T. Scanning electrochemical microscope study on pitting corrosion of iron [J]. Electrochemistry, 2003,
[24]
Volker E, Inchauspe C G, Calvo E. Scanning electrochemical microscopy measurement of ferrous ion fluxes during localized corrosion steel [J]. Electrochem. Commun., 2006, 8(l): 179
[25]
Lister T E, Pinhero P J. Microelectrode array microscopy: Investigation of dynamic behavior of localized corrosion at type 304 stainless steel surfaces [J]. Anal. Chem., 2005, 77(8): 2601
[26]
Rajendran L, Ananthi S P. Analysis of positive feedback currents at the scanning electrochemical microscope [J]. J. Electroanal. Chem., 2003, 561: 113
[27]
Wang W, Zhang J, Han L H, et al. Generation/collection mode of SECM with combined probe [J]. Chin. Chem. Lett., 2011, 23(1): 86
[28]
Mandler D, Meltzer S. Micro electrochemistry on surfaces with the scanning electrochemical microscope (SECM). [J]. Isr. J. Chem., 2013, 36(1): 73
[29]
Janin M, Ghilane J, Lacroix J C. Scanning electrochemical microscopy for the fabrication of copper nanowires: Atomic contacts with quantized conductance, and molecular adsorption effect [J]. Electrochim. Acta, 2012, 83: 7
[30]
Fushimi K, Takabatake Y, Nakanishi T, et al. Microelectrode techniques for corrosion research of iron [J]. Electrochim. Acta, 2013, 113: 741
[31]
Katemann B B, Inchauspe C G, Castro P A. Precursor sites for localized corrosion on lacquered tinplates visualized by means of alternating current scanning electrochemical microscopy [J]. Electrochim. Acta, 2003, 48(9): 1115
[32]
P?hler M, Santana J J, Schuhmann W, et al. Application of AC-SECM in corrosion science: Local visualisation of inhibitor films on active metals for corrosion protection [J]. Chem. Eur. J., 2011, 17(3): 905
[33]
Bastos A C, Sim?es A M, Souto R M. Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates [J]. Prog. Org. Coat., 2005, 53(3): 177
[34]
Souto R M, González-García Y, González S. Characterization of coating systems by scanning electrochemical microscopy: Surface topology and blistering [J]. Prog. Org. Coat., 2010, 68: 40
[35]
Souto R M, González-García Y, González S. Evaluation of the corrosion performance of coil-coated steel sheet as studied by scanning electrochemical microscopy [J]. Corros. Sci., 2008, 50(6): 1637
[36]
Souto R M, González-García Y, González S. In-situ monitoring of electroactive species by using the scanning electrochemical microscope: Application to the investigation of degradation processes at defective coated metals [J]. Corros. Sci., 2005, 47(12): 3312
[37]
Gabrielli C, Joiret S, Keddam M. A SECM assisted EQCM study of iron pitting [J]. Electrochim. Acta, 2007, 52(27): 7706
[38]
Gonzalez-Garcia Y, Burstein G T, Gonzalez S, et al. Imaging metastable pits on austenitic stainless steel in situ at the open-circuit corrosion potential [J]. Electrochem. Commun., 2004, 18(6): 637
[39]
Fushimi K, Kirsten A L, Habazaki H. Heterogeneous hydrogen evolution on corroding at Fe-3%Si surface observed by scanning electrochemical microscopy [J]. Electrochim. Acta, 2007, 52: 4246
[40]
Sen?z C, Maljusch A, Rohwerder M, et al. SECM and SKPFM studies of the local corrosion mechanism of al alloys-A pathway to an integrated SKP-SECM system [J]. Electroanalysis, 2012, 24(2): 239
