Bonilla F A, Berkani A, Liu Y, et al. Formation of anodic films on magnesium alloys in an alkaline phosphate electrolyte [J]. J. Electrochem. Soc., 2002, 149B (1): 4
[9]
Bonilla F A, Berkani A, Skeldon P. Enrichment of alloying elements in anodized magnesium alloys[J]. Corros. Sci., 2002, 44(9): 1942
[10]
Zozulin A J, Bartak D E. Anodized coating for magnesium alloys[J]. Met. Finish., 1994, 92(3): 39
[11]
Khaselev O, Weiss D. Structure and composition of anodic films formed on binary Mg-Al alloys in KOH-aluminate solutions under continuous sparking [J]. Corros. Sci., 2001, 43(7): 1295
[12]
Khaselev O, Yahalom J. Constant voltage anoding of Mg-Al alloys in KOH-Al(OH)3 solutions [J]. ZEl Electrochem. Soc., 1998, 145(1): 190
[13]
Khaselev O, Yahalom J. The anodic behavior of binary Mg-Al alloys in KOH-Aluminate solutions [J]. Corros. Sci., 1998, 40(7): 1149
[14]
宋光玲. 镁合金腐蚀与防护 [M]. 北京: 化学工业出版社, 2006
[15]
Ikonopisov S. Electronic conduction of anodized aluminum electrodes [J]. Electrochim. Acta, 1969, 14(8): 761
[16]
Ikonopisov S. Theory of electrical breakdown during formmion of barrier anodic films [J]. Electrochim. Acta, 1977, 22(10): 1077
[17]
Albella J M, Montern I, Martine-Duaft J M. Electron injection and avalanche during the anodic oxidation of tantalum [J]. J. Electrochem. Soc., 1984, 13l(5): 1101
[18]
Axelrod N N, Schwartz N. A symmetric conduction in thin film tantalum/tantalum oxide/metal structures: Interstitial and substitutional impurity effects and direct detection of flaw breakdown [J]. J. Electrochem. Soc., 1969, 116(4): 460
Liang J, Guo B G, Tian J, et al. Effects of NaAlO2 on structure and corrosion resistance of microarc oxidation coatings formed on AM60B magnesium alloy in phosphate-KOH electrolyte [J]. Surf. Coat. Technol., 2005, 199(2-3): 122
Jin F Y, Chu P K, Xu G D, et al. Structure and mechanical properties of magnesium alloy treated by micro-arc discharge oxidation using direct current and high-frequency bipolar pulsing modes [J]. Mater. Sci. Eng., 2006, 435-436: 123
Chang L R, Cao F H, Cai J S, et al. Influence of electric parameters on MAO of AZ91D magnesium alloy using alternative square-wave power source [J]. Trans. Nonferrous Met. Soc. China, 2011, 21(2): 307
Yang Y, Wu H. Effect of current density on corrosion resistance of micro-arc oxide coatings on magnesium alloy [J]. Trans. Nonferrous Met. Soc. China, 2010, 20(2): s688
[33]
Srinivasan P B, Liang J, Blawert C, et al. Effect of current density on the micro-structure and corrosion behaviour of plasma electrolytic oxidation treated AM50 magnesium alloy [J]. Appl. Surf. Sci., 2009, 255(7): 4214
[34]
Shi Z M, Song G L, Atres A. Influence of anodizing current on the corrosion resistance of anodized AZ91D magnesium alloy [J]. Corros. Sci., 2006, 48(8): 1939
[35]
Li L L. Anodization of AZ91 magnesium alloy in alkaline solution containing silicate and corrosion properties of anodized films [J]. Trans. Nonferrous Met. Soc., 2008, 18(3): 724
[36]
Liang J, Hu L T, Hao J C. Improvement of corrosion properties of micro-arc oxidation coating on magnesium alloy by optimizing current density parameters [J]. Appl. Surf. Sci., 2007, 253(16): 6940
Tang Y M, Zhao X H, Jiang K S, et al. The influences of duty cycle on the bonding strength of AZ31B magnesium alloy by micro-arc oxidation treatment [J]. Surf. Coat. Technol., 2010, 205(6): 1789