Nelson T W, Lippold J C, Mills M J. Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds-Part 2: On-cooling transformations [J]. Weld. Res. Suppl., 2000, 79(1):267
[2]
Wu Y, Patchett B M. Formation of crack-susceptible structures of weld overlay of corrosion resistant alloys [J]. Mater. Perform.: Sulphur. Energy, 1992, 32: 83
[3]
Huang J Y, Young M C, Jeng S L, et al. Environmentally assisted cracking behavior of dissimilar metal weldments under high te-mperature water conditions [J]. Mater. Trans., 2008, 49(7): 1667
[4]
Aust K T, Erb U, Palumbo G. Interface control for resistance to intergranular cracking [J]. Mater. Sci. Eng., 1994, A176(1): 329
[5]
Raquet O, Herms E, Vaillant F, et al. SCC of cold-worked austenitic stainless steels in PWR conditions [A]. The 12th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems-water Reactors [C], La Grange Park: ANS, 2005: 1049
[6]
Andresen P L, Morra M M. IGSCC of non-sensitized stainless steels in high temperature water [J]. J. Nucl. Mater., 2008, 383(1): 97
[7]
Alexandreanu B, Chopra O K, Shack W J. The stress corrosion cracking behavior of alloys 690 and 152 WELD in a PWR environment [R]. Argonne National Laboratory (ANL), 2009
[8]
McMinn A, Nelson J L. Stress corrosion cracking experience with existing and potential safe-end materials [A]. Proceedings of 3rd International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—water Reactors [C]. Traverse City, Mic-higan: NACE, 1987: 389
[9]
Jenssen A, Norrgard K, Lagerstrom J, et al. Assessment of cracking in dissimilar metal welds [A]. Proceeding of the 10th International Conference on Environmental Degradation of Materials in Nuclear Power System-water Reactors [C]. Houston: NACE, 2001: 187
[10]
Bamford W H, Hall J. Cracking of alloy 600 nozzle, weld in PWRs: review of cracking events and repair service experience [A]. Proceeding of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power System-water Reactor [C]. Slat Lake City: TMS, 2005: 959
[11]
Bamford W H, Foster J, Hsu K R, et al. Alloy 182 weld crack growth, and its impact on service-induced cracking in operating PWR plant piping [A]. The 10th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-water Reactors [C]. Houston: NACE, 2001: 181
[12]
Bamford W H, Hall J. A review of alloy 600 cracking in operating nuclear plants: historical experience and future trends [A]. Proceeding of the 11th International Conference on Environmental Degradation of Materials in Nuclear Power System-water Reactor [C]. Stevenson: ANS, 2003: 1071
[13]
Park J H, Chopra O K, Natesan K, et al. Boric acid corrosion of light water reactor pressure vessel materials [A]. Proceeding of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power System-water Reactor [C]. Slat Lake City: TMS, 2005: 459
[14]
Scott P M. An overview of materials degradation by stress corrosion in PWRs [J]. Eur. Federat. Corros. Public., 2007, 51: 3
[15]
Harrod D L, Gold R E, Jacko R J. Alloy optimization for PWR steam generator heat-transfer tubing [J]. JOM, 2001, 53(7): 14
Lee H T, Wu J L. Correlation between corrosion resistance properties and thermal cycles experienced by gas tungsten arc welding and laser beam welding alloy 690 butt weldments [J]. Corros. Sci., 2009, 51(4): 733
[18]
Lu B T, Chen Z K, Luo J L, et al. Pitting and stress corrosion cracking behavior in welded austenitic stainless steel [J]. Electrochim. Acta, 2005, 50(6): 1391
[19]
Palumbo G, King P J, Lichtenberger P C, et al. Grain boundary design and control for intergranular stress-corrosion resistance [J]. Scr. Metall. Mater., 1991, 25(8): 1775
[20]
Gertsman V Y, Tangri K, Valiev R Z. On the grain boundary statistics in metals and alloys susceptible to annealing twinning [J]. Acta Metall. Mater., 1994, 42(6): 1785
[21]
Pan Y, Adams B L, Olson T, et al. Grain-boundary structure effects on intergranular stress corrosion cracking of alloy X-750 [J]. Acta Mater., 1996, 44(12): 4685
[22]
Gertsman V Y, Bruemmer S M. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys [J]. Acta Mater., 2001, 49(9): 1589
[23]
Andrensen P L. Crack initiation studies in alloy 690 and weld metals [R]. NRC/EPRI Meeting, 2008
[24]
Andrensen P L. Alloy 690 base metal product forms [R]. NRC/EPRI Meeting, 2008
[25]
Peng Q, Shoji T, Yamauchi H, et al. Intergranular environmentally assisted cracking of alloy 182 weld metal in simulated normal water chemistry of boiling water reactor [J]. Corros. Sci., 2007, 49(6): 2767
[26]
Yamazaki S, Lu Z, Ito Y, et al. The effect of prior deformation on stress corrosion cracking growth rates of alloy 600 materials in a simulated pressurized water reactor primary water [J]. Corros. Sci., 2008, 50(3): 835
[27]
Scott P M, Combrade P. On the mechanism of stress corrosion crack initiation and growth in alloy 600 exposed to PWR primary water [A]. Proceedings of the 11th International Conference on Environmental Degradation Materials Nuclear Power Systems [C]. Stevenson, 2003: 29
[28]
Shoji T, Lu Z P, Yamazaki S. The effect of strain-hardening on PWSCC of nickel-base alloys 600 and 690 [A]. Proceedings of the 14th International Conference on Environmental Degradation Materials Nuclear Power Systems-water Reactors [C]. Virginia Bea-ch: ANS, 2009: 23
[29]
Amzallag C, Boursier J M, Pages C, et al. Stress corrosion life assessment of 182 and 82 welds used in PWR components [A]. The 10th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-water Reactors [C]. Texas: NACE, 2001: 171
[30]
Young B A, McIlree A, King P J. Reduction of toughness results for weld metal 182 in a PWR primary water environment with varying dissolved hydrogen, lithium hydroxide and boric acid concentrations [A]. Proceedings of the 12th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-water Reactors [C]. Slat Lake City: TMS, 2005: 579
[31]
Li G F, Charles E A, Congleton J. Effect of post weld heat treatment on stress corrosion cracking of a low alloy steel to stainless steel transition weld [J]. Corros. Sci., 2001, 43(10): 1963
[32]
Peng Q J, Shoji T, Ritter S, et al. SCC behavior in the transition region of an alloy 182/SA508-2 dissimilar weld joint ender simulated BWR-NWC condition [A]. Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-water Reactors [C]. Slat Lake City: TMS, 2005: 589
[33]
Seifert H P, Ritter S, Shoji T, et al. Environmentally-assisted cracking behaviour in the transition region of an Alloy182/SA 508 Cl. 2 dissimilar metal weld joint in simulated boiling water reactor normal water chemistry environment [J]. J. Nucl. Mater., 2008, 378(2): 197
[34]
Nelson T W, Lippold J C, Mills M J. Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar weld metals, Part 1-Nucleation and growth [J]. Weld. J., 1999, 78: 329
[35]
Yamazaki S, Lu Z, Ito Y, et al. The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water [J]. Corros. Sci., 2008, 50(3): 835
[36]
Chopra O K, Shack W J. Evaluation of effects of LWR coolant environments on fatigue life of carbon and low-alloy steels [J]. ASTM Spec. Technol. Pub., 1997, 1298: 247
[37]
Chopra O K, Shack W J. Overview of fatigue initiation in carbon and low-alloy steels in light water reactor environments [J]. J. Pressure Vessel Technol., 1999, 121(1): 49
[38]
Chopra O K, Shack W J. Low-cycle fatigue of piping and pressure vessel steels in LWR environments [J]. Nucl. Eng. Design, 1998, 184(1): 49
[39]
Kim J W, Lee K, Kim J S, et al. Local mechanical properties of Alloy 82/182 dissimilar weld joint between SA508 Gr. 1a and F316 SS at RT and 320 ℃ [J]. J. Nucl. Mater., 2009, 384(3): 212
[40]
Lu Z P, Sakaguchi K, Negishi K, et al. Quantifying the effects of strain-hardening and water chemistry on crack growth rates of 316L SS welds in high temperature water [A]. The 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-water Reactor [C]. Virginia Beach: ANS, 2009: 15
[41]
Paraventi D J, Moshier W C. The effect of cold work and dissolved hydrogen in the stress corrosion cracking of alloy 82 and alloy 182 weld metal [A]. Proceeding of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power System-water Reactor [C]. Slat Lake City: TMS, 2005: 543
[42]
Hanninen H. Effects of MnS inclusion dissolution on environmentally assisted cracking in low alloy and carbon steels [J]. Corrosion, 1990, 46(7): 563
[43]
Chopra O K, Park H B. Mechanism of fatigue crack initiation in light water reactor coolant environments [R]. Argonne National Lab, 2000
[44]
Ford F P. Quantitative prediction of environmentally assisted cracking [J]. Corrosion, 1996, 52(5): 375
[45]
Vermilyea D A. A theory for the propagation of stress corrosion cracks in metals [J]. J. Electrochem. Soc., 1972, 119(4): 405
[46]
MacDonald D D, MacDonald M U. A coupled environment model for stress corrosion cracking in sensitized type 304 stainless steel in LWR environments [J]. Corros. Sci., 1991, 32(1): 51
[47]
Hanninen H, Toivonen A, Saukkonen T, et al. EAC crack initiation in nickel-based dissimilar metal welds using doped steam test [A]. Proceeding of the 14th International Conference on Environmental Degradation of Materials in Nuclear Power System [C]. Virginia Beach: ANS, 2009: 333
Chopra O K, Shack W J. Effects of LWR coolant environments onfatigue life of reactor materials [A]. NUREG/CR-6909, ANL-06/08 [C]. Washington DC: Nuclear Regulatory Commission, 2007: 7
[51]
Higuchi M, Sakaguchi K, Nomura Y, et al. Final proposal of environmental fatigue life correction factor (F) for structural materials in LWR water environment [A]. Proceedings of 2007 ASME Pressure Vessels and Piping Division Conference [C]. Texas: ASME, 2007: 7
