Mitchell M J. Corrosion under insulation-new approaches to coating and insulation materials [A].Corrosion 2003 [C]. San Diego: NACE, 2003, 03036
[2]
CINI Manual. Insulation for industries [S]. Stichting isolatie nederlandse industrie (CINI). BUSSUM, The Netherlands. 2006
[3]
Williams J, Evans O. The influence of insulation materials on corrosion under insulation [A]. Northern Area Western Conference [C]. Calgary: NACE, 2010, 1
[4]
O'Donoghue M, Datta V P, et al. From trauma to transcendence corrosion under insulation [A]. Northern Area Western Conference[C]. Calgary: NACE, 2010, 6
[5]
Richard N. Select effective pipeline coatings [J]. Hart's Pipeline Digest, 1997, 34(4): 17
[6]
Steely C, Pollock W. A state of the art report of protective coatings for carbon steel and austenitic stainless steel surfaces under thermal insulation and cementitious fireproofing [A]. NACE Publication 6H189 [C]. Houston, NACE, 1989, 2
[7]
Fischer K P, Thomason W H, Rosbrook T, et al. Performance history of thermal-sprayed aluminum coatings in offshore service [J]. Mater. Perform., 1995, 34(4): 27
[8]
Halliday M. Preventing corrosion under insulation-new generation solutions for an age old problem [J]. J. Prot. Coat. Linings, 2007, 24(2): 24
[9]
Kumar M S, Sujata M, Venkataswarmy M A. Failure analysis of a stainless steel pipeline [J]. Failure Anal., 2008, 15(5): 497
[10]
Bruce R. Preventing corrosion under insulation in chemical manufacturing facilities [J]. JPCL, 1998, 5: 40
[11]
Fitzgerald B J, Winnik S. A corrosion under insulation prevention strategy for petrochemical industry piping [J]. Corros. Manag., 2004, 57(1): 15
[12]
Kane R D, Ashbaugh W G, Mcgowan N, et al. New industry standards, test procedures, and surface treatments combat corrosion under insulation [A]. Corrosion Source-2000 Online Symposium [C]. Washington, 2000, 0403
[13]
Norsworthy R, Dunn P J. Corrosion under thermal insulation [J]. Mater. Perform., 2002, 41(9): 38
[14]
Frank D V. Corrosion under insulation [J]. Proc. Safety Prog., 2009, 28(1): 30
[15]
Delahunt J F. Corrosion under thermal insulation and fireproofing an overview [A]. Corrosion 2003 [C]. San Diego: NACE, 2003, 03022
[16]
Goldie B, Kapsanis K. Corrosion under insulation: Basics and resources for understanding [J]. JPCL, 2009, 6: 34
[17]
Kumar M S, Sujata M, Venkataswamy M A, et al. Failure analysis of a stainless steel pipeline [J]. Failure Anal., 2008, 15: 497
[18]
Ali B, Saud A S. Under insulation stress corrosion cracking of proc-ess piping [A]. Corrosion 2006 conference & expo [C]. HT: NACE, 2006, 06500
[19]
NACE RP0198-2004. The control of corrosion under thermal insulation and fireproofing materials—A systems approach [S]. 2004
[20]
Noveiri E, Torfi S. Nano coating application for corrosion reduction in oil and gas transmission pipe: A case study in south of Iran[J]. IJSEI, 2012, 1(2): 104
[21]
Pollock W I, Barnhart J M. Corrosion of metal under thermal insulation. ASTM special technical publication 880 (4th edition) [R]. ASTM, Philadelphia, 1985
[22]
NACE RP0198-1998 The control of corrosion of metals under thermal insulation and fireproofing materials-A systems approach[S]. 1998
[23]
ASTM G189-07. Standard guide for laboratory simulation of corrosion under insulation [S]. 2007
Richert J P. Issues surrounding insulated SS and cracking under thermal insulation-refinery experiences in tropical environments' piping [A]. Corrosion/2003 [C]. San Diego: NACE, 2003, 03026
[26]
Richardson J A, Fitzsimmons T. Use of aluminum foil for prevention of stress corrosion cracking of austenitic stainless steel under thermal insulation [A]. ASTM STP880 [C]. Philadelphia, Pennsylvania: ASTM, 1985, 188
[27]
Lazaar Peter III. Factors affecting corrosion of carbon steel under thermal insulation [A]. Corrosion of Metals Under Thermal Insulation [C]. Philadelphia: American Society for Testing and Materials, 1985, 11
[28]
ASTM C585-10. Standard practice for inner and outer diameters of rigid thermal insulation for nominal sizes of pipe and tubing (NPS System) [S]. 2004
[29]
ASTM C871. Standard test methods for chemical analysis of thermal insulation materials for leachable chloride, Fluoride, Silicate and Sodium Ions [S]. 2004
[30]
ASTM C1617-09. Standard practice for quantitative accelerated laboratory evaluation of extraction solutions containing ions leach-ed from thermal insulation on aqueous corrosion of metals [S]. 2005
[31]
Norsworthy R. Selection and use of coatings for underground or submersion service [M]. Uhlig's Corrosion Handbook, (Third edition), 2011: 985
[32]
Papavinasam S, Attard M, Arseneult B, et al. State-of-the-art of thermal spray coatings for corrosion protection [J]. Corros. Rev., 2008, 26(2/3): 105
[33]
Standard M. Aluminum sprayed coatings on board US navy ships a ten years overview [A]. Thermal Spray: Advances in coatings technology: Pproceedings of the National Thermal Spray Conference [C]. Orlando: Asm Intl, 1988, 389
[34]
周香林, 张济山. 先进冷喷涂技术与应用 [M]. 北京: 机械工业出版社, 2011
[35]
Balani K, Agarwal A, Seal S, et al. Transmission electron microsc-opy of cold sprayed 1100 aluminum coating [J]. Scr. Mater., 2005,53(7): 845
[36]
Choi W B, Li L, Luzin V, et al. Integrated characterization of cold sprayed aluminum coatings [J]. Acta Mater., 2007, 55(3): 857
[37]
Khanna A S. Nanotechnology in high performance paint coatings[J]. Asian J. Exp. Sci., 2008, 21(2): 25
[38]
Chen X H, Chen C S, Xiao H N, et al. Corrosion behavior of carbon nanotubes-Ni composite coating [J]. Surf. Coat. Technol., 2005, 191(2): 351
[39]
Zandi Z R, Verbeken K, Adriaens A. The corrosion resistance of 316L stainless steel coated with a silane hybrid nanocomposite coating [J]. Prog. Org. Coat., 2011, 72(4): 709
[40]
Aglan A, Allie A, Ludwick A, et al. Formulation and evaluation of nano-structured polymeric coatings for corrosion protection [J]. Surf. Coat. Technol., 2007, 202(2): 370
