Nakano M, Nishimoto H, Fujiwara K, et al. Improve- ments of single sheet tester for measurement of 2-D magnetic properties up to high flux density[J]. IEEE Transactions on Magnetics, 1999, 35(5): 3965-3967.
[2]
Zhu J, Zhong J, Lin Z, et al. Measurement of magnetic properties using 3-D magnetic excitations[J]. IEEE Transactions on Magnetics, 2003, 39(5): 3429-3431.
[3]
Li Y, Zhu J, Yang Q, et al. Measurement of SMC material using an improved 3-D tester with flexible excitation coil and novel sensing coils[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1971-1974.
[4]
Yamamoto T, Ohya Y. Single sheet tester for measuring core losses and permeability in a silicon steel sheet[J]. IEEE Transactions on Magnetics, 1974, 10(2): 157-159.
[5]
Moses A J, Hamadeh S. Comparison of the Epstein frame and single strip tester for measuring the power loss of non-oriented electrical steels[J]. IEEE Transac- tions on Magnetics, 1983, 19(6): 2705-2710.
[6]
IEC 60404—2 AMD 1—2008: magnetic materials- Part 2: methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame[S]. 2008.
[7]
IEC 60404—3—2010: Magnetic Materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester[S]. - Edition 2.2; Consolidated Reprint.
[8]
Zhao X, Lu J, Li L, et al. Analysis of the DC bias phenomenon by the harmonic balance finite element method[J]. IEEE Transactions on Power Delivery, 2011, 26(1): 475-485.
[9]
Mthombeni T L, Pillay P, Strnat R M W. New Epstein frame for lamination core loss measurements under high frequencies and high flux densities[J]. IEEE Transactions on Energy Conversion, 2007, 22(3): 614-620.
[10]
Patsios C, Tsampouris E, Beniakar M, et al. Dynamic finite element hysteresis model for iron loss calculation under PWM excitation[J]. IEEE Transactions on Magnetics, 2011, 47(5): 1130-1133.
[11]
Moses A J. Characterisation and performance of electrical steels for power transformers operating under extremes of magnetization conditions[C]. International Colloquium Transformer Research and Asset Manage- ment, Croatia, 2009.
[12]
Cheng Z, Takahashi N, Forghani B, et al. Engineering- oriented benchmarking and application-based magnetic material modeling in transformer research[C]. Interna- tional Colloquium Transformer Research and Asset Management, Croatia, 2012.
Davies D, Moses A J. Causes of some error in measurements in grain-oriented silicon-iron using the Epstein square[J]. Journal of Magnetism and Magnetic Materials, 1982(26): 35-36.
[15]
Sievert J. Recent advances in the one- and two- dimensional magnetic measurement technique for electrical steel sheet[J]. IEEE Transactions on Magnetics, 1990, 26(5): 2553-2558.
[16]
谢德馨, 白保东. 计算电磁学中电工钢片磁特性模型研究的新进展[J]. 沈阳工业大学学报, 2007, 29(03): 289-294. Xie Dexin, Bai Baodong. New development of magnetic property modeling electrical steel sheet in computational electromagnetics[J]. Journal of Shenyang University of Technonlogy, 2007, 29(03): 289-294.
[17]
Fujiwara K, Adachi T, Takahashi N. A proposal of finite-element analysis considering two-dimensional magnetic properties[J]. IEEE Transactions Magnetics, 2002, 38(2): 889-892.
[18]
Enokizono M, Shimoji H, Ikariga A, et al. Vector magnetic characteristic analysis of electrical machines [J]. IEEE Transactions on Magnetics, 2005, 41(5): 2032-2035.
[19]
Cheng Z, Takahashi N, Forghani B, et al. Effect of variation of B-H properties on loss and flux inside silicon steel lamination[J]. IEEE Transactions on Magnetics, 2011, 47(5): 1346-1349.
[20]
Marketos P, Zurek S, Moses A J. Calculation of the mean path length of the Epstein frame under non- sinusoidal excitations using the double Epstein method [J]. Journal of Magnetism and Magnetic Materials, 2008(320): 2542-2545.
[21]
Cheng Z, Takahashi1 N, Forghani B, et al. 3-D finite element modeling and validation of power frequency multi-shielding effect[J]. IEEE Transactions on Magne- tics, 2012, 48(2): 243-246.
[22]
IEEE Std 1597.1 TM —2008: IEEE Standard for Valida- tion of Computational Electromagnetics Computer Modeling and Simulations[S].
[23]
TEAM Benchmark Problems. [Online] available: www.compumag.org/TEAM.
