Sabate J A, Vlatkovic V, Ridley R B, et al. Design considerations for high-voltage high-power full- bridge zero voltage-switched PWM converter[C]. IEEE Applied Power Electronics Conference, 1990: 275-284.
[2]
Mweene L H, Wright C A, Schlecht M F. A 1 kW 500 kHz front-end converter for a distributed power supply system[J]. IEEE Transactions on Power Electronics, 1991, 6(3): 398-407.
[3]
Lin S, Chen C. Analysis and design for RCD clamped snubber used in output rectifier of phase-shift full bridge-bridge ZVS converters[J]. IEEE Transactions on Industrial Electronics, 1998, 45(2): 358-359.
[4]
Sabate J A, Vlatkovic V, Ridley R B, et al. High- voltage, high-power, ZVS, full-bridge PWM converter employing an active snubber[C]. IEEE Applied Power Electronics Conference, 1991: 158-163.
[5]
Cho J G, Rim G H, Lee F C. Zero voltage and zero current switching full bridge PWM converter using secondary active clamp[C]. IEEE Power Electronics Specialist Conference, 1996: 657-663.
[6]
Dudrik J, Spánik P, Trip N D. Zero-voltage and zero-current switching full-bridge DC-DC converter with auxiliary transformer[J]. IEEE Transactions on Power Electronics, 2006, 21(5): 1328-1335.
[7]
Chen T F, Cheng S. A novel zero-voltage zero-current switching full-bridge PWM converter using improved secondary active clamp[C]. IEEE International Symposium on Industrial Electronics, 2006: 1683-1687.
Sun T C, Guo J H, Wang H J, et al. Improved full-bridge ZVZCS PWM DC/DC converter using voltage clamping[J]. Transactions of China Electrote- chnical Society, 2007, 22(7): 47-51.
[10]
Dudrik J, Spánik P, Trip N D. Soft-Switching PS-PWM DC-DC converter for full-load range applications[J]. IEEE Transactions on Power Electronics, 2010, 57(8): 2807-2814.
[11]
Kim E S, Joe K Y, Kye M H, et al. An improved soft switching PWM FB DC/DC converter for reducing conduction losses[J]. IEEE Transactions on Power Electronics, 1999, 14(2): 258-264.
[12]
Park K B, Kim C E, Moon G W, et al. Voltage oscillation reduction techniques for phase-shift full- bridge converter[J]. IEEE Transactions on Industrial Electronics, 2007, 54(5): 2779-2790.
Chen Wu, Ruan X B, Zhang R R. ZVS PWM full-bridge converter with reset winding[J], Transac- tions of China Electrotechnical Society, 2007, 22(11): 117-124.
Sun T C, Wang H J, Zhang X G, et al. A novel ZVZCS converter using passive clamp circuit[J], Proceedings of the CSEE, 2006, 26(17): 72-76
[17]
Ting S T, Nianci H. A novel zero voltage and zero current switching full bridge PWM converter[C]. IEEE Applied Power Electronics Conference, 2003: 1088-1092.
[18]
Song T T, Huang N. A novel zero-voltage and zero current switching full-bridge PWM converter[J]. IEEE Transactions on Power Electronics, 2005, 20(2): 286-291.
[19]
Song T T, Huang N C, Ioinovici A. A family of zero-voltage and zero-current-switching three-level DC-DC converters with secondary-assisted regen- erative passive snubber[J]. IEEE Transactions on Circuits and Systems, 2005, 52(11): 2473-2481.
[20]
Wu X, Xie X, Zhang J, et al. Soft switched full bridge DC-DC converter with reduced circulating loss and filter requirement[J]. IEEE Transactions on Power Electronics, 2007, 22(5): 1949-1955.
[21]
Wu X, Xie X, Zhao C, et al. Low voltage and current stress ZVZCS full bridge DC-DC converter using center tapped rectifier reset[J]. IEEE Transactions on Industrial Electronics, 2008, 55(3): 1470-1477.
[22]
Cho J G, Baek J W, Jeong C Y, et al. Novel zero-voltage and zero-current-switching full-bridge PWM converter using a simple auxiliary circuit[J]. IEEE Transactions on Industrial Applications, 1999, 35(1): 15-20.
[23]
Bendre A, Norris S, Divan D, et al. New high power DC-DC converter with loss limited switching and lossless secondary clamp[J]. IEEE Transactions on Power Electronics, 2003, 18(4): 1020-1027.
[24]
Bendre A, Wallace I, Luckjiff G A, et al. Design considerations for a soft-switched modular 2. 4-MVA medium-voltage drive[J]. IEEE Transactions on Power Electronics, 2002, 38(5): 1400-1411.
[25]
Bendre A, Venkataramanan G, Divan D. Dynamic analysis of loss-limited switching full-bridge DC-DC converter with multimodal control[J]. IEEE Transa- ctions on Power Electronics, 2003, 39(3): 854-863.
[26]
Cha H Y, Chen L H, Ding R J, et al. An alternative energy recovery clamp circuit for full-bridge PWM converters with wide ranges of input voltage[J]. IEEE Transactions on Power Electronics, 2008, 23(6): 2828-2837.
