Redl R, Sokal N O, Balogh L. A novel soft-switching full-bridge dc/dc converter: analysis, design considerations, and experimental results at 1.5 kW, 100 kHz[C]. Proceedings of IEEE PESC, 1990: 162-172.
[2]
Sabate J A, Vlatkovic V, Ridley R B, et al. High-voltage, high-power, ZVS, full-bridge PWM converter employing an active snubber[C]. Proceed- ings of IEEE APEC, 1991: 158-163.
[3]
Stabate J A, Vlatkovic V, Ridley R B, et al. Design considerations for high-voltage high-power full- bridge zero-voltage-switching PWM converter[J]. IEEE Trans. on Power Electron., 1990, 16(2): 275- 284.
[4]
Watson R, Lee F C. Analysis, design, and experimental results of a 1kW ZVS-FB-PWM converter employing magamp secondary side control[C]. Proceedings of Virginia Power Electronics Center Seminar, 1993: 207-212.
[5]
Borage M, Tiwari S, Kotaiah S. A passive auxiliary circuit achieves zero-voltage-switching in full-bridge converter over entire conversion range[J]. IEEE Trans. on Power Electron. Letter, 2005, 3(4): 141-143.
[6]
www.energystar.gov
[7]
Dalal D B. A 500 kHz multi-output converter with zero voltage switching[C]. Proceedings of IEEE APEC, 1990: 265-274.
[8]
Chen W, Lee F C, Jovanovic M M. A comparative study of a class of full bridge zero-voltage-switched PWM converters[C]. Proceedings of IEEE APEC, 1995: 893- 899.
[9]
Cho J G, stabate J A, Lee F C. Novel full-bridge zero-voltage-transition PWM dc/dc converter for high power application[C]. Proceedings of IEEE APEC, 1994: 166- 172.
[10]
Jain P K, Kang W, Soin H, et al. Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology[J]. IEEE Trans. on Power Electron., 2002, 17(5): 649-657.
[11]
Jang Y, Jovanovic M M. A new family of full-bridge ZVS converters[J]. IEEE Trans. on Power Electron., 2004, 19(3): 701-707.
[12]
Jang Y, Jovanovic M M. A new PWM ZVS full-bridge converter[J]. IEEE Trans. on Power Electron., 2007, 22(3): 987-994.
