Kano Y, Matsui N. A design approach for direct-drive permanent-magnet motors[J]. IEEE Transactions on Industry Applications, 2008, 44(2): 543-554.
[2]
Ando K, Yamada A, Miki I, et al. Study on improvement of efficiency for outer rotor type of interior permanent magnet synchronous motor[C]. International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2008: 599-602.
[3]
Florence Libert. Design, optimization and comparison of permanent magnet motors for a low-speed direct driven mixer[D]. Stockholm: Royal of Institute of Technology, 2004.
[4]
Mohammad S Islam, Mir S, Sebastian T. Issues in reducing the cogging torque of mass-produced permanent magnet brushless DC motor[J]. IEEE Transactions on Industry Applications, 2004, 40(3): 813-820.
Fujishiro S, Ishikawa K, Kikuchi S, et al. Design of outer-rotor-type multipolar switched reluctance motor for electric vehicle[J]. Journal of Applied Physics, 2006, 99(8): 324-326.
Štumberger B, Štumberger G, Hadziselimovic M, et al. High-performance permanent magnet brushless motors with balanced concentrated windings and similar slot and pole numbers[J]. Journal of Magnetism and Magnetic Materials, 2006, 304(2): e829-e831.
Ishak D, Zhu Z Q, Howe D. Permanent-magnet brushless machines with unequal tooth widths and similar slot and pole numbers[J]. IEEE Transactions on Industry Applications, 2005, 41(2): 584-590.
[13]
Zhu Z Q, Howe D. Influnce of design parameters on cogging torque in permanent magnet machines[J]. IEE Transactions on Energy Conversion, 2000, 15(4): 407-412.
[14]
陈世坤. 电机设计[M]. 北京: 机械工业出版社, 2000.
[15]
Hwang S M, Eom J B, Jung Y H, et al. Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motors[J]. IEEE Transactions on Magnetics, 2001, 37(4): 2806-2809.
