Jang J H, Ha J I, Ohto M, et al. Analysis of permanent-magnet machine for sensorless control based on high-frequency signal injection[J]. IEEE Transactions on Industry Applications, 2004, 40(6): 1595-1604.
Oyama J, Higuchi T, Abe T, et al. Position sensorless control of IPM motor using PWM inverter carrier frequency component[J]. Transactions of the Institute of Electrical Engineers of Japan D, 2002, 122(5): 509-515.
[6]
Mamo M, Ide K, Sawamura M, et al. Novel rotor position extraction based on carrier frequency component method (CFCM) using two reference frames for IPM drives[J]. IEEE Transactions on Industrial Electronics, 2005, 52(2): 508-514.
[7]
Ching Tsai Pan, Shinn Ming Sue. A linear maximum torque per ampere control for IPMSM drives over full-speed range[J]. IEEE Transactions on Energy Conversion, 2005, 20(2): 359-366.
[8]
Han Y S, Choi J S, Kim Y S. Sensorless PMSM drive with a sliding mode control based adaptive speed and stator resistance estimator[J]. IEEE Transactions on Magnetics, 2000, 36(5): 3588-3591.
[9]
Kim H, Huh K K, Lorenz R D, et al. A novel method for initial rotor position estimation for IPM synchronous machine drives[J]. IEEE Transactions on Industry Applications. 2004, 40(5): 1369-1378
[10]
Jeong Y S, Lorenz R D, Jahns T M, et al. Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methods[J]. IEEE Transactions on Industry Appl- ications, 2005, 41(1): 38-45.
[11]
Mamo M, Oyama J, Abe T, et al. Principle of sensor elimination in interior permanent magnet motors[J]. Journal of the Japan Society of Applied Electromagnetics, 1998, 6(2): 144-150.
[12]
Mamo M, Oyama J, Abe T, et al. Carrier frequency component method for position sensorless control of IPM motor in lower speed range[J]. Transactions of the Institute of Electrical Engineers of Japan D, 2000, 120-D(2): 275-280.
