Liu L, Cartes D, Liu W X. Application of particle swarm optimization to PMSM stator fault diagnosis [C]. International Joint Conference on Neural Networks, Vancouver, 2006: 1969-1974.
[2]
Quiroga J, Cartes D A, Edrington C S, et al. Neutral network based fault detection of PMSM stator winding short under load fluctuation[C]. International Power Electronics and Motion Control Conference, Poznan, 2008: 793-798.
[3]
Roser J, Espionsa A J, Cuside J, et al. Simulation and fault detection of short circuit winding in a permanent magnet synchronous machine by means of Fourier and wavelet transform[C]. 2008 IEEE International Instrumentation and Measurement Technology Conference, Victoria, 2008: 411-416.
[4]
Romeral L, Urresty J C, Riba Ruiz J R, et al. Modeling of surface-mounted permanent magnet synchronous motors with stator winding interturn faults[J]. IEEE Transactions on Industry Applications, 2011, 58(5): 1576-1585.
[5]
Cheng S W, Zhang P J, Habetler T G. An impedance identification approach to sensitive detection and location of stator turn-to-turn faults in a closed-loop multiple motor drive[J]. IEEE Transactions on Industry Applications, 2011, 58(5): 1545-1554.
[6]
Hong J, Hyun D, Lee S B, et al. Automated monitoring of magnet synchronous motors at standstill[J]. IEEE Transactions on Industry Applica- tions, 2010, 46(4): 1397-1405.
[7]
Hong J, Lee S B, Kral C, et al. Detection of airgap eccentricity for permanent magnet synchronous motors based on the d-axis inductance[J]. IEEE Transactions on Power Electronics, 2012, 27(5): 2605-2612.
[8]
Le Roux W, Harley R G, Habetler T G. Detecting rotor faults in low power permanent magnet synchronous machines[J]. IEEE Transactions on Power Electronics, 2007, 22(1): 322-328.
[9]
Sebastian T. Temperature effects on torque production and efficiency of PM motors using NdFeB magnets[J], IEEE Transactions on Industry Applications, 1995, 31(2): 353-357.
[10]
唐任远. 现代永磁电机-理论与设计[M]. 北京: 机械工业出版社, 1997.
[11]
Jung J W, Lee S H, Hong J P et al. Optimum design for eddy current reduction in permanent magnet to prevent irreversible demagnetization[C]. International Conference on Electrical Machines and Systems, Seoul, 2007: 949-954.
[12]
Hendershot J R, Miller T J E. Design of brushless permanent magnet motors[M]. Magna Physics Publishing & Oxford Science Publication, USA, 1994.
[13]
Pal S K. Direct drive high energy permanent magnet brush and brushless DC Motors for robotic application[C]. Proceedings of the IEEE Colloquium on Rotor Actuators, London, 1991: 1-4.
[14]
Cheng C W, Man H C, Cheng F T. Magnetic and corrosion characteristics of NdFeB magnet with various surface coatings[J]. IEEE Transactions on Magnetics, 1997, 33(5): 3910-3912.
[15]
Ruschetti C, Bossio G, De Angelo C, et al. Effects of partial rotor demagnetization on permanent magnet synchronous machines[C]. International Conference on Industrial Technology, Vina del Mar, 2010: 1233-1238.
[16]
Kim K C, Lim S B, Koo D H, et al. The shape design of permanent magnet for permanent magnet synchronous motor considering partial demagnetization[J]. IEEE Transactions on Magnetics, 2006, 42(10): 3485-3487.
[17]
Hong H, Yoo J. Shape design of the surface mounted permanent magnet in a synchronous machine[J]. IEEE Transactions on Magnetics, 2011, 47(8): 2109-2117.
[18]
Jang S M, Park H L, Choi J Y, et al. Magnet pole shape design of permanent magnet machine for minimization of torque ripple based on electromagnetic field thirty[J]. IEEE Transactions on Magnetics, 2011, 47(10): 3586-3589.
[19]
Kioumarsi A, Moallem M, Fahimi B. Mitigation of torque ripple in interior permanent magnet motors by optimal shape design[J]. IEEE Transactions on Magnetics, 2006, 42(11): 3706-3711.
[20]
Kang G H, Hur J, Kim W B, et al. The shape design of interior type permanent magnet BLDC motor for minimization of mechanical vibration[C]. IEEE Energy Conversion Congress and Exposition, San Jose, 2009: 2409-2414.
[21]
Kiyoumaris A, Moallem M. Optimal shape design of interior permanent-magnet synchronous motor[C]. IEEE International Conference on Electric Machines and Drives, San Antonio, 2005: 642-648.
[22]
Yang Y H, Wu C J. Study of anti-demagnetization property for a flux-shunt magnet DC motor[C]. IEEE International Conference on Industrial Technology, Vina del, Mar, 2010: 422-426.
[23]
Xing J Q, Wang F X, Wang T Y, et al. Study on anti-demagnetization of magnet for high speed permanent magnet machine[J]. IEEE Transactions on Applied Superconductivity, 2010, 20(3): 856-860.
[24]
IEC 62. 2-2004, IEEE guide for diagnostic field testing of electric power apparatus-electrical machinery[S]. 2004.
[25]
Riba Ruiz J R, Rosero J A, Garcia E, et al. Detection of demagnetization faults in permanent magnet synchronous motors under non-stationary conditions [J]. IEEE Transactions on Magnetics, 2009, 45(7): 2961-2969.
[26]
Liu L. Robust fault detection and diagnosis for permanent magnet synchronous motors[D]. Florida: florida state university, 2006.
[27]
Urresty J, Riba J, Saavedra H, et al. Analysis of demagnetization faults in surface-mounted permanent magnet synchronous motors with symmetric windings[C]. 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, Bologna, 2011: 240-245.
[28]
Kang G H, Hur J, Nam H, et al. Analysis of irreversible magnet demagnetization in line-start motors based on the finite element method[J]. IEEE Transactions on Magnetics, 2003, 39(3): 1488-1491.
[29]
Hosoi T, Watanabe H, Shima K, et al. Demagnetization analysis of additional permanent magnet in salient-pole synchronous machines with damper bars under sudden short circuit[J]. IEEE Transactions on Industrial Electronics, 2012, 59(6): 2448-2456.
[30]
Zhao G X, Tian L J, Shen Q P, et al. Demagnetization analysis of permanent magnet synchronous machines under short circuit fault[C]. Asia-Pacific Power and Energy Engineering Conference, Chengdu, 2010: 1-4.
[31]
Kim K C, Kim K, Kim H J, et al. Demagnetization analysis of permanent magnets according to rotor types of interior permanent magnet synchronous motor[J]. IEEE Transactions on Magnetics, 2009, 45(6): 2799-2802.
[32]
Ruoho S, Kolehmainen J, Arkkio A, et al. Interdependence of demagnetization, loading, and temperature rise in a permanent magnet synchronous motor[J]. IEEE Transactions on Magnetics, 2010, 46(3): 949-953.
[33]
Kim K C, Lim S B, Lee J. The effect on partial demagnetization of permanent magnet synchronous motor for hybrid electric vehicle[C]. 12th Biennial IEEE Conference on Electromagnetic Field Computation, Miami, 2006: 68-68.
[34]
Khoobroo A, Fahimi B, Pekarek S D. A new field reconstruction method for permanent magnet synchronous machines[C]. 34th Annual Conference of the IEEE Industrial Electronics Society, Orlando, 2008: 2009-2013.
[35]
Khoobroo A, Fahimi B. A new method of fault detection and treatment in five phase permanent magnet synchronous machine using field reconstruction method[C]. 2009 IEEE International Electrical Machines and Drives Conference, Miami, 2009: 682-688.
[36]
Khoobroo A, Fahimi B. A novel method for permanent magnet demagnetization fault detection and treatment in permanent magnet synchronous machines[C]. 25th Annual of Applied Power Electronics Conference and Exposition, Palm Springs, 2010: 2231-2237.
[37]
Zhu W D, Fahimi B, Pekarek S. A field reconstruction method for optimal excitation of permanent magnet synchronous machines[J]. IEEE Transactions on Energy Conversion, 2006, 21(2): 305-313.
Xiao Xi, Zhang Meng, Li Yongdong. On-line estimation of permanent-magnet flux linkage ripple for PMSM[J]. Proceedings of the CSEE, 2007, 27(24): 44-47.
Wen Chuanbo, Qi Liang. On-line detection method of magnet flux linkage for permanent magnet synchronous motor[J]. Proceeding of the CSU-EPSA, 2010, 22(2).
[42]
Rosero J A, Romeral L, Ortega J A, et al. Demagnetization fault detection by means of Hilbert-Huang transforms of the stator current decomposition in PMSM[C]. 2008 IEEE International Symposium on Industrial Electronics, Cambridge, 2008: 172-177.
[43]
Resero J A, Cusido. J, Garcia A, et al. Study on the permanent magnet demagnetization fault in permanent magnet synchronous machines[C]. 32nd Annual Conference on IEEE Industrial Electronics, Pairs, 2006: 879-884.
[44]
Casadei D, Filippetti F, Rossi C, et al. Magnets fault characterization for permanent magnet synchronous motors[C]. 2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Cargese, 2009: 1-6.
[45]
Urresty J C, Riba J R, Delgado M, et al. Detection of demagnetization faults in surface mounted permanent magnet synchronous motors by means of the zero-sequence voltage component[J]. IEEE Transactions on Energy Conversion, 2012, 27(1): 42-51.
[46]
Torregrossa D, Khoobroo A, Fahimi B. Prediction of acoustic noise and torque pulsation in PM synchronous machines with static eccentricity and partial demagnetization using field reconstruction method[J]. IEEE Transactions on Industrial Electronics, 2012, 59(2): 934-944.
[47]
Espinosa A G, Rosero J, Cusido J, et al. Fault detection by means of Hilbert-Huang transform of the stator current in a PMSM with demagnetization[J]. IEEE Transactions on Energy Conversion. 2010, 25(2): 312-318.
[48]
Rezig A, Mekedeche M R, Djerdir A. Effect of rotor eccentricity faults on noise generation in permanent magnet synchronous motors[J]. Progress in Electromagnetics Research C. 2010, 15: 117-132.
[49]
Briz F, Degner M, Garcia W, et al. High-frequency carrier-signal voltage selection for stator winding fault diagnosis in inverter-fed AC machines[J]. IEEE Transactions on Industrial Electronics, 2008, 55(12): 4181-4190.
[50]
Briz F, Degner M W, Diez A B, et al. Online diagnostics in inverter-fed induction machines using high-frequency signal injection[J]. IEEE Transactions on Industry Applications, 2004, 40(4): 1153-1161.
[51]
Hong J, Hyun D, Kang T J, et al. Detection and classification of rotor demagnetization and eccentricity faults for PM motors[C]. 3rd Annual IEEE Conversion Congress and Exposition, Phoenix, 2011: 2512-2519.
