Muetze A, Andreas Binder. Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems [J]. IEEE Transactions on Industry Applications, 2007, 43(3): 665-672.
[2]
Muetze A, Tamminen J, Ahola J. Influence of motor operating parameters on discharge bearing current activity[C]. Energy Conversion Congress and Exposition (ECCE), 2010: 2739-2746.
[3]
Magdun O, Binder A. Calculation of roller and ball bearing capacitances and prediction of EDM currents [C]. 35th Annual Conference of IEEE on Industrial Electronics, 2009: 1051-1056.
[4]
David Hyypio. Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression[J]. IEEE Transactions on Industry Applications, 2005, 41(2): 576-584.
[5]
Busse D, Erdman J, Kerkman R, et al. Systemelectrical parameters and their influence effect on bearing currents[J]. IEEE Transactions on Industry Applications, 1997, 33(2): 577-584.
[6]
Rajendra N, Thomas A, Nondahl, Michael J, et al. Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives[J]. IEEE Transactions on Industry Applications, 2003, 39(5): 1294-1299.
[7]
Doyle Busse, Jay Erdman, Russel J Kerkman, et al. Bearing currents and their relationship to PWM drives[J]. IEEE Transactionson Power Electronics, 1997, 12(2): 243-252.
[8]
Chen S, LipoT A, Fitzgerald D. Modeling of bearing currents in inverter drives[J]. IEEE Transactions on Industry Applications, 1995, 32(6): 1365-1370.
[9]
万健如,禹华军. 变频电机轴承失效机理分析[J]. 轴承,2002(8): 24-27.
[10]
Wan Jianru, Yu Huajun. Failure mechanism of motor bearings in the frequency conversion driving system [J]. Bearing, 2002(8): 24-27.
Huang Lipei, Pu Zhiyong. Effects of large capacity PWM inverter on AC motor bearing currents and shaft voltages[J]. Advanced Technology of Electrical Engineering and Energy, 2000(4): 39-43.
Xing Shancheng, Wu Zhengguo. Circulating type motor bearing current in PWM inverter drives[J]. Journal of Naval University of Engineering, 2006, 18(2): 64-68.
Liu Xin, Sun Li, Sun Yaxiu. Research on induction motor shaft voltage and shaft current in PWM drive system[J]. Micromotors Servo Technique, 2007(9): 5-8.
Wang Shihuai, XiongWanli, Duan Zhishan. Investiga- tion on motor bearing electromagnetism damage induced by PWM inverters[J]. Electric Power Science and Engineering, 2004(3): 5-8.
[19]
Muetze A, Oh H W. Application of static charge dissipation to mitigate electric discharge bearing currents[J]. IEEE Transactions on Industry Applications, 2008, 44(1): 135-143.
