钟玉林, 赵争鸣. 改进式SHEPWM对三电平变频器系统的共模电压和轴电压的抑制作用[J]. 电工技术学报, 2009, 24(6): 48-55. Zhong Yulin, Zhao Zhengming. Common mode voltage and shaft voltage suppression on a three-level NPC inverter system applying improved SHEPWM[J]. Transactions of China Electrotechnical Society, 2009, 24(6): 48-55.
[2]
孟进, 马伟明, 张磊, 等. 考虑PWM调制策略的逆变器共模和差模干扰源模型[J]. 电工技术学报, 2007, 22(12): 92-97. Meng Jin, Ma Weiming, Zhang Lei,et al. DM and CM EMI sources modeling for inverters considering the PWM strategies[J]. Transactions of China Electrotech- nical Society, 2007, 22(12): 92-97.
[3]
高强, 徐殿国. PWM逆变器输出端共模与差模电压d v /d t 滤波器设计[J]. 电工技术学报, 2007, 22(1): 79-84. Gao Qiang, Xu Dianguo. Design of common-mode and differential-mode voltage dv/dt filter at PWM inverter output terminals[J]. Transactions of China Electrotechnical Society, 2007, 22(1): 79-84.
[4]
袁佳歆, 潘建兵, 饶斌斌, 等. 三相逆变器的最小共模电压PWM控制[J]. 电工技术学报, 2012, 27(8): 42-48. Yuan Jiaxin, Pan Jianbing, Rao Binbin, et al. Research on minimum common-mode voltage PWM control strategy for three-phase inverters[J]. Transactions of China Electrotechnical Society, 2012, 27(8): 42-48.
[5]
Chen S, Lipo T A, Fitzgerald D. Modeling of motor bearing currents in PWM inverter drives[J]. IEEE Transactions on Industry Applications, 1995, 32(6): 388-393.
[6]
Muetze A, Binder A. Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC motors up to 500kW[J]. IEEE Transactions on Industrial Electronics, 2007, 54(3): 1614-1622.
[7]
Busse D F, Erdman J M, Kerkman R J. The effects of PWM voltage source inverters on the mechanical performance of rolling bearings[J]. IEEE Transactions on Industry Applications, 1997, 33(2): 250-259.
[8]
Erdman J M, Kerkman R J, Schlegel D W. Effect of PWM inverters on AC motor bearing currents and shaft voltages[J]. IEEE Transactions on Industry Applications, 1996, 32(2): 250-259.
[9]
Busse D F, Erdman J M, Kerkman R J. Bearing currents and their relationship to PWM drive[J]. IEEE Transactions on Power Electronics, l997, 12(2): 243-252.
[10]
Wang S. Development of theoretical contact width formulas and a numerical model for curved rough surfaces[J]. Journal of Tribology Transactions of the ASME, 2004, 129(4): 735-742.
[11]
Marc Carpino, Gita Talmage. Minimum film thickness in a gas foil journal bearing with an unbalanced rotor[J]. Tribology Transactions, 2010, 53(3): 433-439.
[12]
Kataoka Takumi, Kikuchi Takashi, Ashihara, et al. Measurement of oil film thickness in the main bearings of an operating engine using thin-film electrode[C]. SAE Technical Papers, 2011.
[13]
Zhang Jie, Drinkwater B W, Dwyer Joyce R S. Acoustic measurement of lubricant-film thickness distribution in ball bearings[J]. Journal of the Acoustical Society of America, 2006, 119(2): 63-71.
[14]
Muetze A, Binder A. Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems[J]. IEEE Transactions on Industry Applications, 2007, 43(3): 665-672.