全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

一种大力矩大位移微纳压电致动器的瞬态响应

, PP. 128-133

Keywords: 压电叠堆,位移放大,致动器,瞬态特性

Full-Text   Cite this paper   Add to My Lib

Abstract:

基于三角放大原理,利用压电叠堆设计并制造了一种具有高精度大力矩、大位移的致动器,并对其动静态特性进行测试分析。文中还采用Ansys、Matlab软件以及动态投影栅线法,从理论和实测两个方面对该致动器在加载电压和撤除电压时的瞬态响应特性进行了分析和测试,理论分析和实测结果吻合度较高。该压电致动器在通入激励电压时,响应速度快,电压-位移的线性度好;在撤除激励电压时,响应特性过程平稳。为该致动器广泛运用于微纳控制系统中,成为微纳系统中可靠、快速的大位移大力矩驱动部件的应用前景提供了依据。

References

[1]  Li Cheng, Zhang Chengjin, Guilin Zhang. High-speed and Large-range scanning control of a piezoelectric stack actuated platform[C]. Proceedings of the 8th World Congress on Intelligent Control and Automation, Jinan, China, 2010: 5523-5527.
[2]  Li Yangmin, Xu Qingsong. Development and assess- ment of a novel decoupled xy parallel microposi- tioning platform[J]. IEEE/ASME Transactions on Mechatronics, 2010, 15(1): 125-135.
[3]  孙宝玉. 柔性压电式微位移机构动态特性的实验研究[J]. 微细加工技术, 2008(2): 33-36. Sun Baoyu. Experimental research on dynamic charate- ristic of flexible micrro-displacement mechanism based on piezoelectric actuator[J]. Micro Fabrication Tech- nology, 2008(2): 33-36.
[4]  杜习波, 陈西平, 张斌, 等. 基于三角原理的压电驱动微位移定位机构的设计与分析[J]. 航空精密制造技术, 2009, 45(6): 10-12. Du Xibo, Chen Xiping, Zhang Bin, et al. Design and analysis of micro-displacement mechanism for motion position with piezo-actuator based on triangle prinple [J]. Aviation Precision Manufacturing Technology, 2009(6): 10-12.
[5]  刘登云, 杨志刚, 程光明, 等. 压电叠堆泵微位移放大机构的试验研究[J]. 机械与电子, 2007(3): 75-77. Liu Dengyun, Yang Zhigang, Cheng Guangming, et al. Study on a micro- displacement magnifying mechanism used on piezo-stack pump[J]. Machinery & Electronics, 2007, 3: 75-77.
[6]  Li Wanquan, Gao Changyin. Design and modeling of micro-displacement amplifying mechanism using revolute joints and flexible hinges[C]. International Conference on Intelligent Computation Technology and Automation, 2010: 1147-1150.
[7]  Sebastian Polit, Dong Jingyan. Development of a high- bandwidth xy nanopositioning stage for high-rate micro-nanomanufacturing[J]. IEEE/ASME Transac- tions on Mechatronics, 2011, 16(4): 724-733.
[8]  Xu Qingsong, Li Yangmin, Xi Ning. Design, fabrica- tion, and visual servo control of an xy parallel micro- manipulator with piezo-actuation[J]. IEEE Transactions on Automation Science and Engineering, 2009, 6(4): 710-719 .
[9]  徐志科, 鄢珂, 金龙. 一种正交型压电位移放大机构的研究[J]. 压电与声光, 2009, 31(2): 207-212. Xu Zhike, Yan Ke, Jin Long. Research of orthoconal micro-displacement amplifier with piezoelectric actuator [J]. Piezo electectrics & Acoustooptics, 2009, 31(2): 207-212.
[10]  Tao Shuai. Theoretical and test study on piezoelectric actuator based on micro-vibration isolation plate[J]. Master paper, OEC, 2008.
[11]  杜平安, 甘娥忠, 于压婷. 有限元-原理、建模及应用[M]. 北京: 国防工业出版社, 2011.
[12]  Kemao Q. Two-dimensional windowed Fourier trans- form for fringe pattern analysis: principles, applica- tions and implementations[J]. Optics and Lasers in Engineering, 2007(45): 304-317.
[13]  史红健, 朱飞鹏, 何小元. 动态投影栅线的加窗傅里叶分析方法[J]. 东南大学学报(自然科学版), 2010, 40(2): 409-413. Shi Hongjian, Zhu Feipeng, He Xiaoyuan. Windowed Fourier analysis for dynamic fringe projection[J]. Journal of Southeast University (Natural Science Edition), 2010, 40(2): 409-413.
[14]  Duan Cunli, Zhang Sujuan, He Xiaofeng. Research of three-dimensional surface detection method based on grating projection[C]. International Conference on Electronics and Optoelectronics (ICEOE 2011), 2011, 2: 335-338.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133