Abele E, Altintas Y, Brecher C. Machine tool spindle units[J]. CIRP Annals-Manufacturing Technology, 2010, 59(2): 781-802.
[2]
Lü Lang, Xiong Wanli, Yuan Julong. Optimization design of electrical and magnetic characteristics of an ultra-precision machine tool motorized spindle[J]. Advanced Materials Research, 2009, 69-70: 258-264.
[3]
Saidur R. A review on electrical motors energy and energy savings[J]. Renewable and Sustainable Energy Reviews, 2010, 14: 877-898.
[4]
Stumberger B, Hamler A, Gorican V, et al. Accuracy of iron loss estimation in induction motors by using different iron loss models[J]. Journal of Magnetism and Magnetic Materials, 2004, 272-276: 1723-1725.
[5]
Zhu Z Q, Ng K, Schofield N, et al. Improved analytical modeling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets[J]. IEE Proceedings on Electric Power Applications, 2004, 151(6): 641-650.
[6]
黄平林, 胡虔生, 崔杨, 等. PWM逆变器供电条件下电机铁心损耗的解析计算[J]. 中国电机工程学报, 2007, 27(12): 19-23. Huang Pinglin, Hu Qiansheng, Cui Yang, et al. Analytical calculation of the iron losses of electric machine fed by PWM inverter[J]. Proceedings of the CSEE, 2007, 27(12): 19-23.
[7]
熊万里, 阳雪兵, 吕浪, 等. 液体动静压电主轴关键技术综述[J]. 机械工程学报, 2009, 45(9): 1-18. Xiong Wanli, Yang Xuebing, Lü Lang, et al. Review on key technology of hydrodynamic and hydrostatic high-frequency motor spindles[J]. Journal of Mechanical Engineering, 2009, 45(9): 1-18.
[8]
Marian P K, Frede B, Ramu K. Control in power electronics[M]. California & London: Academic Press, 2003.
[9]
Boglietti A, Ferraris P, Lazzari M, et al. Influence of the inverter Characteristics on the iron losses in PWM inverter-fed induction motors[J]. IEEE Transactions on Industry Applications, 1996, 32(5): 1190-1194.
[10]
Boglietti A, Cavagnino A, Lazzari M, et al. Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach[J]. IEEE Transactions on Magnetic, 2003, 39(2): 981-989.
[11]
方瑞明, 马宏忠. 高速变频电机仿真中硅钢片材料特性预测研究[J]. 微特电机, 2004, 32(3): 9-11. Fang Ruiming, Ma Hongzhong. Prediction of perfor- mance of silicon steel sheet in simulation of high- speed variable frequency induction motor[J]. Small & Special Electrical Machines, 2004, 32(3): 9-11.