Wang Dong,Ma Weiming,Guo Yunjun,et al.Modeling of multiphase induction motor with non-sinusoidal supply[J].Transactions of China Electrotechnical Society,2010,25(2):6-14.
[4]
EL-Refaie A M.Fractional-slot concentrated windings synchronous permanent magnet machines:opportunities and challenges[J].IEEE Transaction on Industry Applications,2010,57(1):107-121.
Guo Siyuan,Zhou Libing,Qi Ge.Analytical calculation of electromagnetic performance in dual three-phase permanent magnet brushless AC machines[J].Transactions of China Electrotechnical Society,2014,29(5):17-28.
Tang Jun,Wang Tiecheng,Cui Shumei.Implementation method of SVPWM for five-phase inverters[J].Transactions of China Electrotechnical Society,2013,28(7):64-72.
[9]
Bianchi N,Dai Pré M,Alberti L,et al.Theory and design of fractional-slot PM machines[M].Padova,Italy:CLEUP,2007.
[10]
Valavi M,Nysveen A,Nilssen R,et al.Influence of pole and slot combinations on magnetic forces and vibration in low-speed PM wind generators[J].IEEE Transactions on Magnetics,2014,50(5):1-11.
Fang Cheng,Xu Haiping,Xue Shaoshen,et al.Torque ripple and loss of direct-drive multi-phase permanent magnet synchronous machines[J].Transactions of China Electrotechnical Society,2014,29(5):149-159.
Fang Cheng,Xu Haiping,Xue Shaoshen,et al.Analysis of stator MMF and air gap flux density characteristics of direct-drive multi-phase permanent magnet synchronous machines[J].Proceedings of the CSEE,2013,33(24):106-113.
Zhao Pinzhi,Yang Guijie,Li Yong.Torque density optimization for five-phase PMSM with third harmonic injection[J].Proceedings of the CSEE,2010,30(33):71-77.
[17]
Leila P,Hamid A T.Five-phase permanent-magnet motor drives[J].IEEE Transactions on Industry Applications,2005,41(1):30-37.
[18]
Wang Jin,Zhou Libing,Qu Ronghai.Harmonic current effect on torque density of a multiphase permanent magnet machine[C].2011 International Conference on Electrical Machines Systems (ICEMS),Beijing,2011,1-6.
[19]
Semail E,Kestelyn X,Bouscayrol A.Right harmonic spectrum for the back-electromotive force of a n-phase synchronous motor[C].IEEE Industrial Application Society Annual Meeting,Seattle,USA,2004,1-8.
Abdel-Khalik A,Masoud M,Williams B.Improved flux pattern with third harmonic injection for multiphase induction machines[J].IEEE Transactions on Power Electronics,2012,27(3):1563-1578.
[22]
Kestelyn X,Semail E.A vectorial approach for generation of optimal current references for multiphase permanent-magnet synchronous machines in real time[J].IEEE Transactions on Industrial Electronics,2011,58(11):5057-5065.
[23]
Shen Y,Liu G,Xia Z P,et al.Determination of maximum electromagnetic torque in PM brushless machines having two-segment halbach array[J].IEEE Transactions on Industrial Electronics,2014,61(2):718-729.
[24]
Scuiller F.Magnet shape optimization to reduce pulsating torque for a five-phase permanent-magnet low-speed machine[J].IEEE Transactions on Magnetics,2014,50(4):1-9.
[25]
Wang K,Zhu Z Q,Ombach G.Torque enhancement of surface-mounted permanent magnet machine using 3rd order harmonic[J].IEEE Transactions on Magnetics,2014,50(3):104-113.
[26]
Wang K,Zhu Z Q,Ombach G.Torque improvement of five-phase surface-mounted permanent magnet machine using 3rd order harmonic[J].IEEE Transactions on Energy Conversion,2014,29(3):735-747.
[27]
Toliyat H,Xu L,Lipo T A.A five-phase reluctance motor with high specific torque[J].IEEE Transactions on Industry Applications,1992,28(3):659-667.
[28]
Fornasiero E,Bianchi N,Bolognani S.Slot harmonic impact on rotor losses in fractional-slot permanent-magnet machines[J].IEEE Transactions on Industrial Electronics,2012,59(2):2257-2564.
[29]
Bianchi N,Fornasiero E.Impact of MMF space harmonic on rotor losses in fractional-slot permanent-magnet machines[J].IEEE Transactions on Energy Conversion,2009,24(2):323-328.
[30]
Jacek F G,Chong W,Joseph C L.Noise of polyphase electric motors[M].Boca Raton:CRC Press,2006.
[31]
Zhu Z Q,Xia Z P,Wu L J,et al.Analytical modeling and finite-element computation of radial vibration force in fractional-slot permanent-magnet brushless machines[J].IEEE Transactions on Industry Applications,2010,46(5):1908-1918.
