王世怀, 熊万里, 段志善. PWM变频调速电机轴承电磁损伤的机理研究[J]. 电力科学与工程. 2004(3): 5-8. Wang Shihuai, Xiong Wanli, Duan Shanzhi. Inves- tigation on motor bearing electromagnetism damage induced by PWM inverters[J]. Electric Power Science and Engineering. 2004(3): 5-8.
[2]
Ma Xiping, Liu Ruifang, Zheng Bohua. Analysis and Calculation of Capacitance Parameters in Induction Machines to Predict Shaft Voltage[C]. Proceeding of International Conference on Electrical Machines and Systems 2012: 1-5.
[3]
Don Macdonald, Will Gray. PWM drive related bearing failures[J]. IEEE Industry Application Magazine, August 1999, 5(4): 41-47.
[4]
Muetze, A. Andreas Binder. Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems [J]. IEEE Transactions on Industry Applications. 2007,43(3): 665-672.
[5]
Muetze, A. ; Tamminen, J. ; Ahola, J. ; Influence of motor operating parameters on discharge bearing current activity[C]. Energy Conversion Congress and Exposition (ECCE), 2010: 2739-2746.
[6]
Magdun, O, Binder, A. Calculation of roller and ball bearing capacitances and prediction of EDM currents Industrial Electronics[C]. IECON '09. 35th Annual Conference of IEEE2009: 1051-1056.
[7]
David Hyypio. Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression[J]. IEEE Transactions on Industry Applications. 2005, 41(2): 576-584.
[8]
D. Busse, J. Erdman, R. Kerkman, D. Schlegel, and G. Skibinski, System electrical parameters and their influence effect on bearing currents[J]. IEEE Transac- tions on Industry Applications. 1997, 33(2),: 577-584.
Doyle Busse, Jay Erdman, Russel J. Kerkman, Dave Schlegel, and Gary Skibinski. Bearing currents and their relationship to PWM drives[J]. IEEE Transac- tions on Power Electronics. 1997, 12(2): 243-252.
[11]
Doyle Busse, Jay Erdman, Russel J. Kerkman, Dave, Schlegel, and Gary Skibinski. The effects of PWM voltage source inverters on the mechanical performance of rolling bearings[C]. IEEE APEC Conference. 1996.
[12]
S. Chen, T. A. Lipo, and D. Fitzgerald, Modelling of bearing currents in inverter drives[J], IEEE Transac- tions on Industry Applications, 1996,32(6),: 1365- 1370.
[13]
万健如, 禹华军等. 变频电机轴承失效机理分析[J]. 轴承, 2002(8): 24-27. Wan Jianru, Yu Huajun. Failure mechanism of motor bearings in the frequency conversion driving system [J]. Bearing. 2002(8): 24-27.
[14]
黄立培, 浦志勇. 大容量PWM逆变器对交流电机的轴电压和轴承电流的影响[J]. 电工电能新技术. 2000, 19(4): 39-43. Huang Lipei, Pu Zhiyong. Effects of large capacity PWM inverter on AC motor bearing currents and shaft voltages[J]. Advanced Technology of Electrical Engineering and Energy. 2000, 19(4): 39-43.
[15]
幸善成, 吴正国. 逆变器驱动电机系统环路型电机轴承电流的研究[J]. 海军工程大学学报. 2006, 4(18): 64-68. Xing Shancheng, Wu Zhengguo. Circulating type motor bearing current in PW M inverter drives[J]. Journal of Naval University of Engineering. 2006. 4(18): 64-68.
[16]
刘欣, 孙力, 孙亚秀. PWM驱动系统中感应电动机轴电压轴电流研究[J]. 微电机, 2007, 40(9): 5-8. Liu Xin, Sun Li, Sun Yaxiu. Research on Induction motor shaft voltage and shaft current in PWM Drive system[J]. Micromotors Servo Technique, 2007. 40(9): 5-8.
