Zlatko Kolondzovski, Antero Arkkio, Jaakko Larjola. Power limits of high-speed permanent-magnet electrical machines for compressor applications[J]. IEEE Trans. on Energy Conversion. 2011. 26(1): 73-82.
[2]
Hong D K,Woo B C,Lee J Y,et al. Ultra high speed motor supported by air foil bearings for air blower cooling fuel cells [J]. IEEE Transactions on Magnetics, 2012, 48(2): 871-874.
[3]
沈建新, 李鹏, 郝鹤, 等. 高速永磁无刷电机电磁损耗的研究概况[J]. 中国电机工程学报, 2013, 33(3): 62-74. Shen Jianxin, Li Peng, Hao He, et al. Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art [J]. Proceedings of the CSEE, 2013, 33(3): 62-74.
[4]
董剑宁, 黄允凯, 金龙, 等. 高速永磁电机设计与分析技术综述[J]. 中国电机工程学报, 2014, 34(27): 4640-4653. Dong Jianning, Huang Yunkai, Jin Long, et al. Review on High Speed Permanent Magnet Machines Including Design and Analysis Technologies[J]. Proceedings of the CSEE, 2014, 34(27): 4640-4653.
[5]
Calfo R M, Smith M B, Tessaro J E. High-speed generators for power-dense, medium-power, gas turbine generator sets[J]．Naval Engineers Journal, 2007, 119(2): 63-81．
[6]
戴兴建, 邓占峰, 刘刚, 等. 大容量先进飞轮储能电源技术发展状况[J]. 电工技术学报, 2011, 26(7):133-140. Dai Xingjian, Deng Zhanfeng, Liu Gang, et al. Review on Advanced Flywheel Energy Storage System With Large Scale [J]. Transactions of China Electrotechnical Society, 2011, 26(7):133-140.
[7]
Jurca FN, Martis C. Theoretical and experimental analysis of a three-phase permanent magnet claw-pole synchronous generator[J]. IET Electric Power Applica- tions, 2012, 6(8):491-503.
[8]
孔晓光, 王凤翔, 邢军强．高速永磁电机的损耗计算与温度场分析[J]．电工技术学报,2012,27(9)：166-173． Kong Xiaoguang, Wang Fengxiang, Xing Junqiang. Losses Calculation and Temperature Field Analysis of High Speed Permanent Magnet Machines[J]. Transac- tions of China Electro Technical Society,2012,27(9)：166-173．
[9]
程文杰, 耿海鹏, 冯圣, 等. 高速永磁同步电机转子强度分析[J]. 中国电机工程学报, 2013, 32(27): 87-94. Cheng Wenjie, Geng Haipeng, Feng Sheng, et al. Rotor strength analysis of high-speed permanent magnet synchronous motors[J]. Proceedings of the CSEE, 2013, 32(27): 87-94.
[10]
黄允凯, 朱建国, 胡虔生. 顾及旋转铁耗的高速爪极电机三维磁热耦合分析[J]. 电工技术学报, 2010, 25(5): 54-60. Huang Yunkai, Hu Qiansheng, Zhu Jianguo. Magneto- thermal analysis of a high-speed claw pole motor considering rotational core loss [J]. Transactions of China Electrotechnical Society, 2010, 25(5): 54-60.
[11]
Popescu M,Dorrell D G．Proximity losses in the windings of high speed brushless permanent magnet ac motors with single tooth windings and parallel paths[J]. IEEE Transactions on Magnetics, 2013, 49(7): 3913-3916.
Liu Guangwei, Zhang Fengge, Zhao Xin, et al. Iron Loss and Air Friction Loss for High Speed Permanent Magnet Claw Pole Machine [J]. Transactions of China Electrotechnical Society, 2015, 30(2): 148-154.
[14]
王继强, 王凤翔, 宗鸣. 高速电机磁力轴承-转子系统临界转速的计算[J]．中国电机工程学报, 2007, 27(27): 94-98. Wang Jiqiang, Wang Fengxiang, Zong Ming. Critical speed calculation of magnetic bearing-rotor system for a high speed machine[J]．Proceedings of the CSEE, 2007, 27(27): 94-98.
[15]
Yon J M, Mellor P H, Wrobel R, et al. Analysis of semipermeable containment sleeve technology for high-speed permanent magnet machines[J]. IEEE Transactions on Energy Conversion, 2012, 27(3): 646-653.
[16]
Borisavljevic A,Polinder H,Ferreira A．On the speed limits of permanent-magnet machines[J]. IEEE Transac- tions on Industrial Electronics,2010,57(1)：220-226．
[17]
王天煜,王凤翔．高速永磁电机机组轴系临界转速及振动模态[J]．工程力学,2012,29(7)：264-269． Wang Tianyu, Wang Fengxiang. Critical speeds and vibration modes of shafting for high-speed permanent magnet machines[J]. Engineering Mechanics, 2012, 29(7): 264-269.
[18]
Li W,Zhang X,Cheng S,et al．Thermal optimization for a HSPMG used for distributed generation systems [J]. IEEE Transactions on Industrial Electronics, 2013, 60(2):474-482.
[19]
周强, 刘闯, 朱学忠, 等. 基于ASIC的高速开关磁阻电机数字控制器[J]. 电工技术学报, 2009, 24(3): 55-60. Zhou Qiang, Liu Chuang, Zhu Xuezhong, et al. The Digital Controller of High Speed Switched Reluctance Motor Based on ASIC [J]. Transactions of China Electrotechnical Society, 2009, 24(3):55-60.
