Chiba A, Takano Y, Takeno M, et al. Torque density and efficiency improvements of a switched reluctance motor without rare-earth materials for hybrid vehicles[J]. IEEE Trans. Industry Applications, 2011, 47(3): 1240-1246.
[2]
Panda D, Ramanarayanan V. Reduced acoustic noise variable DC-bus-voltage-based sensorless switched reluctance motor drive for HVAC applications[J]. IEEE Trans. Industry Electronics, 2007, 54(4): 2065-2078.
[3]
Cameron D E, Lang J H, Umans S D. The origin and reduction of acoustic noise in doubly salient variable reluctance motor[J]. IEEE Trans. Industry Applications, 1992, 26(6): 1250-1255.
[4]
Long S A, Zhu Z Q, Howe D. Vibration behaviour of stators of switched reluctance motors[J]. IEE Proc. Electr. Power Appl. , 2001, 148(3): 257-264.
[5]
Pollock C, Wu C Y. Acoustic noise cancellation techniques for switched reluctance drives[J]. IEEE Trans. Industry Applications, 1997, 33(2): 477-484.
[6]
Long S, Zhu Z Q, Howe D. Effective of active noise and vibration cancellation for switched reluctance machines operating under alternative control strategies[J]. IEEE Trans. Energy Conversion, 2005, 20(4): 792-801.
[7]
Cai W, Pillay P, Tang Z, et al. Low-vibration design of switched reluctance motors for automotive application using modal analysis[J]. IEEE Trans. Industry Applications, 2003, 39(4): 971-977.
[8]
Pollock C, Brackley M. Comparison of the acoustic noise of a flux-switching and a switched reluctance drive[J]. IEEE Trans. Industry Applications, 2003, 39(3): 826-834.
[9]
Hong J, Ha K, Lee J. Stator pole and yoke design for vibration reduction of switched reluctance motor[J]. IEEE Trans. on Magnetics, 2002, 38(2): 929-932.
[10]
Besbes M, Picod C, Camus F, et al. Influence of stator geometry upon vibratory behavior and electromagnetic performance of switched reluctance machine[J]. IEE Proc. Electr. Power Appl., 1998, 145(5): 462-468.
[11]
Rasmussen P O, Andreasen J H, Pijanowski J M. Structure stator spacers-a solution for noise reduction of switched reluctance motors[J]. IEEE Trans. Industry Applications, 2004, 40(2): 574-581.
[12]
Chai J Y, Liaw C M. Reduction of speed ripple and vibration for switched reluctance motor drive via intelligent current profiling[J]. IET Proc. Electr. Power Appl. , 2010, 4(5): 380-396.
[13]
Ahn J, Park S, Lee D. Hybrid excitation of SRM for reduction of vibration and acoustic noise[J]. IEEE Trans. Industry Electronics, 2004, 51(2): 374-380.
[14]
Lin F, Yang S. An approach to producing controlled radial force in a switched reluctance motor[J]. IEEE Trans. Industry Electronics, 2007, 54(4): 2137-2146.
[15]
Liu X, Zhu Z Q. Electromagnetic performance of novel variable flux reluctance machines with DC-field coil in stator[J]. IEEE Trans. Magnetics, 2013, 49(2): 3020-3028.
[16]
Liu X, Zhu Z Q. Comparative study of novel variable flux reluctance machines with doubly fed doubly salient machines[J]. IEEE Trans. Magnetics, 2013, 49(7): 3838-3841.
[17]
Miller T J E. Switched reluctance motors and their control[M]. Oxford, U. K. : Magna Physics, 1993.
