Yao K, Xu M, Meng M, et al. Design considerations for VRM transient response based on the output impedance[J]. IEEE Transactions on Power Electronics, 2003, 18(6): 1270-1277.
[4]
Ren Y, Xu M, Zhou J, et al. Analytical loss model of power MOSFET[J]. IEEE Transactions on Power Electronics, 2006, 21(2): 310-319.
[5]
Zhou J, Xu M, Sun J, et al. A self-driven soft-switching voltage regulator for future microprocessors[J]. IEEE Transactions on Power Electronics, 2005, 20(4): 806-814.
[6]
Ioinovici A. Switched-capacitor power electronics circuits[J]. IEEE Circuits System Magazine, 2001, 1(1): 37-42.
Zhou X, Zhang X, Liu J, et al. Investigation of candidate VRM topologies for future microprocessors[C]. IEEE Applied Power Electronics Conference, 1998: 145-150.
[12]
Xu M, Zhou J, Yao K, et al. Small signal modeling of a high bandwidth voltage regulator using coupled inductors[J]. IEEE Transactions on Power Electronics, 2007, 22(2): 399-406.
[13]
Jin K, Sun Y, Xu M, et al. Integrated magnetic self-driven ZVS nonisolated full-bridge conveter[J]. IEEE Transactions on Industrial Electronics, 2010, 57(5): 1615-1623.
[14]
Xu M, Sun J, Lee F C. Voltage divider and its application in the two-stage power architecture[C]. IEEE Applied Power Electronics Conference, 2006: 499-505.
