Li Yongbin, Shi Jinhao, Jiang Jianzhong. 2-D magnetic field model and analysis of a novel transverse flux permanent-magnet machine with common linking core[J]. Transactions of China Electrotechnical Society, 2006, 21(8): 5-6.
[2]
Larisa S, Viorel I A. On the designing procedure of a permanent magnet transverse flux generator (PMTFG) with specific topology[C]. International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, 2008: 99-104.
[3]
Hosseini S, Moghani J S, Ershad N F, et al. Design, prototyping, and analysis of a novel modular permanent-magnet transverse flux disk generator[J]. IEEE Trans. Magn. , 2011, 47(4): 772-780.
[4]
Hong D K, Woo B C, Koo D H, et al. Optimum design of transverse flux linear motor for weight reduction and improvement thrust force using response surface methodology[J]. IEEE Trans. Magn. , 2008, 44(11): 4317-4320.
[5]
Chan T F, Wang W, Lai L L. Performance of an axial-flux permanet magnet synchronous generator from 3-D finite-element analysis[J]. IEEE Trans. Energy Conv. , 2010, 25(3): 669-676.
Liu Zhemin, Chen Xiejie, Chen Lixiang, et al. Study of a new transverse flux permanent magnet machine based on 3D-FEM[J]. Transactions of China Electrotechnical Society, 2006, 21(5): 19-20.
[8]
Bang D J, Polinder H, Shrestha G, et al. Design of a lightweight transverse flux permanent magnet machine for direct drive wind turbines[C]. Industry Applications Soc. Annu. Meeting, 2008: 7 pages.
[9]
Zou J, Wang Q, Xu Y. Influence of the permanent magnet magnetization length on the performance of a tubular transverse flux permanent magnet linear machine used for electromagnetic launch[J]. IEEE Trans. Plasma Sci. , 2011, 39(1): 241-246.
[10]
Svechkarenko D, Soulard J, Sadarangani C. Performance evaluation of a novel transverse flux generator with 3D finite element analysis[C]. Proc. Int. Conf. Electr. Machines Systems, 2009: 6 pages.
[11]
Weh H, May H. Achievable force densities for permanent magnet excited machines in new configurations[C]. International Conference on Electrical Machines, Munchen, Germany, 1986: 1107-1111.
Li Yaxu. Tentative analysis on topological strueture of transverse flux motor[J]. Marine Electric & Electric Technology, 2003, 23(1): 8-12.
[15]
Cosic A, Sadarangani C, Timmerman J. Design and manufac-turing of a linear transverse flux permanent magnet machines[C]. Industry Applications Soc. Annu. Meeting, 2008: 5 pages.
Shi Jinhao, Li Yongbin, Jiang Jianzhong. Research on the cogging torque of a novel transverse flux permanent-magnetic machine with the concentrated flux rotor[J]. Transactions of China Electrotechnical Society, 2005, 20(3): 36-39.
[18]
Guo Y G, Zhu J G, Watterson P A, et al. Comparative study of 3-d flux electrical machines with soft magnetic composite cores[J]. IEEE Transactions on Industry Applications, 2003, 39(6): 1696-1703.
[19]
Patterson G, Koseki T, Aoyama Y, et al. Simple modeling and prototype experiments for a new high- thrust, low-speed permanent magnet disk motor[C]. Proc. Int. Conf. Electr. Machines Systems, 2009: 6 pages.
