Mitchell D M. An analytical investigation of current-injected control for constant-frequency switching regulators[J]. IEEE Transactions on Power Electronics, 1986, 1(3): 167-174.
[3]
Middlebrook R D. Topics in multiple-loop regulators and current-mode programming[C]. IEEE Power Electronics Specialists Conference, 1985: 716-732.
[4]
Goder D, Pelletier W. V2 architecture provides ultra-fast transient response in switch power supplies[C]. Proceedings of High Frequency Power Conversion, Las Vegas, Nevada, 1996: 19-23.
Qu S. Modeling and design considerations of V2 controlled buck regulator[C]. IEEE Applied Power Electronics Conference and Exposition, USA, 2001: 507-513.
[8]
Wang F, Wu S, Xu J, et al. Modeling and simulation of V2 controlled switching converters[C]. IEEE International Conference on Power Electronics and Drive Systems, Singapore, 2003: 613-617.
[9]
Schuellein G. Current sharing of redundant synchronous buck regulators powering high performance microprocessors using the V2 control method[C]. IEEE Applied Power Electronics Conference and Exposition, USA, 1998: 853-859.
Deisch C. Simple switching control method changes power converter into a current source[C]. IEEE Power Electronics Specialists Conference, 1978: 300-306.
Wang F, Xu J, Xu J. Small-signal model of V2 control technique with compensation[C]. IEEE International Conference on Communications, Circuits and Systems, China, 2004: 1358-1362.
[18]
Sun J. Characterization and performance comparison of ripple-based control for voltage regulator modules[J]. IEEE Transactions on Power Electronics, 2006, 21(2): 346-353.
