Zou Y W, Huang X L, Tan L L, et al. Current Research Situation and Developing Tendency about Wireless Power Transmission, International Conference on Electrical and Control Engineering, US, IEEE, 2010: 3507-3511.
[2]
Wu H H, Gilchrist A, Sealy K, et al. A Review on Inductive Charging for Electric Vehicles, International Electric Machines & Drives Conference, US, IEEE, 2011: 143-147.
[3]
Achterberg J, Lomonova E A, De Boeij J. Coil Array Structures Compared for Contactless Battery Charging Platform[J]. IEEE Transactions on Magne- tics, 2008: 617-622.
[4]
Huh J, Lee W Y, Choi S Y, et al. A New Cross- Segmented Power Supply Rail for Roadway Powered Electric Vehicles[C]. International Sympo- sium on Power Electronics for Distributed Generation Systems, US, IEEE, 2011: 291-296.
[5]
Huh J, Lee W Y, Cho G H, et al. Characterization of Novel Inductive Power Transfer Systems for On-Line Electric Vehicles[C]. Applied Power Electronics Conference and Exposition, US, IEEE, 2011: 1975- 1979.
[6]
Zhu C B, Liu K, Yu C L, et al. Simulation and Experimental Analysis on Wireless Energy Transfer Based on Magnetic Resonances, Vehicle Power and Propulsion Conference, US, IEEE, 2008: 1-4.
[7]
Zhang X, Yang Q X, Chen H Y, et al. Modeling and Design and Experimental Verification of Contactless Power Transmission Systems via Electromagnetic Resonant Coupling[J]. Proceeding of the CSEE, 2012: 153-158.
[8]
Tian Y, Sun Y, Su Y G, et al. Neural Network -based Constant Current Control of Dynamic Wireless Power Supply System for Electric Vehicles, Information Technology Journal, Pakistan, ITJ, 2012: 876-883.
[9]
Kissin M L G, Hao H and Covic G A. A practical Multiphase IPT System for AGV and Roadway Appli- cations[C]. Energy Conversion Congress and Exposi- tion, US, 2010: 1844-1850.
[10]
Liu X, Hui S Y R. Equivalent Circuit Modeling of a Multilayer Planar Winding Array Structure for Use in a Universal Contactless Battery Charging Platform[J]. IEEE Transactions on Power Electronics, 2007: 21-29.
[11]
Covic G A, Boys J T, Kissin M L G, et al. A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles[J]. IEEE Transactions on Industrial Electronics, 2007, 54(6): 3370 - 3378.
[12]
Zhang W, Wong S C, Tse C K, et al. A Study of Sectional Tracks in Roadway Inductive Power Transfer System[C]. ECCE: Energy Conversion Innovation for a Clean Energy Future, US, IEEE, 2011: 822-826.
[13]
Huh J, Lee S W, Lee W Y, et al. Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles, IEEE Transactions on Power Electronics, US, IEEE, 2011, 26(12): 3666-3679.
[14]
Villa J L, Sallán J, Osorio J F S, et al. High- Misalignment Tolerant Compensation Topology for ICPT Systems[J]. IEEE Transactions on Industrial Electronics, 2012: 945-951.
[15]
Bai S Z, Pantic Z, Lukic S. Dual-Powered Track Sections for Roadway Powered Electric Vehicles[C]. Vehicle Power and Propulsion Conference, US, IEEE, 2011: 1-6.
[16]
Ahn S Y and Kim J. Magnetic Field Design for High Efficient and Low EMF Wireless Power Transfer in On-Line Electric Vehicle[C]. Proceedings of the 5th European Conference on Antennas and Propagation, 2011: 3979-3982.
[17]
Budhia M, Covic G A, Boys J T. Design and Optimisation of Magnetic Structures for Lumped Inductive Power Transfer Systems[C]. Energy Con- version Congress and Exposition, 2009: 2081- 2088.
[18]
Ahn S Y, Pak J, Song T, et al. Low Frequency Electromagnetic Field Reduction Techniques for the On-Line Electric Vehicle (OLEV)[C]. International Symposium on Electromagnetic Compatibility, 2010: 625-630.
