全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

不同载流条件下滑动电接触特性

, PP. 18-23

Keywords: 滑动电接触,接触电阻,磨损特性,温升特性

Full-Text   Cite this paper   Add to My Lib

Abstract:

不同载流情况下,引起滑动接触面温升的主要因素有摩擦热、焦耳热、电弧热。接触面的温升使接触材料表面发生物理化学变化,从而改变了接触面成分,同时反过来影响接触面的滑动电接触性能。论文通过对铜基粉末冶金滑板、浸铜碳滑板两种滑板材料与铜锡导线的对磨实验,分析了两种滑板材料在受流摩擦时的磨损行为。研究表明随着电流的增大,两种滑板材料的接触电阻、温度以及磨耗率都在增大,浸铜碳滑板材料的接触电阻变化率较小,但接触表面的温度偏高,该滑板磨耗率变化较小,受流磨损性能较好。

References

[1]  Shunichi Kubo, Koji Kato. Effect of arc discharge on wear rate of Cu impregnated carbon strip in unduplicated sliding against Cu trolley under electric current[J]. Wear, 1998, 21(6): 172-178.
[2]  罗君, 马永强. 弓网接触力检测的仿真研究[D]. 成都: 西南交通大学, 2006.
[3]  臧春艳, 何俊佳, 李劲, 等. 密封继电器接触电阻与表面膜研究[J]. 中国电机工程学报, 2008, 28(31): 125-130.
[4]  郭美华, 丁雨田. 铜合金线材干滑动摩擦磨损行为研究[J].铸造技术, 2008, 29(4): 512-515.
[5]  李鹏. 载流摩擦磨损试验机的研制及滑板材料摩擦磨损和载流性能研究[D]. 武汉: 武汉材料保护研究所, 2007.
[6]  Filippakou M P, Karagiannopoulos C G, Agoris D P. Electrical contact overheating under short-circuit currents[J]. Electric Power Systems Research, 2001, 16(8): 141-147.
[7]  Jia S G, Liu P, Ren F Z. Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J]. Materials Science and Engineering, 2005, 398: 262-268.
[8]  Kie Bling, Puschmann, Schmieder. 电气化铁道接触网[M]. 中铁电气化局集团有限公司译. 北京: 中国电力出版社, 2004.
[9]  高飞, 杜素强, 符蓉. 不同速度下石墨含量对铜基摩擦材料性能的影响[J]. 矿冶工程, 2005, 25(4): 80-82.
[10]  戴利民, 林吉忠, 丁新华. 滑板材料受流摩擦时接触点瞬态温升对磨损性能的影响[J]. 中国铁道科学, 2002, 23(2): 111-117.
[11]  郭凤仪, 陈忠华.电接触理论及其应用技术[M].北京: 中国电力出版社, 2008.
[12]  Kharin S N, Alma Ata, Mikhailov V V. Dynamic and thermal physical processes in low-current sliding contacts[J]. International Applied Mechanics, 2001, 44(12): 301-305.
[13]  Hiroki Nagasawa, Koiji Kato. Wear mechanism of copper alloy wire sliding against current collector materials[J]. Wear, 1998, 21(6): 179-183.
[14]  Seering W, Vesely C, Armbruster K. Experimental and analytical study of pantograph dynamics[J]. IEEE Trans. on Components, Hybrids, and Manufacturing Techonology, 1991, 15(2): 270-275.
[15]  Zhai H X, Huang Z Y. Instabilities of sliding friction governed by asperity interference mechanisms[J]. Wear, 2004, 25(7): 414-422.
[16]  Park Tong Jin, Han Chang Soo, Jang Jin Hee. Dynamic sensitivity analysis for the pantograph of a high-speed rail vehicle[J]. Academic Press, 2003, 26(6): 235-260.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133