Refaie El A M. Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 107-121.
[2]
Bianchi N, Bolognani S, Frare P. Design criteria for high-efficiency SPM synchronous motors[J]. IEEE Transactions on Energy Conversion, 2006, 21(2): 396-404.
Dong Ting, Huang Wei, Wang Chengyuan. Influence of unequal teeth tips width and alternate winding on torque characteristics in direct drive table motor[J]. Transactions of China Electrotechnical Society, 2010, 25(8): 12-17, 30.
[5]
Wang J B, Atallah K, Zhu Z Q, et al. Modular three-phase permanent-magnet brushless machines for in-wheel applications[J]. IEEE Transactions on Vehicular Technology, 2008, 57(5): 2714-2720.
[6]
Lindh P M, Jussila H K, Niemela M, et al. Comparison of concentrated winding permanent magnet motors with embedded and surface-mounted rotor magnets[J]. IEEE Transactions on Magnetics, 2009, 45(5): 2085-2089.
[7]
Magnussen F, Lendenmann H. Parasitic effects in PM machines with concentrated windings[J]. IEEE Transactions on Industry Applications, 2007, 43(5): 1223-1232.
[8]
Refaie El A M, Jahns T M, Novotny D W. Analysis of surface permanent magnet machines with fractional- slot concentrated windings[J]. IEEE Transactions on Energy Conversion, 2006, 21(1): 34-43.
[9]
Reddy P B, Jahns T M, Refaie El A M. Impact of winding layer number and slot/pole combination on AC armature losses of synchronous surface PM machines designed for wide constant power speed range operation[C]. Proceedings of IEEE Industry Applications Society Annual Meeting, Edmonton, Alta, Oct., 2008: 1-8.
[10]
Cheng S P, Hwang C C. Design of high-performance spindle motors with single-layer concentrated windings and unequal tooth widths[J]. IEEE Transactions on Magnetics, 2007, 43(2): 802-804.
[11]
Wang J B, Xia Z P, Long S A, et al. Radial force density and vibration characteristics of modular permanent magnet brushless AC machine[C]. IEE Proceedings of Electric Power Applications, 2006, 153(6): 793-801.
Sun Xin, Han Xueyan, Li Yan. Analysis and calculation of leakage factor in permanent magnet synchronous motors with adjacent number of poles and slots[J]. Micromotors, 2008, 48(1): 7-9.
[14]
Qu R H, Lipo T A. Analysis and modeling of air gap & zigzag leakage fluxes in a surface mounted-PM machine[J]. IEEE Transactions on Industry Applications, 2004, 40(1): 121-127.
