Qian Zhaoming, Zhang Junming, Xie Xiaogao, et al. Progress in Power Eleetronic System Integration[J]. Transactions of China Electrotechrical Society, 2006, 21(3): 1-14.
[3]
Middlebrook R D. Input filter considerations in design and application of switching regulators[C]. Proceedings of the IEEE Industry Applications Conference, 1979: 366-382.
[4]
Wildrick C M, Lee F C, Cho B H, et al. A method of defining the load impedance specification for a stable distributed power system[J]. IEEE Transactions. Power Electronics, 1995, 10(3): 280-285.
[5]
Feng X, Ye Z, Xing K, et al. Impedance specification and impedance improvement for dc distributed power system[C]. Proceedings of the IEEE Power Electronics Specialist Conference, 1999: 889-894.
[6]
Feng X, Liu J, Lee F C. impedance specifications for stable dc distributed power system[J]. IEEE Transactions on. Power Electronics, 2002, 17(2): 157-162.
[7]
Abe S, Hirokawa M, Zaitsu T, et al. Stability comparison of voltage mode and peak current mode control for bus converter in on-board distributed power system[C]. Proceedings of the International Telecommunications Energy Conference, 2006: 1-5.
[8]
Choi B, Cho B H. Intermediate line filter design to meet both impedance compatibility and EMI specifications[J]. IEEE Transactions on. Power Electronics, 1995, 10(5): 583-589.
[9]
R. Erickson. Optimal single-resistor damping of input filter[C], Proceedings of the IEEE Applied Power Electronics Conference, 1999: 1073-1097.
[10]
Karppanen M, Hankaniemi M, Suntio T. Dynamical characterization of peak-current-mode- controlled buck converter With output-current feedforward[J]. IEEE Transactions on Power Electronics, 2007, 22(2): 451.
[11]
Rahimi A M. Emadi A. Active damping in dc/dc power electronic converters: a novel method to overcome the problems of constant power loads[J]. IEEE Transactions on Industrial Electronics, 2009, 56(5): 1428-1439.
[12]
Abe S, Hirokawa M, Zaitsu T, et al. Stability. design consideration for on-board distributed power system consisting of full-regulated bus converter and POLs[C]. Proceedings of the IEEE Power Electronics Specialist Conference, 2006: 2669-2673.
[13]
Abe S, Hirokawa M, Zaitsu T, et al. Stability. design consideration of full-regulated bus converter for system stability of on-board distributed power system[C]. Proceedings of the International Symposium on Power Electronics, Eleetrical Drives, Automation and Motion, 2006: 11-15.
[14]
Shinjo, F, Wada, K, Shimizu T A Single-phase grid-connected inverter with a power decoupling function[C]. Proceedings of the IEEE Power Electronics Specialist Conference, 2007: 1245-1249.
[15]
Wildrick C M. Stability of distributed power supply system[D], Blacksburg: Virginia Polytechnic. Institute. State University, 1993.
[16]
阮新波, 严仰光, 脉宽调制DC/DC全桥变换器的软开关技术[M], 科学出版社, 1999.
[17]
康华光. 电子技术基础(模拟部分)[M]. 北京: 高等教育出版社, 2005.
[18]
701_3606_0_91464a8d.HTM.
[19]
Van Wyk J D, Lee F C. Power electronics technology- Status and future[C]. Proceedings of the IEEE Industry Applications Conference, 1999, 61-70.
[20]
Blaabjerg F, Consoli A, Ferreira J A, et al. The future of electronic power processing and conversion[J]. IEEE Transactions on Power Electronics, 2005, 20(3): 715-720.
[21]
Luo S. A review of distributed power systems part I: DC distributed power system[J]. Proceedings of the IEEE Aerospace and Electronic Systems Magazine, 2005, 20(8): 5-16.
[22]
Feng X, Ye Z, Xing K, et al. Individual load impedance specification for a stable dc distributed power system[C]. Proceedings of the IEEE Applied Power Electronics Conference, 1999: 923-929.
[23]
Chen Y, Feng X, Lee F C. System stability analysis based on three-dimension forbidden region[C]. Proceedings of the IEEE Industry Applications Conference, 1999: 1-4.
[24]
Abe S, Hirokawa M, Zaitsu T, et al. Optimal bus capacitance design for system stability in onboard distributed power architecture[C]. Proceedings of the International Symposium on Power Electronics, Eleetrical Drives, Automation and Motion, 2008: 393-399.
[25]
Wu Tao, Ruan Xinbo. Characterization of input/output impedance specifications for dc distributed power system[C]. Proceedings of the International Telecommunications Energy Conference, 2006: 982-987.
