Binns K J, Barnard W R, Jabbar M A. Hybrid PM synchronous motors[J]. Proc. IEE-B, 1978, 125(3): 203-208.
[2]
Binns K J, Jabbar M A, Parry G E. Choice of parameters in hybrid PM synchronous motor[J]. Proc. IEE, 1979, 126(8): 741-744.
[3]
Miyashita K, Yamashita S, Tanabe S, et al. Development of a high speed 2-pole permanent magnet synchronous motor[J]. IEEE Trans. on PAS, 1980, 99(6): 2175-2181.
[4]
Parker. R J Advances in permanent magnetism[M]. New York: John Wiley&Sons, 1990.
[5]
Broeck H W van Der, Skudelny H C, Stanke G V. Analysis and realization of a pulsewidth modulator based on voltage space vectors[J]. IEEE Trans. Ind. Appl., 1988, 24(1): 142-150.
[6]
Takahashi, Toshihiko N. A new quick-response and high-efficiency control strategy of an induction motor[J]. IEEE Trans. Ind. Appl., 1986, 22(5): 820-827.
[7]
Vas P. Sensorless vector and direct torque control[M]. Oxford: Oxford University Press, 1998.
[8]
Lawrenson P J, Stephenson J M, Blenkinsop P T, et al.Variable-speed switched reluctance motors[J]. Proc. IEE-B, 1980, 127(4): 253-265.
[9]
Bianchi N. Theory and design of fractional-slot PM machines[M]. Padova: CLEUP, 2007.
[10]
Zhu Z Q, Chan C C. Electrical machine topologies and technologies on electric, hybrid, and fuel cell vehicles[C]. IEEE Vehicle Power and Propulsion Conf. (VPPC), Keynote Speech- KN3, Paper No: H08787, 2008: 1-6.
[11]
Mecrow B C, Jack A G, Atkinson D J, et al. Design and testing of a four-phase fault-tolerant permanent- magnet machine for an engine fuel pump[J]. IEEE Trans. Energy Conv., 2004, 19(4): 671-678.
[12]
Paulides J H, Jewell G W, Howe D. An evaluation of alternative stator lamination materials for a high- speed, 1.5MW, permanent magnet generator[J]. IEEE Trans. Magnetics, 2004, 40(4):2041-2043.
[13]
Zhu Z Q, Ede J D, Howe D. Design of high-speed brushless dc motors for sensorless operation[C]. Proc. 16th Int. Conf. on Electrical Machines, ICEM 2004, Cracow, Poland, Paper No: 235, CD ROM.
[14]
Binder A, Schneider T, Klohr M. Fixation of buried and surface-mounted magnets in high-speed perma- nent-magnet synchronous machines[J]. IEEE Trans. Ind. Appl., 2006, 42(4): 1031-1037.
[15]
Merrill F W. Permanent magnet excited synchronous motor[J]. IEE Trans., 1955, 74: 1754-1760.
[16]
Honsinger V P. Performance of polyphase permanent magnet machines[J]. IEEE Trans. Power Apparatus and Systems, 1980, 99(4): 1510-1518.
[17]
Bose B K. Power electronics and variable frequency drives[M]. New York: IEEE Press, 1997.
[18]
Depenbrock M. Direct self-control of inverter-fed induction machine[J]. IEEE Trans. Power Electronics, 1988, 3(4): 420-429.
[19]
Binns K J, Wong T M. Analysis and performance of a high-field PM synchronous machine[J]. Proc. IEE-B, 1984, 131(6): 252-258.
[20]
Rahman M A, Little T A. Dynamic performance analysis of permanent magnet synchronous motors[J]. IEEE Trans. Power Apparatus and Systems, 1984, 103(6): 1277-1282.
[21]
Jahns T M. Torque production in permanent magnet synchronous motor drives with rectangular current excitation[J]. IEEE Trans. Ind. Appl., 1984, 20(4) 803-813.
[22]
Chalmers B J, Hamed S A, Baines G D. Parameters and performances of a high-field PM synchronous motor for variable frequency operation[J]. Proc. IEE-B, 1985, 132(3): 117-124.
[23]
Uddin M N, Radwan T S, Rahman M A. Performance of interior permanent magnet motor drive over wide speed range[J]. IEEE Trans. Energy Conversion, 2002, 17(1):79-84.
[24]
Rahman M A, Little T A, Slemon G R. Analytical models for interior-type PM synchronous motors[J]. IEEE Trans. Magnetics, 1985, 21(5): 1741-1743.
[25]
Jahns T M, Kliman G B, Newmann T W. Interior permanent magnet synchronous motors for adjustable- speed drives[J]. IEEE Trans. Ind. Appl., 1986, 22(4): 738-747.
[26]
Kenjo T, Nagamori S. Permanent magnet and brushless DC motors[M]. Oxford: Clarendon Press, 1985.
[27]
Hendershot J R, Miller T J E. Design of brushless permanent magnet motors[M]. Oxford: Magna Physics Publishing & Clarendon Press, 1994.
[28]
Gieras J F, Wing M. Permannet magnet motors technology-design and application[M]. 2nd ed. New York: Marcel Dekker, 2002.
[29]
Takeda Y, Matsui N, Morimoto S, et al. Design and analysis of interior permanent magnet synchronous motors[M]. Tokyo: Ohmsha, 2001.
[30]
Zhu Z Q, Howe D. Electrical machines and drives for electric, hybrid, and fuel cell vehicles[J].Proc. IEEE, 2007, 95(4): 746-765.
[31]
Polinder H, F F A van der Pijl, G J de Vilder, et al. Comparison of direct-drive and geared generator concepts for wind turbines[J]. IEEE Trans. Energy Conv., 2006, 21(3): 725-733.
[32]
Hesmondhalgh D E, Tipping D, Amrani M. Design and construction of a high-speed high performance direct-drive hand piece[J]. Proc. IEE-B, 1987, 134: 286-294.
[33]
Ede J D, Zhu Z Q, Howe D. Rotor resonances of high-speed permanent-magnet brushless machines[J]. IEEE Trans. Ind. Appl., 2002, 38(6): 1543-1548.
[34]
Bianchi N, Bolognani S, Luise F. Analysis and design of a PM brushless motor for high-speed operations[J]. IEEE Trans. Energy Conv., 2005, 20(3): 629-637.
[35]
Kolondzovski Z, Arkkio A, Larjola J, et al. Power limits of high-speed permanent-magnet electrical machines for compressor applications[J]. IEEE Trans. Energy Conv., 2011, 26(1): 73-82.
[36]
Zhu Z Q, Gong L M. Investigation of effectiveness of sensorless operation in carrier signal injection-based sensorless control methods[J]. IEEE Trans. Industrial Electronics, 2011, 58(8): 3431-3439.
[37]
Bose B K. A high-performance inverter-fed drive system of an interior permanent magnet synchronous machine[J].IEEE Trans. Ind. Appl., 1988, 24(6): 987-997.
[38]
Morimoto S, Sanada M, Takeda Y. Inverter-driven synchronous motors for constant power[J]. IEEE Ind. Appl. Magazine, 1996, 2(6): 18-24.
[39]
Vaez S, John V I, Rahman M A. An on-line loss minimization controller for interior permanent magnet motor drives[J]. IEEE Trans. Energy Conv., 1999, 14(4): 1435-1440.
[40]
Cros J, Viarouge P. Synthesis of high performance PM machines with concentrated windings[J]. IEEE Trans. Energy Conv., 2002, 17(2): 248-253.
[41]
El-Refaie A M. Fractional-slot concentrated winding synchronous permanent magnet machines: opportunities and challenges[J].IEEE Trans. Industrial Elec- tronics, 2010, 57(1): 107-121.
[42]
Zhu Z Q. Fractional slot permanent magnet brushless machines and drives for electric and hybrid propulsion systems[J]. Int. Journal for Computation and Mathematics in Elec. and Elect. Eng. (COMPEL), 2011, 30(1): 9-31.
[43]
Refaie A M El, Jahns T M. Optimal flux-weakening in surface PM machines using concentrated windings[J]. IEEE Trans. Ind. Appl., 2005, 41(3):790-800.
[44]
Mecrow C, Jack A G, Haylock J A. Fault tolerant permanent magnet motors drives[J]. Proc. IEE-EPA, 1996, 143(6): 433-437.
[45]
Chan C C, Zhuang R, Chau K T, et al. Optimal efficiency control of PM hybrid motor drives for electric vehicles[C]. Proc. IEEE Power Electronics Specialists Conference, 1997: 363-368.
[46]
Luo X, Lipo T A. A synchronous/permanent magnet hybrid AC machine[J]. IEEE Trans. Energy Conv., 2000, 15(2): 203-210.
[47]
Leonardi F, Matsuo T, Li T Y, et al. Design considerations and test results for a doubly salient PM motor with flux control[C]. IEEE Ind. Appl. Society Annual Meeting, 1996: 458-463.
[48]
Amara Y, Vido L, Gabsi M, et al. Hybrid excitation synchronous machines: energy efficient solution for vehicle propulsion[J]. IEEE Trans. Vehicular Technology, 2009, 58 (5): 2137-2149.
[49]
Owen R, Zhu Z Q, Wang J B, et al. Review of variable-flux permanent magnet machines[C]. Int. Conf. on Elec. Machines and Systems, 2011, Beijing, China, paper PS-PMM-60.
[50]
Liao Y, Liang F, Lipo T A. A novel permanent magnet machine with doubly salient structure[J]. IEEE Trans. Ind. Appl., 1995, 3(5): 1069-1078.
[51]
Jack A G, Mecrow B C, Dickinson P G, et al.Permanent-magnet machines with powdered iron cores and pre-pressed windings[J]. IEEE Trans. Ind. Appl., 2000, 36(4):1077-1083.
[52]
Weh H, May H. Achievable force densities for permanent magnet excited machines in new configurations[C]. Proc. Int. Conf. Electrical Machines, 1986: 1107-1111.
[53]
Weh H, Hoffmann H, Landrath J. New permanent magnet excited synchronous machine with high efficiency at low speed[C]. Proc. Int. Conf. Electrical Machines, 1988: 1-6.
[54]
Xu L Y. A new breed of electric machines - basic analysis and applications of dual mechanical port electric machines[C]. Keynote Speech, International Conference on Electrical Machines and Systems, 2005.
Guglielmi P, Pastorelli M, Vagati A. Cross saturation effects in IPM motors and related impact on zero- speed sensorless control[J]. IEEE Trans. Ind. Appl, 2006, 42 (6): 1516-1522.
[57]
Bianchi N, Bolognami S, Jang J H, et al.Comparison of PM motor structures and sensorless control techniques for zero-speed rotor position detection[J]. IEEE Trans. Power Electronics, 2007, 22(6): 2466-2475.
[58]
Li Y, Zhu Z Q, Howe D, et al. Improved rotor position estimation by signal Injection in brushless AC motors, accounting for cross-coupling magnetic saturation[J]. IEEE Trans. Ind. Appl., 2009, 45(5): 1843-1849.
[59]
Gong L M, Zhu Z Q. Modeling and compensation of inverter nonlinearity effects in carrier signal injection-based sensorless control methods from positive sequence carrier current distortion[J]. IEEE Trans. on Ind. Appl., 2011, 47(3): 1283-1292.
[60]
Jahns T M. Flux-weakening regime operation of an interior permanent magnet synchronous motor drive [J]. IEEE Trans. Ind. Appl., 1987, 23(4): 681-689, 1987.
[61]
Schiferl R, Lipo T A. Power capability of salient pole permanent magnet synchronous motors in variable speed drive[J]. IEEE Trans. Ind. Appl., 1990, 26(1): 115-123.
[62]
Soong W L, Miller T J E. Field-weakening performance of brushless synchronous AC motor drives[J]. Proc. IEE-EPA, 1994, 141: 331-340.
[63]
Morimoto S, Sanada M, Takeda Y. Wide-speed operation of interior permanent magnet synchronous motors with high-performance current regulator[J]. IEEE Trans. Ind. Appl., 1994, 30(4): 920-926.
[64]
Jack G, Mecrow B C, Haylock J A. A comparative study of permanent magnet and switched reluctance motors for high-performance fault-tolerant applications[J]. IEEE Trans. Ind. Appl., 1996, 32(4): 889-895.
[65]
Spooner E, Khatab S A W, Nicolaou N G. Hybrid excitation of AC and DC machines[C]. Proc. IEE Int. Conf. Electrical Machines and Drives, 1989: 48-52.
[66]
Sugii Y, Yada M, Koga S. Applicability of various motors to electric vehicles[C]. Proc. 13th Int. Electric Vehicles Symp., 1996: 757-764.
[67]
Tapia J A, Leonardi F, Lipo T A. Consequent pole permanent magnet machine with field weakening capability[C]. Proc. IEEE Electric Machines and Drives Conference, 2001: 126-131.
[68]
Chan C C, Zhang R, Chau K T, et al.A novel brushless PM hybrid motor with a claw-type rotor topology for electric vehicles[C]. Proc. 13th International Electric Vehicle Symposium, 1996, II: 579-584.
[69]
Hoang E, Lecrivain M, Gabsi M. A new structure of a switching flux synchronous polyphased machine with hybrid excitation[C]. Proc. European Conf. Power Electronics and Applications, 2007: 1-8.
[70]
Chen J T, Zhu Z Q, Iwasaki S, et al.A novel hybrid excited switched-flux brushless AC machine for EV/HEV applications[J]. IEEE Trans. Vehicular Technology, 2011, 60(4): 1365-1373.
Yu C, Chau K T. Design, analysis, and control of DC-excited memory motors[J]. IEEE Trans. Energy Conv., 2011, 26(2): 479-489.
[73]
Honda Y, Higaki T, Morimoto S, et al, Rotor design optimisation of a multi-layer interior permanent- magnet synchronous motor[J]. Proc. IEE-EPA, 1998, 145(2): 119-124.
[74]
Soong W L, Staton D A, Miller T J E. Design of a new axially laminated interior permanent magnet motor[J]. IEEE Trans. Ind. Appl., 1995, 31 (2): 358-367.
[75]
Lipo T A. Synchronous reluctance machines-a viable alternative for AC drives? [J]. Electric Machines and Power Systems, 1991, 19(6): 659-671.
[76]
Vagati, Pellegrino G, Guglielmi P. Design tradeoffs between constant power speed range, uncontrolled generator operation and rated current of IPM motor drives[C]. 2010 IEEE Energy Conversion Congress and Exposition (ECCE), 2010: 4107-4114.
[77]
Armando, Guglielmi P, Pellegrino G, et al.Accurate magnetic modelling and performance analysis of IPM-PMASR motors[C]. 2007 IEEE Ind. Appl. Society Annual Meeting, 2007: 133-140.
[78]
Deodhar R P, Andersson S, Boldea I, et al. The flux-reversal machine: a new brushless doubly-salient permanent-magnet machine[J]. IEEE Trans. Ind. Appl., 1997, 33(4): 925-934.
[79]
Zhu Z Q, Chen J T. Advanced flux-switching permanent magnet brushless machines[J]. IEEE Trans. Magnetics, 2010, 46(6): 1447-1453.
[80]
Zhu Z Q. Recent development of Halbach permanent magnet machines and applications[C]. The 4th Power Conversion Conference, JIEE, IEEE-IAS, 2-5 April 2007, Nagoya, Japan, 2007: K9-K16.
[81]
Atallah K, Howe D. The application of Halbach cylinders to brushless AC servo motors[J].IEEE Trans Magnetics, 1998, 34(1):2060-2062.
