Wang Xiuhe, Yang Yubo. The method for reducing cogging torque by suitable selection of pole-arc coefficient in solid-rotor PM motors[J]. Proceedings of the CSEE, 2005, 25(15): 146-149.
Wang Xiuhe, Yang Yubo, Fu Dajin. Study of cogging torque in surface-mounted permanent magnet motors with energy method[J]. Journal of Magnetism and Magnetic Material, 2003, 267(11): 80-85.
[5]
Lin D, Ho S L, Fu W N. Analytical prediction of cogging torque in surface-mounted permanent-magnet motors[J]. IEEE Trans. on Magnetics, 2009, 45(9): 3296-3302.
[6]
Bianchi N, Bolognani S. Design techniques for reducing the cogging torque in surface-mounted PM motors[J]. IEEE Trans. on Industry Applications, 2002, 38(5): 1259-1265.
[7]
Breton C, Bartolome J. Influence of machine symmetry on reduction of cogging torque in permanent-magnet brushless motors[J]. IEEE Trans. on Magnetics, 2000, 36(5): 3819-3823.
Luke Dosiek, Pragasen Pillay. Cogging torque reduction in permanent magnet machines[J]. IEEE Trans. on Industry Application, 2007, 43(6): 1565- 1571.
[10]
Mohammad S Islam , Sayeed Mir, Tomy Sebastian. Issues in reducing the cogging torque of mass- produced permanent-magnet brushless DC motor[J]. IEEE Trans. on Industry Applications, 2004, 40(3): 813-820.
[11]
Ramdane Lateb, Noureddine Takorabet, Farid Meibody Tabar. Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors[J]. IEEE Trans. on Magnetics, 2006, 42(3): 442-445.
[12]
Hanselman D C．Effect of skew, pole count and slot count on brushless motor radial force, cogging torque and back EMF[J]. IEE Proc. on Electr. Power App1., 1997, 144(5): 325-330.
[13]
Takeo Ishikawa, Gordon R Slemon. A method of reducing ripple torque in permanent magnet motors without skewing[J]. IEEE Trans. on Magnetics, 1993, 29(2): 2028-2031.
[14]
Liu Z J, Li J T, Jabbar M A. Cogging torque prediction by superposition of torque due to pole transition over slot[C].IEEE International Conference on Electric Machines and Drives, 2005: 1219-1224.
[15]
Wang Daohan, Wang Xiuhe, Yang Yubo, et al. Optimization for the asymmetric angles of magnetic pole to reduce cogging torque in inner-buried PM brushless DC motors[J]. Proceedings of the CSEE, 2008, 28(9): 66-70.
[16]
Ko H S, Kim K J. Characterization of noise and vibration sources in interior permanent-magnet brushless DC motors[J]. IEEE Trans on Magnetics, 2004, 40(6): 3482-3489.
[17]
Jeonghu Kwack, Seungjae Min, Jung Pyo Hong.Optimal stator design of interior permanent magnet motor to reduce torque ripple using the level set method[J].IEEE Trans. on Magnetics, 2010, 46(6): 2108-2111.
[18]
Kim S I, Lee J Y, Kim Y K, et al. Optimization for reduction of torque ripple in interior permanent magnet motor by using the Taguchi method[J]. IEEE Trans. on Magnetics, 2005, 41(4): 1796-1799.
[19]
Kioumarsi A, Moallem M, Fahimi B. Mitigation of torque ripple in interior permanent magnet motors by optimal shape design[J]. IEEE Trans. on Magnetics, 2006, 42(10): 3706-3711.
[20]
Qian Weizhe, Panda Sanjib K, Xu Jianxin. Torque ripple minimization in PM synchronous motors using iterative learning control[J].IEEE Trans. on Power Electronics, 2004, 19(2): 272-279.
[21]
Gieras J F. Analytical approach to cogging torque calculation of PM brushless motors[J]. IEEE Trans. on Industry Applications, 2004, 40(5): 1310-1316.
[22]
Zhu Z Q, Howe D. Analytical prediction of the cogging torque in radial field permanent magnet brushless motors[J]. IEEE Trans. on Magnetics, 1992, 28(2): 1371-1374.
[23]
Damir Zarko, Drago Ban, Thomas A Lipo, Analytical solution for cogging torque in surface permanent- magnet motors using conformal mapping[J]. IEEE Trans. on Magnetics, 2008, 44(1): 52-65.
[24]
Yang Yubo, Wang Xiuhe, Ding Tingting, Analysis of the optimization of the pole arc combination to reduce the cogging torque in PM motors[J]. Proceedings of the CSEE, 2007, 27(6): 7-11.
Yang Yubo, Wang Xiuhe.A method for reducing cogging torque by different slot widths in permanent magnet motors[J]. Transactions of China Electro-technical Society, 2005, 20(3): 40-44.
[27]
Zhu Z Q, Ruangsinchaiwanich S, Howe David. Synthesis of cogging torque waveform from analysis of a single stator slot[J]. IEEE Trans. on Industry Applications, 2006, 42(3): 650-657.
[28]
Zhu Z Q, Ruangsinchaiwanich S, Chen Y, et al. Evaluation of superposition technique for calculating cogging torque in permanent-magnet brushless machines[J]. IEEE Trans. on Magnetics, 42(5): 1597-1603.
