周兵, 陈乃祥. 双流道叶轮内部三维定常湍流数值模拟[J]. 清华大学学报 (自然科学版), 2005, 45(8): 1130-1133. Zhou Bing, Chen Naixiang. Numerical simulation of 3-D steady turbulent flow in a double channel impeller[J]. Journal of Tsinghua University (Science and Technology), 2005, 45(8): 1130-1133.
[2]
王振羽. 对旋式轴流通风机设计中的几个问题[J]. 风机技术, 1999(6): 15-17.
[3]
毛军, 杨立国, 郗艳红. 大型轴流风机叶片的气动弹性数值分析研究[J]. 机械工程学报, 2009, 45(11): 134-139. Mao Jun, Yang Liguo, Xi Yanhong. Numeric analysis of on the pneumatic elasticity of large axial-flow fan blade[J]. Journal of Mechanical Engineering, 2009, 45(11): 134-139.
[4]
Zhou Jianhui, Yang Chunxin. Parametric design and numerical simulation of the axial-flow fan for electronic evices[J]. IEEE Transactions on Components and Packaging Technologies, 2010, 33(2): 287-298.
[5]
Li Y, Ouyang H, Du Z. Experimental research on aerodynamic performance and exit flow field of low pressure axial flow fan with circumferential skewed blades[J]. Journal of Hydrodynamics, Ser. B, 2007, 19(5): 579-586.
[6]
王福军. 计算流体动力学分析-CFD原理与应用[M]. 北京: 清华大学出版社, 2004.
[7]
周封, 熊斌, 李伟力, 等. 大型电机定子三维流体场计算及其对温度场分布的影响[J]. 中国电机工程学报, 2005, 25(24): 128-132. Zhou Feng, Xiong Bin, Li Weili, et al. Numerical calculation of 3d stator fluid field for large electrical machine as well as influences on thermal field distribu- tion[J]. Proceedings of the CSEE, 2005, 25(24): 128- 132.
[8]
Yan Xiaokang, Wang Lijun, Zhang Jingsong, et al. Numerical and experimental investigation on effect of installation angle of rotor blade on axial flow fan[C]. 2010 International Conference on Mechanical and Electrical Technology (ICMET), 2010: 359-363.
[9]
宋玲. 风机试验台的CFD流场分析与试验研究[D]. 乌鲁木齐: 新疆农业大学, 2005.
[10]
Vad J, Bencze F. Three-dimensional flow in axial flow fans of non-free vortex design[J]. International Journal of Heat and Fluid Flow, 1998, 19(6): 601-607.
[11]
Shin Y H, Kim K H, Kang C S. Unsteady pressure measurements around rotor of an axial flow fan under stable and unstable operating conditions[J]. JSME International Journal Series B, 2005, 48(1): 56-64.
Huang Jiayou, Deng Haishun. Overload analysis and improved design for two step motor of counter rotating fan[J]. Compressor Blower & Fan Technology, 2004(5): 14-16.
[14]
Wang Zhenyu. Problems in design of counter rotating axial fan[J]. Compressor Blower & Fan Technology, 1999(6): 15-17.
[15]
Cho L, Choi H, Lee S, et al. Numerical and experi- mental analyses for the aerodynamic design of high performance counter-rotating axial flow fans[C]. American Society of Mechanical Engineers, 2009, 2: 231-244.
[16]
Shigemitsu T, Fukutomi J, Okabe Y. Performance and flow condition of small-sized axial fan and adoption of contra-rotating rotors[J]. Journal of Thermal Science, 2010, 19(1): 1-6.
[17]
李伟力, 杨雪峰, 顾德宝, 等. 多风路空冷汽轮发电机定子内流体流动与传热耦合计算与分析[J]. 电工技术学报, 2009, 24 (12): 24-31. Li Weili, Yang Xuefeng, Gu Debao, et al. Calculation and analysis of fluid flow and heat transfer of air- cooled turbo-generator with multipath ventilation[J]. Transactions of China Electrotechnical Society, 2009, 24(12): 24-31.
[18]
Lee K S, Kim K Y, Samad A. Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis[J]. Journal of Mechanical Science and Technology, 2008, 22(10): 1864-1869.
