Sam G Gibbs, Duane L Miller. Inferring power consumption and electrical performance from motor speed in oil-well pumping units[J]. IEEE Transactions on Industry Applications, 1997, 33(1): 187-193.
[2]
崔学深, 罗应立, 杨玉磊, 等. 周期性变工况条件下异步电机节能机理和节能途径[J]. 中国电机工程学报, 2008, 28(18): 90-97. Cui Xueshen, Luo Yingli, Yang Yulei, et al. Energy saving theory and approach for asynchronous motor under the periodically variable running condition[J]. Proceedings of the CSEE, 2008, 28(18): 90-97.
[3]
戴武昌, 赵新飞. 一种适用于抽油机的永磁同步电动机的研发[J]. 电机与控制学报, 2013, 17(2): 98-102. Dai Wuchang, Zhao Xinfei. Research of torque per- manent magnet synchronous motor used in pump jack [J]. Electric Machines and Control, 2013, 17(2): 98-102.
[4]
Luo Yingli, Cui Xueshen, Zhao Haisen, et al. A multi- function energy saving device with a novel power-off control strategy for beam pumping motors[J]. IEEE Transactions on Industry Applications, 2011, 47(4): 1605-1611.
[5]
张玉平. 高转差率特种三相异步电动机转子新材料变质处理试验研究[J]. 中国电机工程学报, 2001, 21(8): 89-93. Zhang Yuping. The study on the modification of new material used for high slip and special threephase asynchronous motor rotors[J]. Proceedings of the CSEE, 2001, 21(8): 89-93.
[6]
Gibbs S G. Design and diagnosis of deviated rod- pumped wells[S]. SPE 22787, 1991.
[7]
Dong Shimin, Yang Cui, et al. The dynamic simula- tion model and comprehensive simulation algorithm of the beam pumping system[C]. International Con- ference on Mechanical and Automation Engineering, Jiujiang, China, 2013.
[8]
饶建华, 刘宏昭, 李冬平. 定向井有杆抽油系统动态数值仿真与预测[J]. 石油机械, 2004, 32(8): 4-7. Rao Jianhua, Liu Hongzhao, Li Dongping, et al. Dynamic characteri-stics simulation and prediction of sucker rod pumping system in a directional well[J]. China Petroleum Machinery, 2004, 32(8): 4-7.
[9]
夏小琴, 韦化, 阳育德. 暂态稳定约束最优潮流的改进降阶内点算法[J]. 电工技术学报, 2012, 27(9): 87-93. Xia Xiaoqin, Wie Hua, Yang Yude. An improved reduced dimension interior point method for transient stability constrained optimal power flow[J]. Transac- tions of China Electrotechnical Society, 2012, 27(9): 87-93.
[10]
API RP 11L. Design calculation of sucker rod pumping system[S]. American Petroleum Institute, Washington, 1967.
[11]
Zhao Haisen, Liu Xiaofang, Luo Yingli, et al. Time- stepping finite element analysis on the influence of skewed rotors and different skew angles on the losses of squirrel cage asynchronous motors[J]. Sci China Tech Sci, 2011, 54: 2511-2519.
[12]
Zhao Haisen, Zhang Jian. A design method for cage induction motors withnon-skewed rotor bars[J]. IEEE Transactions on Magnetics, 2014, 50(2): 769-772.
[13]
帅智康, 肖凡, 涂春鸣, 等. 宽频域谐波谐振劣化机理及其抑制措施[J]. 电工技术学报, 2013, 28(12): 16-23. Shuai Zhikang, Xiao Fan, Tu Chunming, et al. Resonance degradation mechanism of wide-band frequency harmonics and the elimination strategy[J]. Transactions of China Electrotechnical Society, 2013, 28(12): 16-23.
[14]
赵海森, 刘晓芳, 罗应立, 等. 电压偏差条件下笼型感应电机的损耗特性[J]. 电机与控制学报, 2010, 14(5): 13-19. Zhao Haisen, Liu Xiaofang, Luo Yingli, et al. Losses characteristics of cage induction motors under voltage deviation conditions[J]. Electirc Machinces and Control, 2010, 14(5): 13-19.
王博, 赵海森, 李和明, 等. 用于模拟游梁式抽油机电动机动态负荷的测试系统设计及应用[J]. 中国电机工程学报, 2014, 34(21): 88-95. Wang Bo, Zhao Haisen, Li Heming, et al. Design and applications of the testing system with dynamic load for beam pumping motor[J]. Proceedings of the CSEE, 2014, 34(21): 88-95.
[20]
Ansari M N, Dalal A, Kumar P. Analysis of stray loss and its determination with equivalent circuit for double cage rotor induction motor[C]. Annual IEEE India Conference, Mumbai, 2013: 1-6.
